Sharif Digital Repository

Polychlorinated biphenyls (PCBs) cause many significant ecological problems because of their low degradability, high harmfulness, and solid bioaccumulation.Two bacterial strains were isolated from soil that had been polluted with electrical transformer liquid for more than 40 years. The isolates were distinguished as Lysinibacillus macrolides DSM54Tand Bacillus firmus NBRC15306Tthrough 16S rRNA sequencing analysis.This is the primary report of an agent of the genus Bacillus firmus equipped for the removal of PCBs. The strains could develop broadly on 2-Chlorobiphenyl and 2,4-dichlorobiphenyl. GC/MS analysis of individual congeners revealed up to 80% degradation of the xenobiotics in 96h,... 

Petroleum products which are used in a wide variety of industries as energy sources and raw materials have become a major concern in pollution of terrestrial and marine environments. The purpose of this study was to assess the potential of indigenous microbial isolates for degradation of diesel fuel. Two most proficient bacterial strains among five isolated strains from polluted soil of an industrial refinery were studied. The isolates then were identified as Pseudomonas aeruginosa and Bacillus subtilis using biochemical tests and 16S rRNA gene sequence analyses. P. aeruginosa showed higher biodegradation efficiency than B. subtilis in shaking flask containing diesel-contaminated water. P.... 

In this work, an attempt was made to improve the distribution of CNTs in CNT/alumina nanocomposites. The composite powders containing 1 and 3vol% of CNTs were produced and calcined at 500°C for 2h. Surface coating with boehmite nanoparticles was used to improve CNT distribution in alumina matrix. Calcined powders were shaped into compacted samples by cold isostatic pressing at 180MPa and sintered at 1600°C for 2h in flowing gas atmosphere (95%Ar+5%H2). Phase analysis of the calcined composite powders showed complete transformation of boehmite into gamma-alumina. The maximum flexural strength was 465±31MPa corresponding to addition of 1vol% CNTs. Evaluating the fracture toughness via DCM... 

Alumina-MWCNT composite was densified by microwave sintering. CNTs were coated with boehmite nanoparticles to enhance their distribution in composite samples. Calcination temperature of composite powder was determined by TGA analysis (5 °C/min). Samples containing 0 and 1vol%CNT were produced by cold isostatic pressing at 180 MPa. Microwave sintering (1520 °C for 45 min) was conducted under the flow of argon. Phase analysis of the calcined composite powder showed complete transformation of boehmite into gamma-alumina. The relative densities were 99.3% and 98.1% for monolithic alumina and composite, respectively. CNT addition improved the fracture toughness of alumina by ~37%. SEM images... 

Chlorobenzoic acids (CBAs) are recalcitrant and toxic materials which enter the environment directly using pesticides and herbicides, or indirectly through the biodegradation of polychlorinated biphenyl (PCB) compounds. In the conducted study, biodegradation of 4-chlrobenzoic acid was investigated by Lysinibacillus macrolides DSM54T, which had previously been isolated from PCB-polluted soils. Environmental factors including pH, temperature, 4-CBA concentration and inoculation percentage were optimized using response surface methodology (RSM). 58 experiments were designed according to Historical Data, because of the arbitrary selection of experiments, and the combined effects of the... 

We propose a scheme for the observation of micro-macro entanglement in photon number based on amplifying and deamplifying a single-photon entangled state in combination with homodyne quantum state tomography. The created micro-macro entangled state, which exists between the amplification and deamplification steps, is a superposition of two components with mean photon numbers that differ by approximately a factor of three. We show that for reasonable values of photon loss it should be possible to detect micro-macro photon-number entanglement where the macrosystem has a mean number of one hundred photons or more  

Micro flora of the effluents from a dairy factory in Tehran(Pegah Dairy Processing Plant) were isolated and screened for their ability to reduce the organic matter content and COD of the effluents. 10 bacteria were selected due to reduction in COD content from the 4th to 6th day of incubation at 30 °C and pH =11. Highest COD reduction were obtained by two isolates, BP3 and BP4, 70.7 % and 69.5 %, respectively (The initial COD concentration was 3000 mg/l and reduced to 880 and 920 mg/l).After optimization of the condition for test organisms, big reductions in COD, carbohydrate, fat and protein content of the effluents were observed by BP3 up to 84.70 %, 98 %, 45.30 % and 53 %, respectively... 

One of the challenges of building complex and functional tissues and organs in tissue engineering is transporting nutrients and oxygen to the tissue. The use of oxygen-releasing materials is one solution to overcome this challenge. In this study, alginate (Alg) 4% (w/v) was used as the main material for the scaffold, and calcium peroxide (CPO) was used to release oxygen. CPO can react with water and finally release oxygen, which leads to the elimination of hypoxia and effective distribution of oxygen in the scaffold. Multiple tests, including the oxygen release profile, degradability, swelling, porosity, and SEM images, performed on the bulk of the material showed that increasing the... 

