Sharif Digital Repository

In the present study, the effects of increasing the value of shale gas production, either due to increased production or price increases, have been studied on economic variables such as employment, wage, property value and the number of births. In this regard, the data for each of these variables was used at the county level in the United States of America between 2000 and 2011. In order to estimate the desired effects, counties are divided into two types of boom and non-boom counties. The findings indicate that increasing natural gas production will lead to more employment and wage growth in boom counties than non-boom counties. Also, during the period of increasing production, the value of... 

In this study, orthosilicate materials with chemical formula of Li2MSiO4 (M one or two transition metal/metals) were investigated experimentally and theoretically as cathode material of Li-ion batteries. The most important material in this category i.e. Li2FeSiO4 was synthesized by three methods including nitrate-based sol-gel, oxalate-based solid state reaction and oxide-based solid state reaction. Based on XRD and SEM evaluations, grain size of synthesized powders was estimated to be between 15 to 100 nanometers. Of these three methods, oxide-based solid state reaction was employed in this study for the first time. This syntheses method is very important due to the significant lower... 

This work describes a new approach to the so called “Engineering Requirements Process” based on abilities to develop a meaningful task. We first describe how a meaningful is created from scratch and then we explain how requirements could be added to a level where the predefined task is no-longer doable. The process is then applied to design of an aircraft wing to show how requirements could be avoided during a design process. The method is expected to be applicable to all aircraft sub-systems and parts. The process is particularly useful where all design requirements are not available at once, rather they increase as time goes on and new stakeholders become apparent. In this work, we have... 

Researchers have long considered the phenomenon of parametric amplification. This phenomenon is introduced first in nonlinear structures and then in limited systems of time-varying linear structures. Time-modulated systems have many capabilities, such as amplification, non-reciprocity, and other phenomena in wave propagation. So far, time-varying circuits have been studied in terms of stability and analytical solution. The purpose of this project is to investigate parametric amplification in time-varying linear systems. Studying a structure under a circuit model is essential to other analyses practically implemented in various frequency ranges from microwave to light. As a result, this... 

In this dissertation, the application of frequency and space diversities in radar target parameter estimation are investigated. On this basis, multi-frequency signal is used to improve the range resolution, array structure is used to increase the angle estimation accuracy and the merger of the multi-frequency signal and array structure are used to increase the maximum number of targets that can be uniquely identified.Considering the desirable properties of multi-frequency signals such as high bandwidth efficiency, high range resolution achievement without chip length decrease and …, there has been increased interest in the vast area of research on the design of such signals that has... 

Target recognition techniques based on micro Doppler phenomenon are popular because they are applicable even on low resolution radars, in contrast to other techniques such as High Resolution Range Profile (HRRP) which need high resolution in range or angle. Usually, main purpose of such techniques is generating robust features against target initial state, velocity, aspect angle, etc. rather than features which exactly identify a target. Main approaches in the literature are based on time-frequency transforms (TFT) such as spectrogram in order to generate features to classify targets, but in this thesis, we propose a totally different method using Recurrence Plot for generating features... 

In this research with Finite Element Methods in ABAQUS, numerical modeling has done in three-dimensions, which can be used to determine the effect of different factors on the surface settlement. Also, various factors such as geotechnical conditions, tunnel diameter,tunnel depth, the impact of the thickness of the segments and the amount of eccentricity of the structure relative to the longitudinal axis of the tunnel considered in this study. Face Pressure Supports, and Grout Injection Pressures are taken into account, too.Tunnel drilling causes a change in the displacement area and creates a changing zone around the tunnel. In this regard, not only adjacent buildings will be affected by... 

Proton precession magnetometers are one of the most sensitive scalar magnetic sensors. Their function is based on Zeeman effect and also nuclear magnetic resonance phenomena. In this project we have designed and implemented needed coils, swithching and signal detection circuits. Because of extremely high sensitivity of this sensor to induced noises and also gradient of earth’s magnetic fileld, detection of precession signal needs design of low noise electronic circuits with special EMC considerations. The implemented system in this project contains different blocks, such as switching circuit and its related control unit, amplifier, filter and frequency meter. Using this system, the obtained... 

Effective field theory is a practical method for model building and explaining experimental/observational data. These theories are constructed based on knowing low energy degrees of freedom and symmetries (accidental or fundamental). By construction, these theories are applicable up to a cut-off scale and their predictions beyond that are not reliable. For applications to higher energies a UV completion is needed through which modifications are applied or new heavy degrees of freedom are introduced. In order to complete a theory in a Wilsonian approach, scattering amplitudes must satisfy some constraints. These constraints are derived from basic assumptions like Lorentz invariance,... 

Numerous structures which are involved in seismic soil-pile-structure interaction have been destroyed. Considering complexities which exist in soil-pile interaction problems and lack of precise methods without imperfect bases, it is necessary to use numerical methods for analyzing soil-pile interaction problems. In this research, three-dimensional modeling and studying the effect of changing soil and pile parameters on the behavior of pile under earthquake loading is performed using finite difference software, FLAC3D. The soil in this model has a softening behavior. Real earthquake spectrum has been applied into the model as the acceleration time history at the bedrock level. The results of... 

