Sharif Digital Repository

Fluid flow modeling in porous media has many applications in waste treatment, hydrology and petroleum engineering. In any geological model, flow behavior is controlled by multiple properties. These properties must be known in advance of common flow simulations. When uncertainties are present, deterministic modeling often produces poor results. Percolation and Random Walk (RW) methods have recently been used in flow modeling. Their stochastic basis is useful in dealing with uncertainty problems. They are also useful in finding the relationship between porous media descriptions and flow behavior. This paper employs a simple methodology based on random walk and percolation techniques. The... 

Recent advancements in photovoltaic (PV) system technologies have decreased their investment cost and enabled the construction of large PV farms for bulk power generations. The output power of PV farms is affected by both failure of composed components and solar radiation variability. These two factors cause the output power of PV farms be random and different from that of conventional units. Therefore, suitable models and methods should be developed to assess different aspects of PV farms integration into power systems, particularly from the system reliability viewpoint. In this context a reliability model has been developed for PV farms with considering both the uncertainties associated... 

In this article, a genetic algorithm is used to optimize the separator pressures in a multistage crude oil and multistage gas condensate production unit with four and three separators respectively. This leads to the generation of more accurate results for the quality and quantity of oil remaining in the stock tank for both crude oil and gas condensate production units. Genetic-based optimized pressures for crude oil separators resulted in 1.8% and 2% enhancement in oil remaining in the stock tank for summer and winter respectively. API gravity of the stock tank oil was improved 2.4% in summer and 2.2% in winter. For the gas condensate production unit, optimized pressures can enhance by 8.6%... 

In this paper some advantage of online monitoring in power transformer and the sensors that can be used for partial discharge detection are described. Several detected PD in one power transformer and one distribution transformer are depicted. Matlabs wavelet package is employed to de-noise the recorded signals. As it appear from the captured and the denoised signals, PD signals in an aged power transformer are often enough large that can be easily detected through the noisy measured signals. By examination of the frequency spectrum of several PD signal in this paper it is obvious that this signal contain two major frequency band, one under 1 MHz and the other one between 7 to 9 MHz. © 2008... 

With the current focus on energy and environment, efficient integration of renewable energies, especially wind energy into power systems, is becoming essential. Furthermore, to fully capture wind potentials and to recognize the unique characteristics associated with wind energy in power systems adequacy analysis, a profound inquiry is required. In this way, this paper tries to establish a comprehensive analytical approach for reliability modeling of doubly-fed induction generator (DFIG)-based wind farms. First, the most impressive components of wind turbines are introduced. It then continues with integrating developed state space model of wind turbines and their production uncertainties,... 

The discrete fracture network (DFN) and Multiple-Continua concept are among the most widely used methods to model naturally fractured reservoirs. Each faces specific limitations. The recently introduced recovery curve method (RCM) is believed to be a compromise between these two current methods. In this method the recovery curves are used to determine the amount of mass exchanges between the matrix and fracture mediums. Two recovery curves are assigned for each simulation cell, one curve for gas displacement in the presence of the gravity drainage mechanism, and another for water displacement in the case of the occurrence of the imbibition mechanism. These curves describe matrix-fracture... 

With the current focus on energy and environment, efficient integration of renewable energies, especially wind energy into power systems, is becoming essential. Furthermore, to fully capture wind potentials and to recognize the unique characteristics associated with wind energy in power systems adequacy analysis, a profound inquiry is required. In this way, this paper tries to establish a comprehensive analytical approach for reliability modeling of doubly-fed induction generator (DFIG)-based wind farms. First, the most impressive components of wind turbines are introduced. It then continues with integrating developed state space model of wind turbines and their production uncertainties,... 

The discrete fracture network (DFN) and Multiple-Continua concept are among the most widely used methods to model naturally fractured reservoirs. Each faces specific limitations. The recently introduced recovery curve method (RCM) is believed to be a compromise between these two current methods. In this method the recovery curves are used to determine the amount of mass exchanges between the matrix and fracture mediums. Two recovery curves are assigned for each simulation cell, one curve for gas displacement in the presence of the gravity drainage mechanism, and another for water displacement in the case of the occurrence of the imbibition mechanism. These curves describe matrix-fracture... 

