Sharif Digital Repository

An efficient, highly chemoselective and simple synthesis of secondary amines via reductive amination of aldehydes, aromatic amines and inexpensive and easily accessible Diethyl 2,6-dimethyl-1,4-dihydro-3,5-pyridinedicarboxylate (DHP) in the presence of catalytic amounts of p-toluenesulfonic acid (PTSA) in water in good to excellent yields is reported  

A simple, rapid, and highly efficient method for the preparation of symmetrical aliphatic, aromatic, and heteroaromatic disulfides is reported. Addition of NBS to an alkyl- or arylthiol under catalyst-free conditions in dichloromethane solution produces the corresponding disulfides in nearly quantitative yields  

At room temperature, alcohols and phenols are efficiently protected with hexamethyldisilazane (HMDS) in the presence of silica sulfuric acid in good to excellent yields. The catalyst can be recycled for subsequent reactions without any appreciable loss of efficiency. Copyright © Taylor and Francis Group, LLC  

Hydrogen peroxide readily oxidizes Hantzsch type 1,4-dihydropyridines in the presence of cobalt(II) acetate as catalyst at room temperature. No evidence of a dealkylation process for 4-alkyl 1,4-dihydropyridines has been observed  

The efficient and very simple conjugate addition of aromatic and aliphatic amines to α,β-unsaturated carbonyl compounds under solvent-free conditions in the presence of catalytic amount of silicon tetrachloride is reported. The reaction of aryl and alkyl amines with different Michael acceptors gave the corresponding Michael adducts with simple catalyst and good to excellent yields  

The desire to decrease electrical loading by using energy efficient lighting has resulted in a high level of attention to replacing conventional incandescent lamps with compact fluorescent lamps (CFL). In Iran from energy management point of view, people are encouraged by ministry of power to use CFLs. Also after elimination of subsidies, the substantial increase in electric energy price resulted in a high level of penetration of CFLs in electricity grid. CFL is a nonlinear load, therefore it injects harmonic to the network. In past, due to lower application of CFL, these harmonics were ignored, however today by the widespread application of CFLs; these small sources are combined and have... 

An operationally simple, practical, and economical protocol for iron(III) chloride catalyzed Paal-Knorr pyrrole synthesis in water in good to excellent yields has been developed. Several N-substituted pyrroles are readily prepared from the reaction of 2,5-dimethoxytetrahydrofuran and aryl/alkyl, sulfonyl and acyl amines under very mild reaction conditions. © Georg Thieme Verlag Stuttgart  

Hereby, a sonochemical method for synthesis of pure magnetic Fe3O4Onanoparticles (Fe3O4-NPs) in large scale is being introduced. Synthesis proceeds via simple approach, at room temperature, under sonication, using cheap reagents, green antioxidant-reductant reagent and without using inert gas purge as protective atmosphere condition. During this procedure, hydrogen gas releases continuously as valuable byproduct at the anaerobic step of reaction. Characterizations' results indicate that the final product is pure spherical Fe3O4-NPs, with narrow size distribution and about less than 32nm in mean diameter while more than 99% of particles size were less than 40nm. According to Vibrational... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields