Sharif Digital Repository

Using the general structure of the vacuum polarization tensor Πμν(k0,k) in the infrared (IR) limit, k0→0, the ring contribution to the QED effective potential at finite temperature and the nonzero magnetic field is determined beyond the static limit, (k0→0, k→0). The resulting ring potential is then studied in weak and strong magnetic field limits. In the weak magnetic field limit, at high temperature and for α→0, the improved ring potential consists of a term proportional to T4α5/2, in addition to the expected T4α3/2 term arising from the static limit. Here, α is the fine structure constant. In the limit of the strong magnetic field, where QED dynamics is dominated by the lowest Landau... 

Inverse method and artificial neural network were employed in modeling the rheological behavior of the AZ61 Mg alloy. The hot deformation behavior of these alloys was investigated by compression tests in the temperature range 250-350 °C and strain rate range 0.0005-0.1 s-1. Investigation of stress-strain curves and microstructure of the compression specimen illustrate occurrence of dynamic recrystallization. To determining parameters of two suggested constitutive equations global optimization technique, genetic algorithm, was used. The predicted results by inverse method and ANN depicted a good agreement with the experimental data even if the ANN results has shown the best predicted... 

In the present study, polylactic acid (PLA)/polyethylene glycol (PEG)/multiwalled carbon nanotube (MWCNT) electrospun nanofibrous scaffolds were prepared via electrospinning process and their applications for the anticancer drug delivery system were investigated. A response surface methodology based on Box-Behnken design (BBD) was used to evaluate the effect of key parameters of electrospinning process including solution concentration, feeding rate, tip-collector distance (TCD) and applied voltage on the morphology of PLA/PEG/MWCNT nanofibrous scaffolds. In optimum conditions (concentration of 8.15%, feeding rate of 0.2 mL/h, voltage of 18.50 kV and TCD of 13.0 cm), the minimum experimental... 

The finite element method has been used to predict the stress intensity factors for cracked annular discs under constant central torque. Linear elastic fracture mechanics finite element analyses have been performed and the results are demonstrated in the form of crack configuration factors. To this end, the extensive ranges of crack configuration factors have been employed while considering the effect of disc stiffness. Then, the finite element results are applied to develop equivalent prediction equations using a statistical multiple nonlinear regression model. The accuracy of this model is measured using a multiple coefficient of determination, R2, where 0 ≤R2 ≤1. This coefficient is found... 

The electro-mechanical impedance (EMI) method has been accepted as an effective technique for detecting damages in the Structural health monitoring (SHM). EMI at any point of the structure depends on material properties, geometry and boundary conditions that all appears in dynamic stiffness of the structure. In spite of the expensive experimental methods for measuring the mechanical impedance, or the cheaper one electromechanical impedance, of structures, various analytical methods could be substitutions for them. In this paper, an analytical method is developed to obtain the EMI response of L-shaped beams through calculating the dynamic stiffness of the structure. To verify the model, an... 

Pulsating heat pipes (PHPs) are interesting heat transfer devices. Their simple, high maintaining, and cheap arrangement has made PHPs very efficient compared to conventional heat pipes. Rotating closed loop PHP (RCLPHP) is a novel kind of them, in which the thermodynamic principles of PHP are combined with rotation. In this paper, effect of rotational speed on thermal performance of a RCLPHP is investigated experimentally. The research was carried out by changing input power (from 25. W to 100. W, with 15. W steps) and filling ratio (25%, 50%, and 75%) for different rotational speeds (from 50. rpm to 800. rpm with an increment of 125. rpm). The results presented that at a fixed filling... 

The studies surrounding the concept of microdroplets have seen a dramatic increase in recent years. Microdroplets have applications in different fields such as chemical synthesis, biology, separation processes and micro-pumps. This study numerically investigates the effect of different parameters such as Capillary number, Length of droplets, and Magnetic Bond number on the splitting process of ferrofluid microdroplets in symmetric T-junctions using an asymmetric magnetic field. The use of said field that is applied asymmetrically to the T-junction center helps us control the splitting of ferrofluid microdroplets. During the process of numerical simulation, a magnetic field with various... 

Finite element method has been implemented to predict stress intensity factors (SIFs) for radial cracks in annular discs under constant angular velocity. Effects of internal and external uniform pressure on the SIFs have also been considered. Linear elastic fracture mechanics finite element analyses have been performed and results are presented in the form of crack configuration factors for a wide range of components and crack geometry parameters. These parameters are chosen to be representative of typical practical situations. The extensive range of crack configuration factors obtained from the analyses is then used to develop equivalent prediction equations via a statistical multiple... 

The hot workability of a wrought 49.8 Ni-50.2 Ti (at pct) alloy was assessed using the hot compression tests in temperature range of 700-1000°C, strain rate of 0.001-1s-1, and the total strain of 0.7. The constitutive equations of Arrhenius-type hyperbolic-sine function was used to describe the flow stress as a function of strain rate and temperature. The preferable regions for hot workability of the alloy were achieved at Z (Zener-Holloman parameter) values of about 109-1013 corresponding to the peak efficiency of 20-30% in the processing map. However, a narrow area in the processing map including the deformation temperature of 1000°C and strain rate of 1s-1 is inconsistent with the related... 

The influence of Cu addition on the hot deformation behavior of NiTi shape memory alloys was investigated using hot compression test. A series of alloys with different Cu contents of Ti50.4Ni49.6-xCux (x = 0, 3, 5, 7 at.%) were deformed under compression to a true strain of 0.7 at the temperature range of 700-1000 °C with 100 °C intervals and constant strain rate of 0.1 s-1. The stress-strain curves showed that the addition of Cu to NiTi alloy made the flow curves shift upward. This was confirmed by the calculated critical stress, σc, obtained from inflections in θ-σ plots, which is attributed to the formation of high strength Cu containing precipitates and solid solution hardening caused by... 

Polyethylene oxide (PEO)/chitosan (CS)/graphene oxide (GO) electrospun nanofibrous scaffolds were successfully developed via electrospinning process for controlled release of doxorubicin (DOX). The SEM analysis of nanofibrous scaffolds with different contents of GO (0.1, 0.2, 0.5 and 0.7 wt.%) indicated that the minimum diameter of nanofibers was found to be 85 nm for PEO/CS/GO 0.5% nanofibers. The π-π stacking interaction between DOX and GO with fine pores of nanofibrous scaffolds exhibited higher drug loading (98%) and controlled release of the DOX loaded PEO/CS/GO nanofibers. The results of DOX release from nanofibrous scaffolds at pH 5.3 and 7.4 indicated strong pH dependence. The... 

The effect of high-energy ball milling on the textural evolution of alumina nanopowders (compaction response, sinter-ability, grain growth and the degree of agglomeration) during post sintering process is studied. The applied pressure required for the breakage of the agglomerates (P y) during milling was estimated and the key elements of compressibility (i.e. critical pressure (P cr) and compressibility (b)) were calculated. Based on the results, the fracture point of the agglomerates decreased from 150 to 75 MPa with prolonged milling time from 3 to 60 min. Furthermore, the powders were formed by different shaping methods such as cold isostatic press (CIP) and uniaxial press (UP) to better...