Sharif Digital Repository

Potential applications of the molecularly imprinted polymers (MIPs) demand physical configurations in different size ranges. Nowadays, research on MIPs is focused on the development of new or improved morphologies, which involves control and modification of the different parameters during the synthesis. In this study, the effect of different synthesis conditions on the particle size and morphology is investigated. Carbamazepine-imprinted polymers were prepared using precipitation polymerization under various conditions such as: the amounts of cross-linker and functional monomers, initiator, porogen, temperature and time of polymerization. We studied the polymerization conditions to obtain... 

New biocompatible and water soluble hybrid materials containing multi-wall carbon nanotubes (MWCNTs) as core and hyperbranched polyglycerol (PG) as shell were synthesized successfully. In this work, pristine MWCNTs were opened and functionalized through treatment with acid and polyglycerol was covalently grafted onto their surface by the "grafting from" approach based on in-situ ring-opening polymerization of glycidol. Some short-term In vitro cytotoxicity and hemocompatibility tests were conducted on HT1080 cell line (human Fibrosarcoma), because this epithelial cell line can be one of the first route of entry of the exogenous materials to the vascular system and therefore subsequent... 

The aim of this work was to synthesize molecularly imprinted polymer-poly ethylene glycol-folic acid (MIP-PEG-FA) nanoparticles for use as a controlled release carrier for targeting delivery of paclitaxel (PTX) to cancer cells. MIP nanoparticles were synthesized by a mini-emulsion polymerization technique and then PEG-FA was conjugated to the surface of nanoparticles. Nanoparticles showed high drug loading and encapsulation efficiency, 15.6 ± 0.8 and 100%, respectively. The imprinting efficiency of MIPs was evaluated by binding experiments in human serum. Good selective binding and recognition were found in MIP nanoparticles. In vitro drug release studies showed that MIP-PEG-FA have a... 

Introduction: MicroRNA-101 (miR-101) is an intense cancer suppressor with special algorithm to target a wide range of pathways and genes which indicates the ability to regulate apoptosis, cellular stress, metastasis, autophagy, and tumor growth. Silencing of some genes such as Stathmin1 with miR-101 can be interpreted as apoptotic accelerator and autophagy suppressor. It is hypothesized that hybrid microRNA (miRNA) delivery structures based on cationized graphene oxide (GO) could take superiority of targeting and photothermal therapy to suppress the cancer cells  

Free polymer graphene aerogel nanoparticles (GA NPs) were synthesized by using reduction/aggregation of graphene oxide (GO) sheets in the presence of vitamin C (as a biocompatible reductant agent) at a low temperature (40 °C), followed by an effective sonication. Synthesis of GA NPs in doxorubicin hydrochloride (DOX)-containing solution results in the simultaneous synthesis and drug loading with higher performance (than that of the separately synthesized and loaded samples). To investigate the mechanism of loading and the capability of GA NPs in the loading of other drug structures, two groups of ionized (DOX, Amikacin sulfate and, D-glucosamine hydrochloride) and non-ionized (Paclitaxel... 

Hypothesis: It is now being increasingly accepted that cells in their native tissue show different morphologies than those grown on a culture plate. Culturing cells on the conventional two-dimensional (2D) culture plates does not closely resemble the in vivo three-dimensional (3D) structure of cells which in turn seems to affect cellular function. This is one of the reasons, among many others, that nanoparticles uptake and toxicology data from 2D culture plates and in vivo environments are not correlated with one another. In this study, we offer a novel platform technology for producing more in vivo-like models of in vitro cell culture. Experiments: The normal fibroblast cells (HU02) were... 

Recent insights into the nanomedicine have revealed that nanoplatforms enhance the efficacy of carrier in therapeutic applications. Here, multifunctional nanoplatforms were utilized in miRNA-101 delivery and NIR thermal therapy to induce apoptosis in breast cancer cells. Au nanorods (NRs) or nanospheres (NSs) covered with graphene oxide (GO) were prepared and functionalized with polyethylene glycol as a stabilizer and poly-L-arginine (P-L-Arg) as a targeting agent. In nanoplatforms, coupling Au@GO prepared stable structures with higher NIR reactivity. P-L-Arg substantially enhanced the cellular uptake and gene retardation of stuffs coated by them. However, rod-shape nanoplatforms indicated... 

Cervical cancer is the second-most-common cause of malignancies in women worldwide, and the oncogenic activity of the human papilloma virus types (HPV) E7 protein has a crucial role in anogenital tumors. In this study, we have designed a therapeutic vaccine based on chitosan nanodelivery systems to deliver HPV-16 E7 DNA vaccine, considered as a tumor specific antigen for immunotherapy of HPV-associated cervical cancer. We have developed a Nano-chitosan (NCS) as a carrier system for intramuscular administration using a recombinant DNA vaccine expressing HPV-16 E7 (NCS-DNA E7 vaccine). NCS were characterized in vitro for their gene transfection ability. Results: The transfection of CS-pEGFP... 

