Sharif Digital Repository

Zinc-bromine redox flow batteries are promising for large-scale energy storage applications due to their high energy density and open-circuit voltage. Proposed models for predicting these batteries' performance are limited due to challenges such as zinc deposition during the charging step and the utilization of a complexing agent. In this study, a 2D dynamic model was developed to investigate the battery performance. The kinetic equations for half-reactions are considered according to their two-step electron transfer mechanism. The model predictions were validated against experimental data reported in the literature for different current densities. Afterward, effects of various operating... 

In this study, with respect to previous projects, we focused on size reduction of hollow and endohedral fullerenes research reactors. For this reason, we set up two reactors having 1/2 and 3 liters volumes and then such parameters as pressure, reactor temperature, arc duration time, arc time interval and the working electrical current through the electrodes circuit, in both reactors were optimized. The reactors, 3- and 1/2-liter reactors were of types of horizontal and vertical, respectively. In this project spatial angle between two electrodes were also found as effective variable on fullerenes yield in the 3-liters arc reactor for the first time. We found that upon correction of the... 

The goal of the present study is to analyze the effect of CaF2 and nano-TiO2 as additives on formulation and properties of common dental glass-ceramics. To achieve the goal, a glass system based on SiO2-Al2O3-Li2O-K2O-P2O5-ZnO-ZrO2 was considered to produce glass-ceramic samples and the additives, nano-TiO2 and CaF2, with the 0.5, 1, and 1.5 %Wt was added to the system. After the melting process, the glass samples poured in the water and ferrite was produced. In the next step, the ferrite was milled and pressed. In the heat treatment step, the samples were treated in the temperature range of 650-850°C in order to gain lithium disilicate glass-ceramics. In the last step, the chemical... 

Nowadays, with increasing concerns about health of food and its influence on human health,food authenticity has become a vital issue and a major challenge for consumers and regulatory agencies. It's especially remarkable about food with high nutritional and economical value. On the other hand, solving these challenges necessitates the use of fast and reliable techniques.Among the various foods, saffron is the main candidate for food adulteration due to its low production and high economic value and from this viewpoint it's in fourth place. Since the scope of fraud in this food is vast and also Iran is the major producer of saffron in the world,the present project has highlighted the... 

In this project, in continuation of a PhD resreach undertaken in this research group in 2017, the synthesis and study of two new tweezer and linker molecule bearing azobenzene moiety were carried out, characterized by applying IR spectroscopy, ¹H and ¹³C {¹H} NMR, fluorescence spectroscopy, UV-visible spectroscopy, elemental analysis and X-ray crystallography. Firstly, interaction of T2 with meso-tetraphenylporphyrinato zinc(II) and aluminium tetraphenylporphyrinato were studied using the fluorescence spectroscopy. The formation constant of T2 in cis and trans isomer with ZnTPP was measured as 5.1(±0.4) ×108 and 2.0×108(±1074) dm6mol-2, respectively. The formation constant of T2 in with... 

Magnesium has recently been considered as a biocompatible metal with mechanical properties close to bone for use in biological applications. On the other hand, the degradation properties of this metal in the physiological environment have made this metal superior to permanent biomaterials such as stainless steel, titanium alloys. The most important challenge of using this alkaline earth metal in the body environment is its rapid corrosion, which causes problems such as alkaline toxicity and loss of supporting role before complete tissue repair. In this study, Mg-Zn-Ag-Cu alloys were manufactured to improve mechanical strength, corrosion resistance and antibacterial properties. Finally, after... 

The goal of this project was study on coordination behavior of the 14-membered macrocyclic ligand of type N2O2 aza-crown while it is attached to fullerene C60 nano-particle. For this purpose, firstly the macrocyclic ligand (Fig 3-1, L1) was synthesized and then was reacted with C60 (Fig 3-1, L2) of which the product was characterized by elemental analysis. Since the product was insoluble in any solvents, further study on its coordination chemistry was impossible. In a second procedure, the macrocyclic ligand was reacted with benzylbromide. The reaction mixture gave two macrocyclic ligands with different number of benzylic pendant groups (Fig 3-1, L3-L4). The products were separated by column... 

The purpose of this project is to synthesis of O2N3-azacrown ligands with 17 to 21 membered ring and investigation of their interaction with C60 according to increase ring size. These macrocyclic ligands can be used in C60 purification. In this project, change in macrocyclic cavity for finding the best macrocycle with appropriate cavity to C60 size has been considered. Firstly, five O2N3-azacrown ligands were synthesized and characterized by NMR spectroscopy and elemental analysis. Interaction of these ligands were considered by electronic spectroscopy applying Benesi-Hildebrand equation. According to the results, it was found that the best macrocycle for formation of stable complex with... 

Fullerenes are molecular solid materials which are composed of 3D closed shell carbon-only structure. As soon as mass production of fullerenes was performed, the synthesis and characterization of endohedral fullerenes having at least one non-carbon element in the hollow fullerene cage, was started (in which about 30 atoms inserted in it so far). Furthermore, because of low efficiency and purity of these nano-particles, nowadays characterization of fullerenes is one of the most important research fields. In this project, we firstly optimized the fullerene production parameters in an arc discharge reactor to reach convenient efficiency. Then, the synthesis of endohedral fullerene by vaporizing... 

