Sharif Digital Repository

The brushless doubly fed induction generator (BDFIG) has substantial benefits, which make it an attractive alternative as a wind generator. However, it suffers from lower efficiency and larger dimensions in comparison with the doubly fed induction generator. A major part of drawbacks arises from undesirable spatial harmonics of air-gap magnetic field. Calculation of core loss is an important issue in optimal design studies to improve the performance characteristics. The iron loss is higher and has a more complex nature in BDFIGs in contrast with conventional machines. Furthermore, additional losses cannot be ignored due to a high level of spatial harmonics distortion. This paper aims to... 

Brushless Doubly-Fed Induction Generator has attractive features to be the first choice in next generation of wind generators. However, its efficiency and power-to-weight ratio are slightly lower in comparison to induction machine with the same rating. Considerable part of these imperfections arises from the rotor design, which produces magnetic field with considerable undesirable spatial harmonics. This paper proposes a novel rotor configuration to reduce spatial harmonic distortion of air-gap magnetic field as well as improving some drawbacks of the conventional structure, including unequal magnitudes of rotor bar currents, teeth saturation at low average air gap magnetic fields, high core... 

Brushless Doubly fed machines have two stator windings and an especial cage rotor. The main advantage of the machine is higher reliability in compare with DFIGs. Cross coupling is the mechanism, which provides indirect coupling of the two stator windings. In this paper, time and space harmonics in a BDFM are studied to find a criterion for evaluating different rotor designs and better cross coupling, based on the space harmonics. Then the equivalent space and time harmonic circuits are established, using basic equivalent circuit. Finally, the effects of these harmonics on the torque-speed characteristic are studied  

In this paper the finite element model of the Brushless Doubly-Fed Machine is presented. A magnetodynamic finite element model allowing the simulation of the healthy and faulted machine with its special rotor topology is extracted and simulated. To verify the validation of the proposed model the results are compared with couple circuit model, which used generalized harmonic theory  

Brushless doubly fed induction generator (BDFIG) has substantial benefits, which make it an attractive alternative as a wind turbine generator. However, it suffers from lower efficiency and larger dimensions in comparison to DFIG. Hence, optimizing the BDFIG structure is necessary for enhancing its situation commercially. In previous studies, a simple model has been used in BDFIG design procedure that is insufficiently accurate. Furthermore, magnetic saturation and iron loss are not considered because of difficulties in determination of flux density distributions. The aim of this paper is to establish an accurate yet computationally fast model suitable for BDFIG design studies. The proposed... 

In view of its special features, the brushless doubly fed induction generator (BDFIG) shows high potentials to be employed as a variable-speed drive or wind generator. However, the machine suffers from low efficiency and power factor and also high level of noise and vibration due to spatial harmonics. These harmonics arise mainly from rotor winding configuration, slotting effects, and saturation. In this paper, analytical equations are derived for spatial harmonics and their effects on leakage flux, additional loss, noise, and vibration. Using the derived equations and an electromagnetic-thermal model, a simple design procedure is presented, while the design variables are selected based on... 

The brushless doubly-fed induction generator (BDFIG) has substantial benefits, which make it an attractive alternative as a wind turbine generator. The aim of this work is to present a nodal-based magnetic equivalent circuit (MEC) model of the BDFIG which provides performance characteristics and flux density distributions. The model takes into account stator winding distributions, special configuration of rotor bars, slotting effects, teeth saturation, flux fringing and current displacement effects. The real flux tubes are considered for creating an MEC network and calculating its non-linear elements. A method for simplifying the rotor magnetic network has been applied and Gauss elimination... 

The application of the brushless doubly-fed machine (BDFM) is in wind power generation in harsh conditions, where reliability is important. In this paper, eddy current losses in a BDFM in four categories: a) the rotor classic eddy current losses, b) stator classic eddy current losses, c) rotor excessive eddy current losses, and d) stator excessive eddy current losses, are calculated for single frequency of the rotor and double frequency of the stator magnetic fields  

In this paper, harmonic sources in a BDFM are studied, and a method for specifying rotor and stator space harmonic components is established. A criterion for evaluating different rotor designs is introduced, based on space harmonics. Then the equivalent space and time harmonic circuits are obtained, using basic equivalent circuit. Finally, the effects of these harmonics on the torque-speed characteristic are studied  

In this paper, a new structure for the rotor of the Brushless Doubly-Fed Machine (BDFM) is introduced to reduce the machine's torque ripple. The ripple has a considerable effect on the machine start up. At the first section of the paper, analytical expressions for the air gap permeance distribution, the air gap MMF distribution, cogging torque and back EMF are presented. Then, the effects of skewing the rotor loops are analyzed. Finally, the relation between non-skewed quantities and their values in skewed coordinate are introduced  

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters  

One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50... 

Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of... 

Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion... 

Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for...