Sharif Digital Repository

It is proved that the out-of-phase autocorrelation of a well-known class of multiplexed sequences for cryptographic and spread spectrum applications is necessarily high for relatively small values of the phase shifts. Related design criteria for the multiplexer generator including the use of full positive difference sets are proposed. By generalizing the classical occupancy problem, higher order statistical weaknesses of multiplexed sequences are also established. © 2002 Elsevier Science (USA)  

Abstract. The linear sequential circuit approximation method for combiners with memory is used to find mutually correlated linear transforms of the input and output sequences in the well-known summation generator with any number of inputs. It is shown that the determined correlation coefficient is large enough for applying a fast correlation attack to the output sequence to reconstruct the initial states of the input linear feedback shift registers. The proposed attack is based on iterative probabilistic decoding and appropriately generated low-weight parity-checks. The required output sequence length and the computational complexity are both derived. Successful experimental results for the... 

The response of infinite beams supported by nonlinear viscoelastic foundations subjected to harmonic moving loads is studied. A straightforward solution technique applicable in the frequency domain is presented in this paper. The governing equations are solved using a perturbation method in conjunction with complex Fourier transformation. A closed-formed solution is presented in an integral form based on the presented Green's function and the theorem of residues is used for the calculation of integrals. The solution is directed to compute the deflection and bending moment distribution along the length of the beam. A parametric study is carried out and influences of the load speed and... 

The ride comfort of high-speed trains passing over railway bridges is studied in this paper. The effects of some nonlinear parameters in a carriage-track-bridge system are investigated such as the load-stiffening characteristics of the rail-pad and the ballast, rubber elements in the primary and secondary suspension systems. The influence of the track irregularity and train speed on two comfort indicators, namely Sperling's comfort index and the maximum acceleration level, are also studied. Timoshenko beam theory is used for modelling the rail and bridge and two layers of parallel damped springs in conjunction with a layer of mass are used to model the rail-pads, sleepers and ballast. A... 

This study presents a novel perspective on pressure-transient analysis (PTA) of downhole-pressure and flow-rate data by use of system-identification (SI) techniques as widely used in advanced process engineering. Key features of the paper are that it considers the classic PTA process from a system-theoretical perspective; derives the causal structure of the flow dynamics; proposes a method to deal with continuously varying pressure and flow-rate signals contaminated with correlated noise, which estimates physical reservoir parameters through a systematic matching procedure in the frequency domain; and can cope with arbitrary (i.e., not necessarily piecewise constant) flow-rate signals. To... 

The learning vector quantization (LVQ) neural network is a useful tool for pattern recognition. Based on the network weights obtained from the training set, prediction can be made for the unknown objects. In this paper, discrimination of wines based on 2D NMR spectra is performed using LVQ neural networks with orthogonal signal correction (OSC). OSC has been proposed as a data preprocessing method that removes from X information not correlated to Y. Moreover, the partial least squares discriminant analysis (PLS-DA) method has also been used to treat the same data set. It has been found that the OSC-LVQ neural networks method gives slightly better prediction results than OSC-PLS-DA © 2005... 

In this paper we study and evaluate the performance of a spectral-phase encoded optical CDMA (SPE-OCDMA) system using advanced receiver structures based on second harmonic generation (SHG) effect imposed in a Thick or Thin crystal. This receiver structure is employed as the nonlinear pre-processor prior to the conventional low-speed photodetector. In our performance evaluation amplified spontaneous emission (ASE) of the optical amplifiers, receiver front end thermal noise and photodetector shot noise which are effective in low power conditions, and multiple access interference (MAI) noise which is the dominant source of noise in high power conditions in any coherent OCDMA communications... 

The studies on forced migrants' digitally mediated communication and transnational practices have not sufficiently addressed contexts in which migrants are imposed with strong regulations on their physical mobility and information and communication technology (ICT), Internet, and social media uses. This article studied Internet and social media uses, digital divides (access, use, and the impact of Internet and social media), and digital transnational practices among Afghans in Iran. More than three million Afghans live in different legal, economic, and social positions in Iran. The analysis was based on surveys with 2003 Afghan refugees, other legally authorized Afghan immigrants, and... 

The mathematical modeling of a bolted joint with a Shape Memory Alloy (SMA) actuator ring is presented. In this way, phase transformation, constitutive and displacement compatibility equations are used. The obtained model is utilized to show how the application of the SMA actuator ring in the bolted joint can help the joint to recover a significant amount of its lost clamping force. The model is run using the experimental data obtained for the Ni-55.7%wt Ti SMA in the companion paper (Part 1). The mechanical properties of SMA are calculated using the mentioned equations and compared to the experimental findings. It is observed that the final clamping force obtained theoretically is close to... 

Residual stresses, created in a steel beam by elastic-plastic bending, are predicted using an approximate analysis and the finite element method. The predictions are compared to experimental measurements obtained from the application of incremental centre hole drilling, deep hole drilling and neutron diffraction methods. Finite element simulations of the incremental centre hole drilling and deep hole drilling methods applied to the predicted residual stresses permitted an assessment of their ability to reconstruct the stresses. An analytical reconstruction analysis using an Airy stress function together with boundary and equilibrium conditions is developed and applied to the predictions and... 

