Sharif Digital Repository

In this research, electrically performance, vibration/resonance characteristics, low-velocity impact, and absorbed energy of the piezoelectric doubly curved panel on the viscoelastic substrate is carried out. For modeling the contact force between the structure and impactor, Hertz contact theory is presented. Hamilton's principle and first-order shear deformation theory (FSDT) are presented for obtaining the governing and boundary condition equations of the structure under the low-velocity impact. Galerkin and Newmark solution procedures are presented for solving the governing equation in displacement, and time domains, respectively. This study's novelty is considering the effect of... 

The thickness of shallow landslides is generally less than 2 m, which is of the same order of magnitude as the growth range of vegetation roots. Vegetation roots can improve the stability of shallow soil through mechanical and hydraulic effects. Therefore, the landslide process is closely related to the plant roots growing on the slope surface. Plant roots play a dominant role in the regulation of soil suction through solar radiation induced transpiration. However, little is known about the correlation between cumulative solar radiation and soil suction. Moreover, the specific effects of fine roots on the suction distribution are not clear in most previous studies. In this study, a vegetated... 

The simple-shear condition is closer to reality than the direct-shear condition for simulating the mechanical behavior of vegetated soil slope under shallow failure. However, study on simple-shear characteristics for vegetated slope is still insufficient, and there lacks intuitive comparison of characteristics between these two shear conditions. In this study, large-scale simple-shear and direct-shear experiments were conducted on soil permeated by roots of Amorpha fruticosa to investigate the shear strength and stiffness. The stress-displacement relationship of each sample was obtained and further normalized to unify the influence of root content. The results reveal that the direct-shear... 

This article is the first attempt to employ deep learning to estimate the frequency performance of the rotating multi-layer nanodisks. The optimum values of the parameters involved in the mechanism of the fully connected neural network are determined through the momentum-based optimizer. The strength of the method applied in this survey comes from the high accuracy besides lower epochs needed to train the multi-layered network. It should be mentioned that the current nanostructure is modeled as a nanodisk on the viscoelastic substrate. Due to rotation, the centrifugal and Coriolis effects are considered. Hamilton’s principle and generalized differential quadrature method (GDQM) are presented... 

This article is the first attempt to employ deep learning to estimate the frequency performance of the rotating multi-layer nanodisks. The optimum values of the parameters involved in the mechanism of the fully connected neural network are determined through the momentum-based optimizer. The strength of the method applied in this survey comes from the high accuracy besides lower epochs needed to train the multi-layered network. It should be mentioned that the current nanostructure is modeled as a nanodisk on the viscoelastic substrate. Due to rotation, the centrifugal and Coriolis effects are considered. Hamilton’s principle and generalized differential quadrature method (GDQM) are presented... 

Sentiment analysis plays a key role in companies, especially stores, and increasing the accuracy in determining customers’ opinions about products assists to maintain their competitive conditions. We intend to analyze the users’ opinions on the website of the most immense online store in Iran; Digikala. However, the Persian language is unstructured which makes the pre-processing stage very difficult and it is the main problem of sentiment analysis in Persian. What exacerbates this problem is the lack of available libraries for Persian pre-processing, while most libraries focus on English. To tackle this, approximately 3 million reviews were gathered in Persian from the Digikala website using... 

Although the role of individual ingredients of hot mix asphalt (HMA) such as asphalt binder and aggregates on its performance is readily recognized, there is only limited understanding about the interactions between these components and the properties of binder-aggregate interface. In order to study the interactions between asphalt binder and mineral aggregates, an interfacial test method was developed and its effectiveness was evaluated. Interfacial interactions were evaluated by testing thin films of an asphalt binder interfaced with the surface of aggregates under two different modes of loading in shear: sinusoidal oscillation and monotonically increasing. An Interaction Parameter (IP)... 

This study aimed to investigate the effects of Bacillus amyloliquefaciens LFB112 on the growth performance, carcass traits, immune response, and serum biochemical parameters of broiler chickens. A total of 396 1 day old, mixed-sex commercial Ross 308 broilers with similar body weights were allotted into six treatment groups. The assigned groups were the CON group (basal diet with no supplement), AB (antibiotics) group (basal diet + 150 mg of aureomycin/kg), C+M group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 powder with vegetative cells + metabolites), C group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 vegetative cell powder with removed metabolites), M group... 

This study aimed to investigate the effects of Bacillus amyloliquefaciens LFB112 on the growth performance, carcass traits, immune response, and serum biochemical parameters of broiler chickens. A total of 396 1 day old, mixed-sex commercial Ross 308 broilers with similar body weights were allotted into six treatment groups. The assigned groups were the CON group (basal diet with no supplement), AB (antibiotics) group (basal diet + 150 mg of aureomycin/kg), C+M group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 powder with vegetative cells + metabolites), C group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 vegetative cell powder with removed metabolites), M group... 

This paper experimentally investigates the influence of hydrogen enrichment on the combustion and emission characteristics of a diesel HCCI engine using a modified Cooperative Fuel Research (CFR) engine. Three fuels, n-heptane and two middle distillates with cetane numbers of 46.6 and 36.6, are studied. The results show that hydrogen enrichment retards the combustion phasing and reduces the combustion duration of a diesel HCCI engine. Besides, hydrogen enrichment increases the power output and fuel conversion efficiency, and improves the combustion stability. However, hydrogen enrichment may narrow the operational compression ratio range and increase the knocking tendency. Both the overall... 

We propose a novel multi-parallel layer DCN architecture based on low radix FOS. Results show cost and power consumption reduction of 4 parallel-layer architecture is 60% and 26.7% with respect to the FatTree. © 2019 The Institute of Electronics, Information and Communication Engineers (IEICE)  

This paper reports on the NTIRE 2021 challenge on perceptual image quality assessment (IQA), held in conjunction with the New Trends in Image Restoration and Enhancement workshop (NTIRE) workshop at CVPR 2021. As a new type of image processing technology, perceptual image processing algorithms based on Generative Adversarial Networks (GAN) have produced images with more realistic textures. These output images have completely different characteristics from traditional distortions, thus pose a new challenge for IQA methods to evaluate their visual quality. In comparison with previous IQA challenges, the training and testing datasets in this challenge include the outputs of perceptual image... 

Sunflower oil was used as environmentally friendly source to develop novel self-catalyzed waterborne polyurethanes (WPUs) as efficient corrosion inhibitors for sour oilfield solution. A comprehensive experimental and computational analysis was performed to evaluate the inhibition effect of WPUs. The results of electrochemical measurements indicated that 200 µM of WPUs were effectively protected mild steel from sour corrosion by 95% and 94.6% at 25 °C and 60 °C, respectively. Furthermore, it was found that the best inhibition efficiency was provided by WPU when pyrrolidine was included in its structure, particularly at 60 °C. Additionally, a smoother steel surface was observed in the presence... 

Microchannels in hydrogels play an essential role in enabling a smart contact lens. However, microchannels have rarely been created in commercial hydrogel contact lenses due to their sensitivity to conventional microfabrication techniques. Here, we report the fabrication of microchannels in poly(2-hydroxyethyl methacrylate) (poly(HEMA)) hydrogels that are used in commercial contact lenses with a three-dimensional (3D) printed mold. We investigated the corresponding capillary flow behaviors in these microchannels. We observed different capillary flow regimes in these microchannels, depending on their hydration level. In particular, we found that a peristaltic pressure could reinstate flow in... 

Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period... 

In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,... 

An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of... 

Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress... 

Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no... 

Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters