Sharif Digital Repository

One of the major challenges in the manufacturing parts, especially metals, is turning with good/excellent surface quality, which has a significant effect on the fatigue strength of the industrial components. Selecting incorrect or unsuitable values of machining parameters leads to vibration instability in the cutting tool and as a result, excessive roughness is created on the product’s surface. Therefore, one of the ways to reduce the roughness factor and increase the product fatigue life is to control the relative slip and vibration between the cutting tool and the workpiece. To achieve this goal, the authors attempted to investigate the simultaneous effects of tool overhang and cutting... 

This paper deals with the mixed convective heat transfer of nanofluids through a concentric vertical annulus. Because of the non-adherence of the fluid-solid interface in the presence of nanoparticle migrations, known as slip condition, the Navier's slip boundary condition was considered at the pipe walls. The employed model for nanofluid includes the modified two-component four-equation non-homogeneous equilibrium model that fully accounts for the effects of nanoparticles volume fraction distribution. Assuming the fully developed flow and heat transfer, the basic partial differential equations including continuity, momentum, and energy equations have been reduced to two-point ordinary... 

Residual stresses, created in a steel beam by elastic-plastic bending, are predicted using an approximate analysis and the finite element method. The predictions are compared to experimental measurements obtained from the application of incremental centre hole drilling, deep hole drilling and neutron diffraction methods. Finite element simulations of the incremental centre hole drilling and deep hole drilling methods applied to the predicted residual stresses permitted an assessment of their ability to reconstruct the stresses. An analytical reconstruction analysis using an Airy stress function together with boundary and equilibrium conditions is developed and applied to the predictions and... 

This paper presents a hybrid QR decomposition (QRD) design that reduces the number of computations and increases their execution parallelism by using a unique combination of Multi-dimensional Givens rotations, Householder transformations and conventional 2-D Givens rotations. A semi-pipelined semi-iterative architecture is presented for the QRD core, that uses innovative design ideas to develop 2-D, Householder 3-D and 4-D/2-D configurable CORDIC processors, such that they can perform the maximum possible number of vectoring and rotation operations within the given number of cycles, while minimizing gate count and maximizing the resource utilization. Test results for the 0.3 mm 2 QRD chip,... 

Many classes of applications require Quality of Service (QoS) guarantees from the system interconnect. In Networks-on-Chip (NoC) QoS guarantees usually translate into bandwidth and latency constraints for the traffic flows and require hardware support in the NoC fabric and its interfaces. In this article we present a novel NoC synthesis framework to automatically build networks that meet hard latency constraints of end-to-end traffic streams without requiring specialized hardware for the network components. The hard latency constraints are met by carefully designing the NoC topology and selecting the appropriate routes for flow using lean best-effort network components. We perform... 

Histidine rich protein II derived peptide (HRP II 169-182) was investigated by molecular dynamics, MD, simulation and 17O electric field gradient, EFG, tensor calculations. MD simulation was performed in water at 300 K with α-helix initial structure. It was found that peptide loses its initial α-helix structure rapidly and is converted to random coil and bent secondary structures. To understand how peptide structure affects EFG tensors, initial structure and final conformations resulting from MD simulations were used to calculate 17O EFG tensors of backbone carbonyl oxygens. Calculations were performed using B3LYP method and 6-31 + G* basis set. Calculated 17O EFG tensors were used to... 

There are different well-established strategies for making a process plant inherently safer. The benefits of applying these strategies on reducing the overall risk inside a plant are obvious. However, some of these changes are rejected many times because they appear to be too costly. But if the effects of applying inherently safer design strategies are investigated not only on the processing costs of a plant but also on the potential accident costs, the decision would in fact be different. In this paper an optimization procedure is proposed which integrates both processing and accident costs for different design schemes. In this procedure, some of the design variables are chosen with regard... 

In this study, a well-known Computational Fluid Dynamics software, so-called Fire Dynamics Simulator (FDS), has been used to simulate multiple ethanol pool fire scenarios. Influences and reciprocal impacts in terms of dynamics and growth of the pool fires have been investigated. Heat release rates temperature and flame shapes have been monitored as the main outputs of the simulations. Based on the simulation results, it can be concluded that the amounts of mass burning rate, the radiation energy and the pool fire flame height were significantly higher in multiple pool fires, when compared with the theoretical values obtained by the mere summation of single pool fires. Furthermore, the... 

There are different well-established strategies for making a process plant inherently safer. The benefits of applying these strategies on reducing the overall risk inside a plant are obvious. However, some of these changes are rejected many times because they appear to be too costly. But if the effects of applying inherently safer design strategies are investigated not only on the processing costs of a plant but also on the potential accident costs, the decision would in fact be different. In this paper an optimization procedure is proposed which integrates both processing and accident costs for different design schemes. In this procedure, some of the design variables are chosen with regard... 

In this paper, a new method based on Fuzzy theory is presented to estimate the occurrence possibility of vapor cloud explosion (VCE) of flammable materials. This new method helps the analyst to overcome some uncertainties associated with estimating VCE possibility with the Event Tree (ET) technique. In this multi-variable model, the physical properties of the released material and the characteristics of the surrounding environment are used as the parameters specifying the occurrence possibility of intermediate events leading to a VCE. Factors such as area classification, degree of congestion of a plant and release rate are notably affecting the output results. Moreover, the proposed method... 

Detection and classification of ventricular complexes from the ECG is of considerable importance in Holter and critical care patient monitoring, being essential for the timely diagnosis of dangerous heart conditions. Accurate detection of premature ventricular contractions (PVCs) is particularly important in relation to life-threatening arrhythmias. In this paper, we introduce a model-based dynamic algorithm for tracking the ECG characteristic waveforms using an extended Kalman filter. The algorithm can work on single or multiple leads. A "polargram"--a polar representation of the signal--is introduced, which is constructed using the Bayesian estimations of the state variables. The polargram... 

In this paper, we describe a Gaussian wave-based state space to model the temporal dynamics of electrocardiogram (ECG) signals. It is shown that this model may be effectively used for generating synthetic ECGs as well as separate characteristic waves (CWs) such as the atrial and ventricular complexes. The model uses separate state variables for each CW, i.e. P, QRS and T, and hence is capable of generating individual synthetic CWs as well as realistic ECG signals. The model is therefore useful for generating arrhythmias. Simulations of sinus bradycardia, sinus tachycardia, ventricular flutter, atrial fibrillation and ventricular tachycardia are presented. In addition, discrete versions of... 

An analytical method for reconstructing residual stresses within axisymmetric cylinders is presented. The method uses the stress equilibrium and boundary conditions together with an Airy stress function that satisfies these conditions. The method allows the reconstruction of residual stresses from limited measurements. The analysis is also coupled to a least squares approximation and a regularization analysis to provide stability of the inverse problem. The application of the method is demonstrated for four cases; two correspond to analytical solutions for residual stresses created during autofrettage and two sets of experimental results for through wall measurements of residual stresses. In... 

Cemented coarse-grained alluvium is present in a vast area of Tehran city. Iran including its suburbs. This deposit consists of gravely sand to sandy gravel with some cobbles and is dominantly cemented by carbonaceous materials. In order to understand the mechanical behaviour of this soil, a series of triaxial compression tests were performed on uncemented, artificially cemented and destructured samples. Hydrated lime was used as the cementation agent for sample preparation to model the Tehran deposit. The tests were performed on cemented samples after an appropriate time for curing. The tests on cemented samples show that a shear zone appears as the shear stress approaches the peak shear... 

Theoretical calculations of structural parameters, 57Fe, 14N and 17O electric field gradient (EFG) tensors for full size-hemin group have been carried out using density functional theory. These calculations are intended to shed light on the difference between the geometry parameters, nuclear quadrupole coupling constants (QCC), and asymmetry parameters (ηQ) found in three spin states of hemin; doublet, quartet and sextet. The optimization results reveal a significant change for propionic groups and porphyrin plane in different spin states. It is found that all principal components of EFG tensor at the iron site are sensitive to electronic and geometry structures. A relationship between the... 

An analytical solution is presented that reconstructs residual stress field from limited and incomplete data. The inverse problem of reconstructing residual stresses is solved using an appropriate form of the airy stress function. This function is chosen to satisfy the stress equilibrium equations together with the boundary conditions for a domain within a convex polygon. The analytical solution is demonstrated by developing a reference solution from which selected "measurement" points are used. An artificial error is then randomly added to "measurement" points for studying the stability of the reconstruction method utilizing Tikhonov- Morozov regularization technique. It is found that there... 

We present a study of the Fundamental Plane (FP) for a sample of 71 dwarf galaxies in the core of the Coma cluster in the magnitude range -21 < M I < -15. Taking advantage of the high-resolution DEIMOS spectrograph on Keck II for measuring the internal velocity dispersion of galaxies and high-resolution imaging of the Hubble Space Telescope (HST)/ACS, which allows an accurate surface brightness modelling, we extend the FP of galaxies to luminosities of ~1 mag fainter than all the previous studies of the FP in the Coma cluster. We find that the scatter about the FP depends on the faint-end luminosity cut-off, such that the scatter increases for fainter galaxies. The residual from the FP... 

Welding process is widely used in manufacturing of many important engineering components. For such structures, the most important problem is the development of residual stresses and distortion due to welding. Welding tensile residual stresses have a detrimental effect and play an important role in an industrial environment. Crack initiation and propagation in static or fatigue loading, or in stress corrosion can be greatly accelerated by welding tensile stresses. Practically, however, it is often very difficult to characterize the residual stress state completely, while the knowledge of the complete residual stress distribution in structures is essential for assessing their safety and... 

At the present research, a new analytical model is developed for the impact of a deformable blunt projectile to metallic targets using the plastic stress wave propagation theory and the momentum equations. At this model, the deformation of the projectile is considered, too. Also, the effects of dishing and plugging phenomena on failure of the target are investigated. All of the obtained results are compared with the experimental and other available analytical results where good agreement has been observed. The other outcome of this research is a new definition for the penetration stages which includes 9 ones. Motion equations are derived for each of these stages, accordingly  

In this paper an analysis is presented to determine the distribution of a residual stress field from a limited incomplete set of measurements obtained from shot-peened round steel bars. Using an Airy stress function as the primary unknown the axisymmetric stress equations are solved directly. In this new method there exists the flexibility to impose physical conditions that govern the behavior of residual stress to achieve a meaningful complete stress field. This new method aims to achieve the best agreement between the model prediction and limited measured stress components in the sense of least squares approximation. The power of this new method is demonstrated by analyzing experimental...