In this study, we have investigated the potential of a native bacterial strain isolated from an Iranian oil field for the production of biosurfactant. The bacterium was identified to be Bacillus mycoides by biochemical tests and 16S ribotyping. The biosurfactant, which was produced by this bacterium, was able to reduce the surface tension of media to 34. mN/m. Compositional analysis of the produced biosurfactant has been carried out by thin layer chromatography (TLC) and FT-IR. The biosurfactant produced by the isolate was characterized as lipopeptide derivative. Biosurfactant production was optimized by the combination of central composite design (CCD) and response surface methodology... 

We study the simplest optomechanical system with a focus on the bistable regime. The covariance matrix formalism allows us to study both cooling and entanglement in a unified framework. We identify two key factors governing entanglement; namely, the bistability parameter (i.e., the distance from the end of a stable branch in the bistable regime) and the effective detuning, and we describe the optimum regime where entanglement is greatest. We also show that, in general, entanglement is a nonmonotonic function of optomechanical coupling. This is especially important in understanding the optomechanical entanglement of the second stable branch  

We study the simplest optomechanical system in the presence of laser phase noise (LPN) using the covariance matrix formalism. We show that for any LPN model with a finite correlation time, the destructive effect of the phase noise is especially strong in the bistable regime. This explains why ground-state cooling is still possible in the presence of phase noise, as it happens far away from the bistable regime. We also show that the optomechanical entanglement is strongly affected by phase noise  

In regard to highly poisonous effects of cyanide ion, concerns have been focused recently on treatment of such compounds in different ways. Four bacterial strains (C1-C4) capable of using cyanide as nitrogen source were isolated from contaminated gold mine soil samples under alkaline conditions at 30 °C, pH 9.5-10.5, and agitation speed 150 rpm. The gram-negative bacterium C3 (identified as Pseudomonas parafulva NBRC 16636(T) by 16S rRNA gene sequencing) was able to tolerate cyanide up to 500 ppm besides removing 93.5% of 200 ppm cyanide in 13 days which was confirmed by microorganisms growth. The addition of basal salts enhanced the removal efficiency of C3 by 16%. Cyanide removal... 

The solubility of sulfur dioxide (SO2) and carbon dioxide (CO2) at P = 1 bar in a series of imidazolium-based room-temperature ionic liquids (RTILs) is calculated by Monte Carlo simulation in NPT ensemble using the OPLS-UA force field and Widom particle insertion method. The studied ILs were 1-butyl-3-methylimidazolium ([bmim]+) tetrafluoroborate ([BF4]-), [bmim]+ hexafluorophosphate ([PF 6]-), [bmim]+ bromide ([Br]-), [bmim]+ nitrate ([NO3]-), [bmim]+ bis-(trifluoromethyl) sulfonylimide ([Tf2N]-), and 1-ethyl-3-methylimidazolium tetrafluoroborate ([emim][BF4]). To validate the simulations, the liquid density of studied ILs and the solubility of CO2 in [bmim][PF6] was compared with... 

The production of protease by Bacillus licheniformis BBRC 100053 was studied. The most appropriate medium for the growth and protease production is composed of: lactose 1%, yeast extract 0.5%, peptone 0.5%, KH2PO 4 0.1%, MgSO4.7H2O 0.02%. Enzyme production corresponded with growth and reached a maximums level (589 U/ml) during the stationary phase at 35°C, pH equivalent to 10 and with 150 rpm after 73 hours. Protease activity was highest at pH 8 and 45°C. The best carbon sources are respectively lactose and maltose and the best nitrogen source is peptone. The protease was highly active and stable from pH 7.0 to 11.0 with an optimum at pH 7-8.... 

The supernatant obtained from the extracellular laccase produced by Phanerochaete chrysosporium was used as the enzyme source to conduct a partial purification, characterization and dye decolorization study. The partially purified enzyme was stable in the pH range of 3–5 and showed an optimum activity at pH 4.0, using guaiacol as a substrate. Laccase stability of pH was determined and discovered to retain 100% of its activity at a pH of 4.0 after 2 h. The maximum enzyme activity was obtained between 30 and 50 °C. The maximum velocity and Michaelis constant were calculated as 3.171 µM−1·min and 1628.23 µM, respectively. The enzyme was activated by Fe2+, Zn2+, Ca2+ and Cu2+, while Hg2+, Mn2+,... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature 40... 

This study represents the investigation of In2S3 thin films, which have been deposited with different Indium salts (Chloride, Acetate, and Nitrate) using the Chemical Spray Pyrolysis (CSP) method. The Mott-Schottky analysis has been used in case of studying the electrical properties of films such as conduction and valence band, carrier densities, Fermi level (Efn), flat band potential, and semiconductor type. In the next step, the Rb1MAFA perovskite solar cell has been simulated, and the results have been validated by the experimental data (with the least parameters for fitting). Finally, In2S3 layers have been inserted on the SnO2 layer to decrease the recombination rate and enhance the...