Sharif Digital Repository

This research attempts to develop the optimal solution for an inventory problem consisting of a single machine which produces items some of which may be defective. We assume that no shortages are allowed and all defective items are to be reworked. Setup cost for rework and waiting time of defectives are considered. This research consists of two different parts. In the first part we consider two different policies where in the first policy in each cycle after the regular production the machine is setup for the rework of defectives of the same cycle. In the second policy several cycles constitute a period. All the defectives produced in the period are reworked in the last cycle of that period.... 

In the current century, an energy storage is one of the critical and important factors affecting on human life. Rechargeable batteries, specially Lithium ion batteries (LIBs), can be considered as ideal energy storage devices including various advantages e.g. high energy and power densities. In this work, Tin IV sulfide (SnS2) and its composites, making by conductive materials e.g. Reduced Graphene Oxide (SnS2@rGO), are prepared during two different synthesis methods consisting of Hydrothermal and Hot-bath, and their properties are investigated as anode material in LIB. The structural and electrochemical analyses demonstrated that the composite sample prepared by hot-bath method exhibited... 

Nowadays, with the increasing number of polyethylene terephthalate wastes, the issue of its recycling has become very important. Among the problems of polyethylene terephthalate recycling are its loss of crystallinity and mechanical properties. Recycled polyethylene terephthalate does not have the properties of new polyethylene terephthalate and using its mixture with other materials is an effective way to remove its waste from nature and return it to the production cycle. The aim of this study is to produce a mixture of recycled polyethylene terephthalate with polycarbonate and glass fibers with mechanical properties such as good impact strength, which ultimately leads to the production of... 

During the turning operation, the interaction of the metal cutting process and machine tool causes a dynamic instability called self-excited vibration or chatter. Limited productivity rate, decrease in tool life, poor surface quality and noisy workplace are some adverse effects of the chatter vibration. Chatter suppression in machining processes results in more material removal rate, high precision and surface quality. In this thesis, two control strategies are developed to suppress chatter vibration in turning process including a worn tool. A single degree of freedom model of the turning process including tool wear is briefly described. In the first stage, a sinusoidal spindle speed... 

Due to the data centers rapid growth and introduction of a new basic type of massive data processing platforms which requires accelerators to speedup computation and enhance the efficiency and reduce power consumption, using accelerators is inevitable. Communication and data transfer time between software and hardware is the most of time spent on the use of accelerators. By optimizing this part of the hardware / software platform, we have achieved substantial results in this area. The aim of our study is to organize a survey of real accelerator characteristics. To figure out its defects and main drawbacks, in addition to improving the overall efficiency of system. The implementation of... 

Although the issue of separation is studied frequently in the last few decades, in presence of numerous parameters and unknown effects of earthquakes and soil condition, scientists confront with remarkable difficulties. It was supposed that performance of structures which are secluded from soil remains in the elastic region and doesn’t bear nonlinearity. But according to recent studies, scientist assert that nonlinear performance might be possible as a result of various soil condition and ingredients of earthquake(magnitude and frequency). General procedure for seismic improvements of structures includes increasing the strength and resistance, capability of structure to absorb energy and... 

Reviewing trends of energy consumption in the world reveals that sooner or later energy resources will be depleted. This concerning rate of consumption has brought about more greenhouse gases (GHG) emission influencing deleteriously on environment and climate. Human has continued energy consumption to maintain and improve the quality of his life through industrial production. Industry as a significant energy user owns considerable contribution to this consumption. Several attempts have been carried out to develop energy management systems in order to improve the energy efficiency of industrial sectors. Whilst they are comprehensive and could be applied to any sector, there is lack of... 

The behavior of boundary layer under the effect of the sweep angle is considered. The measurements were performed by a pitot tube rake. Three models with various sweep angels at angles of attack -2, 0 and 2 degree were tested. Both tip and root of all wings were closed by flat plates in order to prevent the flow to roll-up. However the flow field on the wing was still three-dimensional because of the sweep angle. The velocity on the wing has two components; longitudinal and lateral. The cross flow emerges due to the non-equilibrium of pressure and centrifugal forces. The velocity profiles showed that the magnitude of cross flow was stronger near the leading edge of the wing. The cross flow... 

Energy harvesters are used in today’s Wireless Sensor Networks (WSNs) to harvest the energy from the environment. One of the important advantages of the energy harvesting sensor networks over battery-operated sensor networks is that the use of the energy harvester prolongs the life time of the nodes, while a battery-operated node becomes useless once its energy runs out. Although an energy harvester can provide a supply source with a lifetime much greater than a battery, the amount of available energy for an energy harvesting system is a random variable and is not as predictable as the energy of a battery. This unpredictability may cause reliability problems. In order to solve the existing... 

The competitiveness of a port convinced shipping lines and shippers with a significant basis in selecting a port. Port authorities and port operators can make use of the competitive advantage as a parameter for counter measures by grasping the advantages and disadvantages of the ports and be a prime factor of opportunities and threats of the ports. Ports have a significant role in today’s networked business environment. They are being regarded as hubs that are part of various logistic systems. The very essence of a seaport is to link maritime networks and land network. These networks for the port are means of analyzing its competitiveness. A port overall competitiveness is determined by it’s... 

Wireless Sensor Networks have become widespread because of their flexibility, applicability and ability to precept data with high accuracy. However, the most limiting factor in their usage is the amount of available energy in nodes since energy depletion in a node means that it is dead, therefore many efforts have been done for optimum energy management in Wireless Sensor Networks. In many cases, the key solution to prolong the network lifetime is load balancing. In this way, all the nodes will die (approximately) together and the lifetime of network will be maximized. Load balancing can be implemented in all layers from physical layer to application. It should be noted that it is not always... 

In recent decades the use of FRP materials for strengthening structures has been developed extensively, thanks to their high strength, sufficient stiffness, high durablity, and ease of use. A great deal of research has been conducted on strengthening reinforced concrete beams and columns with FRP composites. By contrast, not many researches are performed on slabs, especially two-way slabs. In these few researches, the loading and boundary conditions are limited to simplest ones. Therefore, in this thesis, the focus of attention is on strengthening reinforced concrete slabs under various loads and boundary conditions using FRP composites.
In this thesis, first, FRP composites and their... 

Concrete is the second most structural material in the world. So attention and promotion of the concrete mix design with respect to variable issues and requirements, is very important. On the other hand, these days environment and its pollution has become very popular discussion. Waste-glass which is produced by human products is one of the environmental pollutants. In this thesis it replaces some aggregate in concrete and it can reduce the level of this material in the world. Also we study effects of silica-fume as cement replacement and properties enhancer in our concrete mix design and see how it can ... 

Immensity and profundity of mathematical logic have provided an opportunity for its interconnection with other branches of science, one of which is computer science where theory of dependent types and lambda calculus lounges amongst the area of their overlap. The former has been engendered for the sake of deepening the connection between mathematical logic and programming. On the other side, lambda calculus which is a formal system in mathematical logic and computer science, developed as a tool for formal computations, could also be counted as a programming discipline. It is the objective of this thsis to study the two aforementioned fields with emphasis on unification of higher-order...