Loading...
Search for: abdollahi--hamid
0.113 seconds

    Physical Layer Authentication in the Internet of Things based on Deep Learning

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Majid (Author) ; Behroozi, Hamid (Supervisor)
    Abstract
    IoT security is an important step in the rapid development of its applications and ser-vices. Many security protocols have been defined to maintain security at higher communication layers, such as the transport layer and the application layer, but with the advent of quantum computers due to high-speed parallel computing, the previous methods are no longer secure and we have to establish security at lower layers such as the physical layer. The efficiency of IoT devices depends on the reliability of their message transmission. Cyber-attacks such as data injection, eavesdropping and man-in-the-middle can lead to security challenges. In this study, we propose a new deep learning based component... 

    Optimizing Transmisson from Distant Wind Farms

    , M.Sc. Thesis Sharif University of Technology Abdollahi Mansourkhani, Hamid Reza (Author) ; Hosseini, Hamid (Supervisor)
    Abstract
    Wind power is site dependent and is by nature partially dispatchable. Furthermore, good wind sites are far from grid. Due to these problems, and along with the existing limitations in the transmission networks, a comprehensive analysis over an extended time is needed to properly explore all potential wind sites for wind capacity allocation. This problem is computationally expensive and decomposition methods are required to break down this problem. Here Benders decomposition approach is used, which is a popular technique for solving large-scale problems, to decompose the original problem into a master and a subproblem. The master problem is a linear problem, which allocates wind capacity to... 

    Development and Application of Chemometric Methods for Hyperspectral Image Analysis for Authentication and Adulteration Detection in Food (Saffron and Turmeric)

    , Ph.D. Dissertation Sharif University of Technology Hashemi Nasab, Fatemeh Sadat (Author) ; Parastar Shahri, Hadi (Supervisor) ; Abdollahi, Hamid (Supervisor)
    Abstract
    The use of hyperspectral images to detect food fraud has become popular and it is necessary to develop chemometrics methods for analyzing the data from these images. Additionally, food authenticity has become a major challenge, and the focus of this thesis is on developing multivariate methods in chemometrics to extract useful information from data obtained from food authenticity verification using hyperspectral imaging (HSI). This thesis consists of six chapters. In the first chapter, a brief introduction to the fundamentals of hyperspectral imaging and food authenticity verification is presented. In the second chapter, the data structure of these images and chemometric methods including... 

    The effect of Ag incorporation on the characteristics of the polymer derived bioactive silicate phosphate glass-ceramic scaffolds

    , Article Boletin de la Sociedad Espanola de Ceramica y Vidrio ; Volume 61, Issue 6 , 2022 , Pages 653-663 ; 03663175 (ISSN) Paryab, A ; Godary, T ; Khalilifard, R ; Malek Khachatourian, A ; Abdollahi, F ; Abdollahi, S ; Sharif University of Technology
    Sociedad Espanola de Ceramica y Vidrio  2022
    Abstract
    In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

    The effect of Ag incorporation on the characteristics of the polymer derived bioactive silicate phosphate glass-ceramic scaffolds

    , Article Boletin de la Sociedad Espanola de Ceramica y Vidrio ; 2021 ; 03663175 (ISSN) Paryab, A ; Godary, T ; Khalilifard, R ; Malek Khachatourian, A ; Abdollahi, F ; Abdollahi, S ; Sharif University of Technology
    Sociedad Espanola de Ceramica y Vidrio  2021
    Abstract
    In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

    Hierarchical Optical Network-on-Chip Based on Hypercube Topology

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Meisam (Author) ; Hesabi, Shahin (Supervisor)
    Abstract
    According to prediction of ITRS, power consumption and bandwidth of processors' interconnection, will be the most major bottleneck of the System-on- Chips (SoCs) in the future. Therefore, in MultiProcessor System-on-Chip (MPSoC) architectures, the design constraints will be altered from "Computational Constraints" to "Communicational Constraints". There are three kinds of communications in the surface of the chip: Global, median and local. The main difference between global and local connections is that the length of latter one will be changed with technology. In other words, it is scalable like processor's elements while the length of global connections is practically constant. Even though... 

    Analysis of Customer Services Independance Strategy in Electricity Section in Iran, Based on Dynamic Capabilities

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Ameneh (Author) ; Kermanshah, Ali (Supervisor)
    Abstract
    Opportunities for creating value are shifting from managing tangible assets to managing knowledge based strategies that deploy on organizations' tangible assets: customer relationship, innovative products and services, high quality, and responsive operation processes, information technology and databases and employee capability skills and innovation" (Strategy Focused Organization, Norton, Kaplan; 1996). As organizations' value creating process shifts, learning has become one of the most important factors in value creation, and as a consequence dynamic capabilities creation. This research is concentrated on Electric Distribution Companies in Tehran region and studies knowledge management as... 

    Can Religious Disagreement Reduce the Justification and Rationality of our Beliefs?