Suction caisson is a relatively new technology which was introduced about 30 years ago for the first time and after several investigations, was found its position in the oil industry and construction of anchorages, during previous decade. So nowadays, it is the most effective and economical choice as the mooring of offshore structures in comparison with the other foundations. Suction caisson is a hollow cylinder with an open bottom and a closed top. After placement on the seafloor, the caisson first penetrates into the soil by its self weight and then inserts into the ground by pumping water out of it. Although many researchers have attempted to understand the behavior of suction caissons... 

Modern communication and space systems such as satellite communication devices, radars, SAR and radio astronomy interferometers are realized with large antenna arrays since this kind of radiating systems are able to generate radiation patterns with high directivity and resolution. In such a framework, conventional arrays with uniform inter-element spacing could be not satisfactory in terms of costs and dimensions. An interesting alternative is to reduce the array elements obtaining the so called ‘ thinned arrays’. Large thinned arrays have been exploited because of their advantages in terms of weight,consumption, hardware complexity, and cost over the... 

Multi-period Value-at-Risk (VaR) forecasting is important for risk management. Financial institutions especially commercial banks according to Basel Committee regulations for capital adequacy in “Internal Approach”, should forecast their VaR for multi-period horizons (longer than one day). The most conventional approach for forecasting multi-period VaR is scaling one-day forecasted VaR that is called “square root of time rule”; therefore most works in this area have been focused on forecasting one-day VaR. In this study, we review performance of a wide range of different methods in forecasting multi-period VaR. The results of our study show that historical simulation performs weakly in... 

The current global economy challenges and the importance of maintaining a sustainable development strategy has increasingly bolded the importance of construction productivity measures. This research describes the results of a running research that is to find the most critical factors affecting the productivity of high rise concrete building projects in developing countries. To achieve that, we have conducted Delphi method in two phases. In the first phase we had a brainstorming program with construction experts from owner organizations, construction contractors and designing engineers to identify factors that have influenced productivity in recent concrete building construction projects.50... 

A large number of structures subjected to the seismic loading have been damaged or have experienced failure in different parts such as the pile structure or even in the entire structure due to unanticipated effects of the soil-pile-structure interaction.The complexity of problems regarding the soil-pile-structure interaction is an influencing factor in prediction of the behavior of structure during the earthquakes. In this study, the effect of the interaction on the dynamic response of bridges was investigated using the finite element software ABAQUS. The primary purpose of this study, as previously described, is to study the effects of the soil-structure interaction on a bridge located on a... 

In this project design of adaptive neural network controller for uncertain nonlinear systems in the presence of different restrictions has been investigated. After providing introduction and motivation, two general forms of nonlinear systems including strict- feedback and pure- feedback have been introduced. In order to solve the problem caused by each restriction, a solution has been proposed. For the strict- feedback nonlinear systems several restrictions are considered such as, unknown dynamic model, unmeasured state, input saturation, unknown control directions, time delays in states and input. Stability analysis based on the Lyapunov theorem has been established. In addition, two kinds... 

After being introduced in 2009, the first fully homomorphic encryption (FHE) scheme has created significant excitement in academia and industry. Despite rapid advances in the last 6 years, FHE schemes are still not ready for deployment due to an efficiency bottleneck. Here we introduce a hardware/software codesign, in fact a hardware accelerator optimized for a class of reconfigurable logic to bring homomorphic encryption schemes one step closer to deployment in real-life applications. The accelerator we present is connected via a fast PCIe interface to a CPU platform to provide homomorphic evaluation services to any application that needs to support blinde computations. Specifically we... 

Nowadays, due to the indensible role of electrical energy in life of societies, the reliability of service should be provided in an economic form. Researches has shown that, about 80% of faults occur in the distribution network. In a distribution network that is equipped with automation systems, through the acceleration in the determination of the fault location, and also possibility of reacting against transient and steady faults, the electricity interruption time duration is minimized. This thesis aims to determine the number and to locate the auto reclosers and fault indicators in a distribution network optimally. To make it economically feasible, a limited number of these devices and... 

Train-induced vibrations can disturb the residential areas close to the rail as well as making ground-borne noises that can create problems for sensitive apparatus and devices. To reduce these problems, there need to be an evaluation of the amplitude of the ground-borne vibrations. The goal in this study is creating a suitable finite difference model in order to predict the intensity of train induced vibrations propagating inside or on the surface of the soil using FLAC (Fast Lagrangian Analysis of Continua) software as well as assessing the effectiveness of recycled shredded tires in reducing the surface vibrations by using these material as the filler for vibration isolation trenches. The... 

Massive-MIMO and C-RAN are the two technologies which will be among most important parts of fifth generation (5G) stsrems. They will find widespread uses in future years. However, data transfer rate between these two technologies is a challenging problem. Also channel estimation is crucial in massive-MIMO systems. In this research, the problem of estimating the channel and the problems with the data transfer rate between these two technologies are investigated. We propose using 1-bit quantizers to solve the rate problem and also an algorithm with perfect performance in aspect of error rate is proposed. The mentioned algorithm is implemented on GPUs, which are available at C-RANs and resulted...