Sharif Digital Repository

In this study, natural convection heat transfer in a vertical flat-plate solar air heater of 2.5 m height and 1 m width, with one- and two-glass covers was studied experimentally. Totally six cases of airflow (two for air heater with one glass cover and four for air heater with two-glass covers) were considered. These cases included states that air could flow within spaces between absorber plate and glass covers or air was enclosed in such spaces. Absorber plate temperature, back-plate temperature, glass cover temperatures, mass flow rates of air within channels and the solar radiation were measured. The following relations are suggested:. For channels in which air could flow:Nu = 0.7362... 

We study the structure of a minimum dominating set of C2n+1 n, the Cartesian product of n copies of the cycle of size 2n + 1, where 2n + 1 is a prime  

Circular chromatic number, χc is a natural generalization of chromatic number. It is known that it is NP-hard to determine whether or not an arbitrary graph G satisfies χ(G)= χc(G). In this paper we prove that this problem is NP-hard even if the chromatic number of the graph is known. This answers a question of Xuding Zhu. Also we prove that for all positive integers k ≥ 2 and n ≥ 3, for a given graph G with χ(G)= n, it is NP-complete to verify if χc(G)≤ n -1/k. © 2004 Wiley Periodicals, Inc  

Suppose we have a family F of sets. For every S∈F, a set D⊆S is a defining set for (F,S) if S is the only element of F that contains D as a subset. This concept has been studied in numerous cases, such as vertex colorings, perfect matchings, dominating sets, block designs, geodetics, orientations, and Latin squares. In this paper, first, we propose the concept of a defining set of a logical formula, and we prove that the computational complexity of such a problem is Σ2-complete. We also show that the computational complexity of the following problem about the defining set of vertex colorings of graphs is Σ2-complete: INSTANCE: A graph G with a vertex coloring c and an integer k.QUESTION: If... 

We study the 2-center problem with outliers in high-dimensional data streams. Given a stream of points in arbitrary d dimensions, the goal is to find two congruent balls of minimum radius covering all but at most z points. We present a (1.8+ε)-approximation streaming algorithm, improving over the previous (4+ε)-approximation algorithm available for the problem. The space complexity and update time of our algorithm are poly(d,z,1/ε), independent of the size of the stream. © 2016 Elsevier B.V  

It is proved that every n × n Latin square has a partial transversal of length at least n - O (log2 n). The previous papers proving these results (including one by the second author) not only contained an error, but were sloppily written and quite difficult to understand. We have corrected the error and improved the clarity. © 2008  

Fault detection has always an important role in maintaining the system stability and assuring satisfactory and safe operation. In this paper a method based on system identification is used for fault detection on a nuclear reactor. The combination of Extended Kalman Filter and recursive Least Square are used to identify the system parameters. Another goal of this paper is design of a fault tolerant control system for a nuclear reactor during power change operation. The proposed controller is an adaptive neuro-fuzzy controller based on emotional learning. Performance of the controller in term of transient response and robustness against failure is very good and outstanding  

This paper focuses on the use of quadratic time-frequency distributions (QTFDs) to characterize the temporal variation of low-frequency electromechanical oscillations (LFEOs) using ringdown data. A refined Margenau-Hill distribution (MHD) and a procedure to extract the instantaneous frequencies and damping factors as well as initial phase angles of system low-frequency modes when the analyzed signal is multi-component are proposed. The refinement process enjoys a fast-converging iterative algorithm and without loss of generality it can be applied to other QTFDs for using in other applications. A non-stationary synthetic signal as well as simulated ringdown data of a 5-area, 16-machine power... 

The stress field of a multi-phase spherical/cylindrical inhomogeneity with arbitrary interface bonding conditions, subjected to both a uniform temperature change and a uniform hydrostatic tension, is presented. Imperfect bonding conditions are modeled using linear spring model and coherent interface model. In nanosize inhomogeneities, since the surface energy is not negligible with respect to the bulk energy, the effect of surface stresses is incorporated into the formulation. Accurate estimates for the thermal stresses of a functionally graded coated inhomogeneity with perfect and /~or imperfect interfaces are given. The influence of coating stiffness, coating thickness and interface... 

Hydrophobic titania nanoparticles were synthesized by a novel in situ sol-gel method and applied in a single drop liquid-liquid extraction column to enhance the overall dispersed-phase mass transfer coefficient (Kod). The chemical system of toluene, acetic acid and water was used, and the direction of solute (acetic acid) mass transfer was from dispersed phase, including: toluene and acetic acid to the continuous phase of water. For such system, much of the mass transfer resistance exists in the dispersed phase, which is nonpolar organic liquid. Hence, modified titania nanoparticles (MTNP's), prepared by sol-gel route, in five different concentrations of 0.001–0.005 wt.% were added in the... 

The impact of modified magnetite nanoparticles (MMNPs)on hydrodynamics and mass transfer in liquid–liquid extraction process was assessed using a ternary chemical system of toluene-acetic acid–water. The organic phase which contained toluene and acetic acid was dispersed through water, and the mass transfer of acetic acid between two phases was investigated. The hydrophobic modified magnetite nanoparticles (MMNPs)prepared through an optimized in-situ method were added to the dispersed phase at different concentrations (0.001−0.005 wt%). Two separate conditions were provided in the experiments, i.e. stagnant and stirred continuous phase. The latter case was provided by a rotor at two... 

The stress fields of cylindrical and spherical multi-phase inhomogeneity systems with perfect or imperfect interfaces under uniform thermal and far-field mechanical loading conditions are investigated by use of the Boussinesq displacement potentials. The radius of the core inhomogeneity and the thickness of its surrounding coatings are arbitrary. The discontinuities in the tangential and normal components of the displacement at the imperfect interfaces are assumed to be proportional to the associated tractions. In this work, for the problems where the phases of the inhomogeneity system are homogeneous, the exact closed-form thermo-elastic solutions are presented. These solutions along with a... 

The determination of the thermo-mechanical stress field in and around a spherical/ cylindrical inhomogeneity surrounded by a functionally graded (FG) coating, which in turn is embedded in an infinite medium, is of interest. The present work, in the frame work of Boussinesq/Papkovich-Neuber displacement potentials method, discovers the potential functions by which not only the relevant boundary value problems (BVPs) in the literature, but also the more complex problem of the coated inhomogeneities with FG coating and sliding interfaces can be treated in a unified manner. The thermo-elastic fields pertinent to the inhomogeneities with multiple homogeneous coatings and various combinations of... 

A simple method for the formation of inclusion complex of [60]fullerene with two O2N2-donor aza-crown macrocyclic ligands was introduced. The products were characterized using UV-vis and IR spectroscopies as well as HPLC, and ESI mass spectrometry. The ESI mass and elemental analysis data revealed that the ratio of macroring:[60]fullerene were not the same. The binding capability of the macrorings as well as the number of the macroring addends to [60]fullerene were investigated using thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). Considering percentage mass loss in different steps of TG and the enthalpy changes in DSC found for each of these products, the number... 

In this paper an approach based on system identification is used for fault detection in a nuclear reactor. A continuous-time Extended Kalman Filter (EKF) is presented, which allows the parameters of the nonlinear system to be estimated. Also a fault tolerant control system is designed for the nuclear reactor during power changes operation. The proposed controller is an adaptive critic-based neuro-fuzzy controller. Performance of the controller in terms of transient response and robustness against failures is very good and considerable