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Jalal (Author) ; Taheri, Ali (Supervisor)
    Abstract
    It is undeniable that there is a great disagreement in the every field of religion. Reductionists argue that awareness of disagreements reduces the justification and rationality of beliefs, including religious beliefs. In contrast, non-reductionists believe that while reductionism may be true in other domains, it is not necessarily true in religion, because religious beliefs have characteristics that can deny a reductionist argument. They are in the realm of religion. In this thesis, I will discuss issues related to those characteristics that can deny reductionist argument in the realm of religion. In this thesis, I try to show that the arguments and responses presented in defense of the... 

    Evaluating the Low Temperature Behavior of Master Curves of Modified Binder and Investigating the a Parameter in Las Test

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Farhad (Author) ; Tabatabaee, Nader (Supervisor)
    Abstract
    Master curves describe the behavior of asphalt binders over a wide range of temperatures and loading frequencies which are utilized by various predictive models in design and analysis procedure of asphalt mixtures. Frequency sweep test is extensively used for construction of master curves within the temperature range of 4 ̊C to 82◦̊C and frequency range of 0.01 to 30 Hz. There is a concern that master curves are unable to accurately represent the low temperature (below 4 C) behavior of binders. In this study a new cyclic loading pattern for the bending beam rheometer (BBR) test was utilized to conduct the low temperature tests and generate an isotherm compliance curve for incorporating the... 

    Effects of Mechanical Loading Environment on Aneurysm

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Rahim (Author) ; Abedian, Ali (Supervisor)
    Abstract
    Human body is subjected to body accelerations or vibrations in several circumstances. During gravitational changes, the hydrostatic pressure gradient along the body axis changes, and then body fluids are redistributed. Prolonged exposure to high level external acceleration may lead to serious or even fatal situations on account of disturbances in blood flow. Due to physiological importance of body acceleration many theoretical investigations have been carried out for the flow of blood under the influence of body acceleration. In this study, the mechanical loads that pilots experience during flight are considered. The aim of the present study is to investigate the effects of mechanical... 

    Inventory Routing and Pricing Problem in a Supply Chain

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Hassan (Author) ; Hajji, Alireza (Supervisor)
    Abstract
    Nowadays competition in business world has increased drastically. Under these competitive circumstances, it is the supply chains that compete against each other rather than individual firms. Accordingly trying to achieve integrated and synchronized management of activities within a supply chain has become inevitable. Recently researchers have found interest in a particular problem in a supply chain and that is to minimize inventory and routing costs in a supply chain. This problem is known as Inventory Routing Problem (IRP) and has been intensely examined in past few years. In this thesis we will try to expand this well-known problem in pricing dimension. We call this new problem “Inventory... 

    Rings virtually satisfying a polynomial identity

    , Article Journal of Pure and Applied Algebra ; Volume 198, Issue 1-3 , 2005 , Pages 9-19 ; 00224049 (ISSN) Abdollahi, A ; Akbari, S ; Sharif University of Technology
    2005
    Abstract
    Let R be a ring and f(x1,..., xn) be a polynomial in noncommutative indeterminates x1,..., xn with coefficients from ℤ and zero constant. The ring R is said to be an f-ring if f(r1,..., rn) = 0 for all r1,..., rn of R and a virtually f-ring if for every n infinite subsets X1,..., Xn (not necessarily distinct) of R, there exist n elements r1 ∈ X1,...,rn ∈ Xn such that f(r1,..., rn) = 0. Let R* be the 'smallest' ring (in some sense) with identity containing R such that Char (R) = Char (R*). Then denote by ZR the subring generated by the identity of R* and denote by f̄R the image of f in ZR [x1,..., xn] (the ring of polynomials with coefficients in ZR in commutative indeterminates x1,..., xn).... 

    Implementation Of Competency Assessment Of Project Manager in Project Oriented Organizations

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Saeed (Author) ; Haji, Alireza (Supervisor)
    Abstract
    Although, planning and control systems improved, but most of projects have some Problems such as long time and high cost. In project oriented organizations which Perform several projects have more problems. An important reason of these Problems is lack of skill and competency of executive factors and project managers In planning and control. These persons are chosen base on organization Relationship, not systematically. One way to become successful in projects is Chose and assessment of project managers and executes in right way. "System of Competency and assessment of project manager" is offered to solve this problem. According to this system, at first projects are defined and grouped base... 

    Evaluation of Multi-criteria Decision-making Capabilities in Construction Projects

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Azadeh (Author) ; Haji, Alireza (Supervisor)
    Abstract
    Today, the major part of the capital of each country, especially developing countries, is devoted to its construction and construction projects. On the other hand, one of the growth and economic factors of any society is the success of its development projects. In fact, one of the activities of developing countries to build economic infrastructure is the implementation of infrastructure development projects that account for the bulk of the country's budget annually, and therefore the principled planning of these projects is from the requirements and it is necessary to achieve the lowest cost-to-productivity ratio. In Iran, which is considered as a developing country, a significant amount is... 

