Sharif Digital Repository

The construction of a facies model could be employed as a conditional data for any property simulation that results in a more reliable reservoir characterization in further steps. In this study, an Iranian gas reservoir with six wells was studied to determine the 3D reservoir facies model. Fifteen reservoir facies were first detected along one of the wells with detailed core and thin section descriptions. Due to the significant difference between the core and log data resolution, facies were clustered into four major groups regarding the digenetic processes and petrophysical lithofacies properties (permeability and porosity). The lithofacies specification effect on petrophysical properties... 

Enhanced oil recovery (EOR) methods assisted by gravity drainage mechanism and application of sophisticated horizontal wells bring new hope for heavy oil extraction. Variety of thermal and non-thermal EOR techniques inject an external source of energy and materials such as steam, solvent vapor, or gas through a horizontal well at the top of the reservoir to reduce in-situ heavy oil viscosity. So, the diluted oil becomes mobile and flows downwards by gravity drainage to a horizontal producer located at the bottom of the reservoir. In this paper, a sector model of an Iranian fractured carbonate heavy oil reservoir was provided to simulate and evaluate capability of some EOR techniques such as... 

In this work, a series of solvent- and water-injection scenarios were conducted on horizontal five-spot glass micromodels that were saturated initially with heavy oil. Sandstone and limestone rock look-alike and network patterns with different pore structures were used in the experiments. The results show that the ultimate oil recovery of a water-alternating-solvent (WAS) scheme was greater than that of a simultaneously water-alternating-solvent (SWAS) scheme, and the efficiency of a solvent-soak scheme also offers a greater recovery. Likewise, the WAS scheme resulted in greater oil recovery when compared with continuous solvent injection (CSI), with the same amount of solvent consumption.... 

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not...