A unique combination of a supported cobalt complex and the first example of supported NHPI in acetic acid gives a surprisingly stable heterogeneous catalytic system for the selective aerobic oxidation of methylaromatics to benzaldehydes at atmospheric pressure. © The Royal Society of Chemistry 2005  

The water cycle algorithm (WCA) is a nature-inspired meta-heuristic recently contributed to the community in 2012, which finds its motivation in the natural surface runoff phase in water cycle process and on how streams and rivers flow into the sea. This method has been so far successfully applied to many engineering applications, spread over a wide variety of application fields. In this paper an enhanced discrete version of the WCA (coined as DWCA) is proposed for solving the Symmetric and Asymmetric Traveling Salesman Problem. Aimed at proving that the developed approach is a promising approximation method for solving this family of optimization problems, the designed solver has been... 

Nanocrystalline and nanostructured TiO2-Cr2O3 thin films and powders were prepared by a facile and straightforward aqueous particulate sol-gel route at low temperature of 400°C. The prepared sols showed a narrow particle size distribution with hydrodynamic diameter in the range of 17.7 nm to 19.0 nm. Moreover, the sols were stable over 4 months, with constant zeta potential measured during this period. The effect of the Cr:Ti molar ratio on the crystallization behavior of the products was studied. X-ray diffraction (XRD) analysis revealed that the powders crystallized at low temperature of 400°C, containing anatase-TiO2, rutile-TiO2, and Cr2O3 phases, depending on the annealing temperature... 

The low temperature perovskite-type calcium titanate (CaTiO3) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route. The prepared sol had a narrow particle size distribution about 17 nm. X-ray diffraction and Fourier transform infrared spectroscopy revealed that, the synthesized powders had highly pure and crystallized CaTiO3 structure with preferable orientation growth along (1 2 1) direction at 400-800 °C. The activation energy of crystal growth was calculated 5.73 kJ/mol. Furthermore, transmission electron microscope images showed that the average crystallite size of the powders annealed at 400 °C was around 3.5... 

Nanocrystalline TiO 2-Fe 2O 3 thin films and powders were prepared by a straightforward aqueous particulate sol-gel route at the low temperature of 300 °C. Titanium(IV) isopropoxide and iron(III) chloride were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the powder crystallised at the low temperature of 300 °C, containing anatase-TiO 2 and hematite-Fe 2O 3 phases. Furthermore, it was found that Fe 2O 3 retarded the anatase-to-rutile transformation up to 500 °C. The activation energies for crystallite growth of TiO 2... 

The morphological manipulation and structural characterisation of TiO 2-MgO binary system by an aqueous particulate sol-gel route were reported. Different crystal structures including pure MgTiO 3, mixtures of MgTiO 3 and TiO 2 and mixtures of MgTiO 3 and Mg 2TiO 4 were tailored by controlling Mg:Ti molar ratio and annealing temperatures as the processing parameters. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that all compounds crystallised at the low temperature of 500 °C. Furthermore, it was found that the average crystallite size of the compounds depends upon the Mg:Ti molar ratio as well as the annealing temperature, being in the range 3-5 nm at... 

Nanocrystalline TiO2-AgO thin films and powders were prepared by an aqueous particulate sol-gel route at the low temperature of 573 K (300 °C). Titanium tetraisopropoxide and silver nitrate were used as precursors, hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) revealed that the phase composition of the mixed oxide depends upon the annealing temperature, being a mixture of TiO2 and AgO in the range 573 K to 773 K (300 °C to 500 °C) and a mixture of TiO2, AgO, Ag2O at 973 K (700 °C). Furthermore, one of the smallest crystallite sizes was obtained for TiO... 

Nanostructured TiO2-ZrO2 thin films and powders were prepared by a straightforward aqueous particulate sol-gel route. Titanium (IV) isopropoxide and zirconium (IV) acetate hydrate were used as precursors, and hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy revealed that the powder were crystallised at the low temperature of 500 °C, containing anatase-TiO 2 and tetragonal-ZrO2 phases. Furthermore, it was found that ZrO2 retarded the anatase-to-rutile transformation up to 900 °C. The activation energies for crystallite growth of TiO2 and ZrO2 components in... 

The low temperature perovskite-type strontium titanate (SrTiO 3) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route. The prepared sol had a narrow particle size distribution with hydrodynamic diameter of about 17 nm. X-ray diffraction (XRD) revealed that the synthesized powders had a perovskite-SrTiO 3 structure with preferable orientation growth along the (1 0 0) direction. TEM images showed that the average crystallite size of the powders annealed in the range 300-800°C was around 8 nm. FE-SEM analysis and AFM images revealed that the deposited thin films had mesoporous and nanocrystalline structure with the... 

Perovskite-type barium strontium titanate (BST) thin films and powders with nanocrystalline and mesoporous structure were prepared by a straightforward particulate sol-gel route at room temperature. The prepared sol had a narrow particle size distribution of about 20 nm. X-ray diffraction (XRD) revealed that phase composition and preferable orientation growth of BST depended upon the annealing temperature. Transmission electron microscope (TEM) images showed that the crystallite size of the powders decreased with increasing annealing temperature from 8 nm at 25 °C down to 5 nm at 800 °C. Field emission scanning electron microscope (FE-SEM) analysis and atomic force microscope (AFM) images...