    Application of ideal temperature gradient technology to optimize the chemical exchange and distillation process of boron isotopes separation by (CH3)2O-BF3 complex

    , Article Chemical Engineering and Processing: Process Intensification ; Volume 76 , February , 2014 , Pages 26-32 ; ISSN: 02552701 Abdollahi, M ; Ahmadi, S. J ; Sharif University of Technology
    2014
    Abstract
    To exert the optimum effect, the chemical exchange process to boron isotope separation was investigated. In this enrichment method the distillation of dimethyl ether-boron trifluoride complex, which was one of the most efficient industrial methods for purification of isotope boron-10, was optimized. In chemical exchange process of boron isotopes separation two chemical reactions occur. The first one is the decomposition reaction that is an endothermic reaction. The second one is the exchange reaction that is a pyrogenic reaction. With increasing temperature, the decomposition reaction is speeded while the exchange reaction is slowed down. Affecting on both decomposition and exchange... 

    A modeling tool for a new definition of stochastic activity networks

    , Article Iranian Journal of Science and Technology, Transaction B: Engineering ; Volume 29, Issue 1 B , 2005 , Pages 79-92 ; 03601307 (ISSN) Abdollahi Azgomi, M ; Movaghar, A ; Sharif University of Technology
    2005
    Abstract
    Stochastic activity networks (SANs) are a powerful and flexible extension of Petri nets. Modeling and analysis with Petri nets and their extensions need a software tool to help to construct and analyze the models. The original definition of SANs has been used as a modeling formalism in several tools. In this paper, we introduce a modeling tool called SharifSAN, which is based on a new definition of SANs. This modeling tool is useful for both the verification and performance evaluation of systems. The functional aspects of a system are verified by model checking branching temporal logic formulas, whereas its performance aspects are evaluated using some analytic and simulative methods. The... 

    Modeling and evaluation with object stochastic activity networks

    , Article Proceedings - First International Conference on the Quantitave Evaluation of Systems, QEST 2004, Enschede, 27 September 2004 through 30 September 2004 ; 2004 , Pages 326-327 ; 0769521851 (ISBN) Abdollahi Azgomi, M ; Movaghar, A ; Sharif University of Technology
    2004
    Abstract
    Stochastic activity networks (SANs) are a stochastic generalization of Petri nets. SAN models have been used for performance, dependability and performability evaluation and are supported by several powerful modeling tools. We have recently introduced object stochastic activity networks (OSANs) to overcome some restrictions of these models. OSANs integrate the concepts of object-orientation into SAN models. Elements of OSANs and their submodels are defined as classes. In this paper, we briefly introduce OSANs and SANBuilder tool for modeling and evaluation with these models. © 2004 IEEE  

    Efficient evaluation of CSAN models by state space analysis methods

    , Article 2006 International Conference on Software Engineering Advances, ICSEA'06, Tahiti, 29 October 2006 through 3 November 2006 ; 2006 , Pages 57-62 ; 0769527035 (ISBN); 9780769527031 (ISBN) Abdollahi Azgomi, M ; Movaghar, A ; Sharif University of Technology
    IEEE Computer Society  2006
    Abstract
    We have recently introduced a high-level extension for stochastic activity networks (SANs) called coloured stochastic activity networks (CSANs). CSANs have several distinguishing properties, which make them quite appropriate for modeling and evaluation of software performance and dependability. CSANs have introduced a construct called coloured place for data manipulation. A coloured place holds a list of tokens of a userdefined token type. CSAN models can be evaluated by state space analysis techniques or discrete-event simulation. However, their state spaces will become very large, even for a small CSAN model. For efficient evaluation of these models by state space analysis methods, we will... 

    Modeling and evaluation of software systems with object stochastic activity networks

    , Article 2006 International Conference on Software Engineering Advances, ICSEA'06, Tahiti, 29 October 2006 through 3 November 2006 ; 2006 , Pages 58-63 ; 0769527035 (ISBN); 9780769527031 (ISBN) Abdollahi Azgomi, M ; Movaghar, A ; Sharif University of Technology
    IEEE Computer Society  2006
    Abstract
    Stochastic activity networks (SANs) are a stochastic generalization of Petri nets. SAN models have been used to evaluate a wide range of systems and are supported by several modeling tools. We have introduced object stochastic activity networks (OSANs) to overcome some restrictions of these models. OSANs integrate the concepts of object-orientation into SAN models. Elements of OSANs and their submodels are defined as classes. OSANs are more appropriate that most other objectoriented or high-level extensions of Petri nets for application on software systems. In this paper, we will present the definitions, behavior and an example of OSAN models. The objectorientation of OSANs and the... 

    Unstaedy Boundary Layer Measurement over an Airfoil in Plunging Motion

    , M.Sc. Thesis Sharif University of Technology Abdollahi, Rezvan (Author) ; Soltani, Mohammad Reza (Supervisor)
    Abstract
    An experimental investigation of unsteady boundary layer over a wind turbine blade conducted in a subsonic wind tunnel. The experiment performed at different positions along the airfoil chord. Model was oscillated with amplitude of ±5 cm. Reynolds number, based on airfoil chord, ranged 3˟105 upto 6.5˟105 and the reduced frequency ranged from 0.0055 to 0.0981. Velocity profile measured with a total pressure rake. The data were reduced via a low-pass filter. Increasing the reduced frequency, the velocity profile increases the level on turbulence fluctuation and becomes more attached to the surface.