Adjusting control factors (independent variables) to achieve an optimal level of output (response variable) is usually required in many real-world manufacturing problems. Common optimization methods often begin with estimating the relationship between a response and independent variables. Among these techniques, response surface methodology (RSM), due to its simplicity, has recently attracted extensive attention. However, on the one hand, in some cases, the relationship between a response and independent variables is too complex to be estimated using polynomial regression models. On the other hand, solving the obtained optimization model is not easy by exact methods. This paper introduces a... 

In this paper we introduce two methods for measuring irregularities in human heartbeat time series (HHTS). First we consider the multi-fractal structure of HHTS to distinguish healthy individuals and from those with congestive heart failure. In this way we modify the Extended Self-Similarity (ESS) method and apply it to HHTS. Our second approach is based on the recursive method, which we use to predict the duration of the next heartbeat by considering a few previous ones. We use standard physiological data and show that these approaches lead to very satisfactory methods to resolve the healthy and CHF individuals. These methods can be used potentially in portable electronic heart alarm... 

Nanoparticles (NPs) are increasingly being used in different branches of science and in industrial applications; however, their rapid detection and characterization at low concentration levels have remained a challenge; more specifically, there is no single technique that can characterize the physicochemical properties of NPs (e.g. composition and size). In this work we have developed a colorimetric sensor array for defining the physicochemical properties of NPs in aqueous solution with ultra-low concentrations (e.g. 10-7g ml-1 for gold NPs). Various NPs were readily identified using a standard chemometric approach (i.e. hierarchical clustering analysis), with no misclassifications over 400... 

Protein fibrillation process (e.g., from amyloid beta (Aβ) and α-synuclein) is the main cause of several catastrophic neurodegenerative diseases such as Alzheimer's and Parkinson diseases. During the past few decades, nanoparticles (NPs) were recognized as one of the most promising tools for inhibiting the progress of the disease by controlling the fibrillation kinetic process; for instance, gold NPs have a strong capability to inhibit Aβ fibrillations. It is now well understood that a layer of biomolecules would cover the surface of NPs (so called "protein corona") upon the interaction of NPs with protein sources. Due to the fact that the biological species (e.g., cells and amyloidal... 

Mitochondria is a major regulator of inducing tumor apoptosis and it is as a prime target for chemotherapy. Anticancers need to access specific tumor cells and also pass through different barriers such as outer and inner membranes of mitochondria. Targeted accumulation of paclitaxel (PTX) within the mitochondria was achieved by direct conjugation of PTX with triphenylphosphonium (TPP) as a mitochondrial membrane-permeable cation. PTX-TPP prodrug was synthesized by pH-sensitive ester bond between the hydroxyl function of PTX and the carboxylic function of TPP. This ester bond is only cleaved by the mitochondrial aldehyde dehydrogenase. Prodrug was loaded in the albumin nanoparticles by... 

Chitosan-coated human serum albumin nanoparticles were functionalized by MUC1 aptamer to obtain a selective drug carrier toward cancers overexpressing MUC1. The negative charges of albumin nanoparticles were shifted to positive charges by surface modification with chitosan, and MUC1 was conjugated through an acrylate spacer. The cytotoxicity of targeted nanoparticles was significantly more than non-aptamer nanoparticles, and also the chitosan-coated nanoparticles had more cytotoxic effects than the negatively charged albumin nanoparticles. The IC50 of targeted nanoparticles was 28 and 26% of free paclitaxel in MCF7 and T47D cells at 48 h, respectively. Confocal laser scanning electron... 

Background: This research follows some investigations through neural tissue engineering, including fabrication, surface treatment, and evaluation of novel self-stimuli conductive biocompatible and degradable nanocomposite scaffolds. Methods: Gelatin as a biobased material and polyvinylidene fluoride (PVDF) as a mechanical, electrical, and piezoelectric improvement agent were co-electrospun. In addition, polyaniline/graphene (PAG) nanoparticles were synthesized and added to gelatin solutions in different percentages to induce electrical conductivity. After obtaining optimum PAG percentage, cold atmospheric plasma (CAP) treatment was applied over the best samples by different plasma variable... 

It is well understood that patients with different diseases may have a variety of specific proteins (e.g., type, amount, and configuration) in their plasmas. When nanoparticles (NPs) are exposed to these plasmas, the resulting coronas may incorporate some of the disease-specific proteins. Using gold (Au) NPs with different surface properties and corona composition, we have developed a technology for the discrimination and detection of two neurodegenerative diseases, Alzheimer's disease (AD) and multiple sclerosis (MS). Applying a variety of techniques, including UV-visible spectra, colorimetric response analyses and liquid chromatography-tandem mass spectrometry, we found the corona-NP... 

Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and...