Sharif Digital Repository

A single storey full-scale unreinforced brick masonry building with confined walls was designed based on Iranian building code and constructed on the shaking table facility of EERC of Sharif University of Technology. The model consisted of plain brick masonry walls confined with concrete tie columns and steel bond beams and had a typical jack-arch roof system. Wall panels included openings of different dimensions making it possible to investigate the effects of shape, geometry and location of openings. The model was subjected to several seismic excitations, consisting of scaled records of Bam 2003, Tabas 1978 and Elcentro 1940 earthquakes as well as a harmonic acceleration with a gradually... 

Named Data Networking (NDN) is a new information-centric networking architecture in which data or content is identified by a unique name and saved pieces of the content are used in the cache of routers. Certainly, routing is one of the major challenges in these networks. In NDN, to achieve the required data for users, interest messages containing the names of data are sent. Because the source and destination addresses are not included in this package, routers forward them using the names that carried in packages. This forward will continue until the interest package is served. In this paper, we propose a routing algorithm for NDN. The purpose of this protocol is to choose a path with the... 

Named data networking (NDN) is a new information-centric networking architecture in which data or content is identified by a unique name and saved pieces of the content are used in the cache of routers. Certainly, routing is one of the major challenges in these networks. In NDN, to achieve the required data for users, interest messages containing the names of data are sent. Because the source and destination addresses are not included in this package, routers forward them using the names that carried in packages. This forward will continue until the interest package is served. In this paper, we propose a routing algorithm for NDN. The purpose of this protocol is to choose a path with the... 

Although phase change memory with multi-bit storage capability (known as MLC PCM) offers a good combination of high bit-density and non-volatility, its performance is severely impacted by the increased read/write latency. Regarding read operation, access latency increases almost linearly with respect to cell density (the number of bits stored in a cell). Since reads are latency critical, they can seriously impact system performance. This paper alleviates the problem of slow reads in the MLC PCM by exploiting a fundamental property of MLC devices: the Most-Significant Bit (MSB) of MLC cells can be read as fast as SLC cells, while reading the Least-Significant Bits (LSBs) is slower. We propose... 

Phase Change Memory (PCM) devices are one of the known promising technologies to take the place of DRAM devices with the aim of overcoming the obstacles of reducing feature size and stopping ever growing amounts of leakage power. In exchange for providing high capacity, high density, and nonvolatility, PCM Multilevel Cells (MLCs) impose high write energy and long latency. Many techniques have been proposed to resolve these side effects. However, read performance issues are usually left behind the great importance of write latency, energy, and lifetime. In this article, we focus on read performance and improve the critical path latency of the main memory system. To this end, we exploit... 

This research is aimed at geometric analysis of parabolic trough solar collector (PTC) in different sizes of the main components of the system. The rate of the Local Concentration Ratio (LCR) on the receiver tube and optical efficiency are two main features in geometric optimization of the parabolic trough solar collectors. In this work, parabolic trough solar collector was optimized for different sizes with three design variables: the receiver diameter, the collector aperture width and the rim angle. The method used in this research was the Monte Carlo Method (MCM) in MATLAB. The optical and geometric modeling was developed for coding in MATLAB. For the case study, a parabolic trough solar... 

The exergoeconomic analysis is a powerful tool to study an energy system and provide rational decision-making for it. This paper is aimed at exergoeconomic optimization and sensitivity analysis evaluation of the results of a commercial parabolic trough collector (PTC). First, an analysis of optical, thermal, exergy, and economic equations of the PTC system is presented. Then, the objective function and variables are optimized through MATLAB software using the hybrid algorithm code. The objective function as the exergy loss rate is a combination of exergy loss and system cost. The evaluation of the results has been carried out considering the radiation intensity in different months of the... 

Energy storage and supply in solar thermal collector systems rely heavily on phase change materials (PCM). It is vital to establish the appropriate values for energy discharge time (tPCM) and net amount of stored energy (Qnet) within the PCMs in order to increase the efficiency of solar thermal collectors. For this study, we implemented a multi-objective evolutionary algorithm based on decomposition (MOEA/D) for the optimization process using the MATLAB simulator software. The simulation findings show that, under ideal circumstances where tPCM is large and Qnet is low, these two goal functions are inversely connected to one another. According to an analysis of how input parameters affect the... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...