In this project, M2 macrocyclic ligand, bearing three pyridine side arms (3p) was synthesized and characterized by employing elemental analysis and 1H NMR, 13C NMR and IR methods. The interaction of 3p with zinc tetraphenylporphyrin was investigated, using fluorescence and UV-vis spectroscopy in solution phase. The observed quenching in the fluorescence spectrum alongside Q band shift in UV-vis spectrum indicate on the interaction of 3p with ZnTPP. The formation constant for these interactions in 1:1 ratio was calculated 10100 M-1, employing fluorescence method. The formation constant was calculated 630 M-1 for 1:2 ratio for 3p:ZnTPP. Having 1:2 ratio 3pZnTPP was also synthesized and... 

In the present study, the coordination chemistry of an O4N4-tetrabenza-crown ether macrocyclic ligand L1 with M2+ (M= Cu, Cd, Hg, and Pb) was investigated by employing UV-visible, 1H-NMR spectroscopy in their solutions. According to the association constants calculated by 1H-NMR titrations, the complex formation stability for these closed shell cations was found in a series of Pb > Hg > Cd, leading to the larger cation, the better accommodation with L1. Moreover, the supramolecular interaction of L1 with fullerene C60 was also assessed by UV-visible spectroscopy. Meanwhile, the structure of [Cd(1)]2+ complex was determine by X-ray crystallographic method in their solid state. A square... 

In this research, four N2O2–azacrown macrocyclic ligands with naphthalene pendant arms (L1-L4) were synthesized using direct synthesis. The products were characterized applying 1H and 13C {1H} NMR spectroscopy, IR and Mass spectrometry. Interaction of these ligands with [60]fullerene and Cu(II) were monitored respectively by fluorescent as well as UV-vis spectroscopy and applying Benesi-Hildebrand equation. These intercations were compared with N2O2 macrocyclic ligands in previous experiments in terms of their calculated association constants (Ka). According to our results, the presence of naphthalene pendant arm groups led to increase the interaction with [60]fullerene compared to the... 

In the present research, a series of bimacrocyclic tweezer anchored through azobenzene moiety were synthesized and characterized by applying IR spectroscopy, 1H and 13C{1H} NMR, fluorescence spectroscopy, UV-visible spectroscopy, mass spectrometry and elemental analysis and in some cases by X-ray crystallography. Firstly, UV-visible spectroscopy established that the irradiation of the tweezers with UV light promoted the trans to cis isomerization. On the other hand, thermal cis-trans isomerization behavior of the azobenzene moiety in tweezers was surveyed in which the cis isomers were formed of the heating at 50 oC for 5 minutes. Where the -OH group was replaced with 4-toluenesulfonyl... 

One of the most common methods of producing fullerenes is electric arc vaporization of graphite. Due to the low yield and purity of the nanoparticles in this method, the synthesis and isolation of the area research is important. In this work, the production was improved in a multi-channel arc reactor in which having horizontal graphite electrodes. The influence of various operational parameters such as pressure of inert gas, spark time, interval time between two sparks, voltage and current were completely optimized. Moreover, the prominent advantage of the new reactor was increasing the number of manufacturing units, at least from one to three, which the production of fullerene was... 

In our previous work in this laboratory, macrocycle containingO_2 N_2 and O_2 N_3- donor set with various ring size were synthesized. The intraction of macrocyles with [60]fullerene were determined. In this research, we synthesized 22-membered aza-crown macrocycle ligand containing O_4 N_2- donor set and characterized by NMRspectroscopy. The intraction of macrocycle with [60]fullerene were also investigated by UV-Visible spectroscopy. The formation constant was determined applying Benesi--Hildebrand equation. The result has been showed that O_4 N_2 macrocyle had better complexation with [60]fullerene in comparision of O_2 N_3 and O_2 N_2 donor sets. Then, the interaction of O_4 N_2 with... 

In this project, a summarization system, which works for narrative text, based on cognitive science has been designed. Its results due to its different approach have been satisfactory. Since summarization has a direct relationship with comprehension of text. This system has been designed based on situational model, a famous theory related to comprehension of text.According to this theory, as human read a text, they extract five features for comprehension of text. The features are temporality, place, causality, protagonists, and intentionality. The make a frame based on these features. Event- Indexing model pays attention to all of these features, so it has been used for the summarization... 

Since the discovery of fullerene C60, its chemical and physical properties have been a hot topic in the field of research. For the past two decades remarkable developments achieved in the field of fullerenes chemistry. The aim of this study is comparative study of antioxidant property of fullerene C60 and its amine derivatives and the effect of transition metal complexes. At the outset the anti-oxidative property of fullerene C60 and its amine derivatives explored and it was found that by increasing the chain length of amines, the anti-oxidative property of aminofullerenes increased respectively. In next step the effect of CoSALEN complex on anti-oxidative property of fullerene was... 

New N4O6 molecular tweezers were synthesized from N2O2 benzo- and naphthodiazacrown macrocycles bearing benzylic dialdehydes as a flexible and semi-flexible spacer in a short time and at room temperature. The products were characterized by IR, 1H and 13C NMR spectroscopy as well as elemental microanalysis. The interactions of some of these tweezers with C60, Cu(II), Co(II), Ni(II), Zn(II), Hg(II) and Mn(II) were investigated by employing UV-Vis and fluorescence spectroscopy. Efficient fluorescence responses for 2NM3BD were observed in the presence of C60, Cu(II), Mn(II), Hg(II) and Zn(II). Meanwhile, the calculation of the association constants (K¬BH) employing Benesi-Hildebrand equation in...