The Discrete Fracture Network and Dual Continuum concept are two common methods to model naturally fractured reservoirs. Each has specific limitations. The newly introduced recovery curve method is believed to be a compromise between these two current methods. In the recovery curve method, two recovery curves for water and gas displacements are used to more realistically calculate matrix-fracture mass exchanges. This paper presents a new approach to determine appropriate recovery curves by using the recovery curve method and production data. In particular, two recovery curves were determined for a column model by matching phase contact positions throughout the production data. Hybrid genetic... 

Variability and uncertainty of wind and photovoltaic (PV) generations greatly influence technical and financial aspects of power systems. This paper examines the potential impacts of large-scale wind and PV farms on reliability level of composite generation and transmission systems. At first, reliability models of renewable-based units are developed. In these models, both component failure rates and uncertainty nature of renewable resources are taken into account. Using the proposed technique, the multi-state analytical models of a wind farm placed in Manjil and a PV farm placed in Jask both in Iran are extracted. Then, reliability studies of high renewable-energies penetrated power system... 

Variability and uncertainty of wind and photovoltaic (PV) generations greatly influence technical and financial aspects of power systems. This paper examines the potential impacts of large-scale wind and PV farms on reliability level of composite generation and transmission systems. At first, reliability models of renewable-based units are developed. In these models, both component failure rates and uncertainty nature of renewable resources are taken into account. Using the proposed technique, the multi-state analytical models of a wind farm placed in Manjil and a PV farm placed in Jask both in Iran are extracted. Then, reliability studies of high renewable-energies penetrated power system... 

Deployment of renewable energies for the electricity generation is on the rise around the world, among which is the run-of-the-river (ROR) power plant whose output power is variable throughout the year depending on the water flow of the respective river. The inherent uncertainty associated with renewable energy resources calls for new stochastic modeling approaches to measure the impacts of using these energies on the power system performance. This paper develops an analytical reliability model for ROR power plants. The model is based on the state-space analysis and is devised with the intention of being used in adequacy studies of power systems. Failure of related components and the... 

Image logs provide useful information for fracture study in naturally fractured reservoir. Fracture dip, azimuth, aperture and fracture density can be obtained from image logs and have great importance in naturally fractured reservoir characterization. Imaging all fractured parts of hydrocarbon reservoirs and interpreting the results is expensive and time consuming. In this study, an improved method to make a quantitative correlation between fracture densities obtained from image logs and conventional well log data by integration of different artificial intelligence systems was proposed. The proposed method combines the results of Adaptive Neuro-Fuzzy Inference System (ANFIS) and Neural... 

This paper proposes a new approach to watermarking multimedia products based on the combination of redundant discrete wavelet transform and independent component analysis. The original image is decomposed by RDWT, and watermark is embedded in to LL sub-band frequency according mixing model of the ICA, after that for enhancing the robustness of the watermark, the perceptual model is applied via stochastic approach for watermark adapting. This is based on computation of a noise visibility function (NVF) which has local image properties so the strength of watermarking is controllable. Principal component analysis (PCA) whitening process and FastICA techniques are introduced to ensure a blind... 

When the reservoir energy is too low for the well to flow, or the production rate desired is greater than the reservoir energy can deliver, using some kind of artificial lift method to provide the energy to bring the fluid to the surface, seems to be necessary. Continuous flow gas lift is one of the most common artificial lift methods widely used in the oil industry during which, at appropriate pressure, gas is injected in a suitable depth into the tubing to gasify the oil column, and thus assist the production. Each well has an optimal point at which it will produce the most oil. In ideal conditions, at which there is no limitation in the total amount of available gas, a sufficient amount... 

A hybrid genetic algorithm (HGA) was introduced to allocate optimum amount of gas. This method was applied to a group of wells in gas lift in the case of availability limited amount of gas. For testing the ability of the proposed HGA, the results of this work with those of previous works in a field with six wells were compared. Then for an Iranian southern west oil field with nine wells, gas allocation is performed using different amount of available gas. The results show that the introduced method (HGA) is very efficient tool in gas allocation issue