Loading...
Search for: mehrjoo--mehrdad
0.124 seconds

    Swarm intelligent compressive routing in wireless sensor networks

    , Article Computational Intelligence ; Volume 31, Issue 3 , 2015 , Pages 513-531 ; 08247935 (ISSN) Mehrjoo, S ; Sarrafzadeh, A ; Mehrjoo, M ; Sharif University of Technology
    Blackwell Publishing Inc  2015
    Abstract
    This article proposes a novel algorithm to improve the lifetime of a wireless sensor network. This algorithm employs swarm intelligence algorithms in conjunction with compressive sensing theory to build up the routing trees and to decrease the communication rate. The main contribution of this article is to extend swarm intelligence algorithms to build a routing tree in such a way that it can be utilized to maximize efficiency, thereby rectifying the delay problem of compressive sensing theory and improving the network lifetime. In addition, our approach offers accurate data recovery from small amounts of compressed data. Simulation results show that our approach can effectively extend the... 

    Personalized Diverity in Recommender Systems

    , M.Sc. Thesis Sharif University of Technology Mehrjoo, Mehrdad (Author) ; Jalili, Mahdi (Supervisor)
    Abstract
    Recommender systems are in the center of network science and are becoming increasingly important in individual business for providing efficient personalized services and products to users. The focus of previous research in the field of recommendation systems were on improving the accuracy of the system through designing more accurate recommendation lists. Recently, the community has been paying attention to diversity and novelty of recommendation list as key characteristics of modern recommender systems. In many cases, novelty and precision do not go in the same direction and the accuracy-novelty dilemma is one of the challenging problems in recommender systems, which needs efforts in... 

    Nanodiamonds for surface engineering of orthopedic implants: Enhanced biocompatibility in human osteosarcoma cell culture [electronic resource]

    , Article Diamond and Related Materials ; Volume 40, 2013, Pages 107-114 Mansoorianfar, M. (Mojtaba) ; Shokrgozar, M. A ; Mehrjoo, M ; Tamjid, E ; Simchi, A ; Sharif University of Technology
    Abstract
    Recently, nanodiamonds have attracted interest in biomedical applications such as drug delivery, targeted cancer therapies, fabrication of tissue scaffolds, and biosensors. We incorporated diamond nanoparticles in alginate–bioactive glass films by electrophoretic process to prepare functional coatings for biomedical implants. Turbidity examination by time-resolved laser transmittance measurement revealed that a stable multi-component aqueous suspension of alginate, bioactive glass and diamond particles could be obtained at concentrations of 0.6, 1.3, and 0.65 g/l, respectively. Uniform films with ~ 5 μm thickness were deposited on 316 stainless steel foils by employing constant field... 

    Simultaneous evaluation of magnesia and silica contents’ effect on in-vitro bioactivity of novel bioglasses in the SiO2-CaO-MgO system

    , Article Transactions of the Indian Ceramic Society ; Volume 75, Issue 1 , 2016 , Pages 7-11 ; 0371750X (ISSN) Eslami, M ; Mahdieh, Z ; Maddahi, V ; Shokrgozar, M. A ; Mehrjoo, M ; Sharif University of Technology
    Taylor and Francis Ltd  2016
    Abstract
    In this study, bioglasses in SiO2-CaO-MgO system were synthesized through sol-gel method and the effect of silica and magnesia contents on in-vitro bioactivity of the bioglasses were investigated. XRD patterns showed an amorphous structure after heat treatment at 600°C for 2 h for all glasses and also indicated that after immersion in SBF, apatite particles precipitated on glass surfaces and the rate of apatite formation decreased with increasing Mg/Ca ratio. On the other hand, the apatite formation rate was enhanced with increasing the silica content. Furthermore, magnesia contents increased the compressive strength of the samples. According to SEM, higher Mg/Ca ratio led to increase in... 

    Hybrid cross-linked hydrogels based on fibrous protein/block copolymers and layered silicate nanoparticles: Tunable thermosensitivity, biodegradability and mechanical durability

    , Article RSC Advances ; Volume 6, Issue 67 , 2016 , Pages 62944-62957 ; 20462069 (ISSN) Eslahi, N ; Simchi, A ; Mehrjoo, M ; Shokrgozar, M. A ; Bonakdar, S ; Sharif University of Technology
    Royal Society of Chemistry  2016
    Abstract
    Stimuli responsive polymer hydrogels have sparked a considerable interest for biomedical applications. In this work, we present a novel injectable thermal responsive hydrogel based on mineral nanoclay (LAPONITE®), wool-derived fibrous protein (keratin), triblock copolymer (Pluronic), and chitosan biopolymer with potential applications for articular cartilage tissue engineering. Genipin was utilized as a natural crosslinker. The formation of polymer conjugates between the components is confirmed by FTIR and 1H NMR spectroscopy. The nanocomposite hydrogel contains interconnected pores within the hydrogel network and the size of the pores is found to reduce at higher crosslinking density and on... 

    Nanodiamonds for surface engineering of orthopedic implants: Enhanced biocompatibility in human osteosarcoma cell culture

    , Article Diamond and Related Materials ; Volume: 40 , 2013 , Pages: 107-114 ; 09259635 (ISSN) Mansoorianfar, M ; Shokrgozar, M. A ; Mehrjoo, M ; Tamjid, E ; Simchi, A ; Sharif University of Technology
    2013
    Abstract
    Recently, nanodiamonds have attracted interest in biomedical applications such as drug delivery, targeted cancer therapies, fabrication of tissue scaffolds, and biosensors. We incorporated diamond nanoparticles in alginate-bioactive glass films by electrophoretic process to prepare functional coatings for biomedical implants. Turbidity examination by time-resolved laser transmittance measurement revealed that a stable multi-component aqueous suspension of alginate, bioactive glass and diamond particles could be obtained at concentrations of 0.6, 1.3, and 0.65 g/l, respectively. Uniform films with ~ 5 μm thickness were deposited on 316 stainless steel foils by employing constant field... 

    Flight envelope expansion in landing phase using classic, intelligent and adaptive controllers [electronic resource]

    , Article Journal of aircraft ; 2006, Vol. 43, No. 1 Malaek .S. M. B ; Izadi, Hojjat Allah ; Pakme, Mehrdad
    Abstract
    An expanding flight envelope in the landing phase of a typical jet transport aircraft in presence of strong wind shears using a learning capable control system (LCCS) is investigated. The idea stems fromhuman beings functional architecture that gives them the ability to do more as they age and gain more experience. With the knowledge that classical controllers lack sufficient generality to cope with nonlinear as well as uncertain phenomenon such as turbulent air, the focuse is on different types of intelligent controllers due to their learning and nonlinear generalization capabilities as candidates for the landing flight phase. It is shown that the latter class of controllers could be used... 

    Optimal Design of the Heliostat Field in the Solar Central Receiver Systems

    , M.Sc. Thesis Sharif University of Technology Piroozmand, Pasha (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    In a solar central system plant about 40% of energy losses occurs in the heliostat field. Furtheremore, half of the investment costs for construction of the plant is related to the heliostat field. Therefore, an optimal design of the heliostat field is necessary for reduction of levelized cost of energy in solar tower power plants. In this study, in order to optimally design the heliostat field, first energy performance of the helistat field in one year is simulated. Solar power and sun’s position at each moment of the day is determined by mathematical relations. Then, loss factors in the field are modelled and heliostat field layout is designed by an algorithm. Finally, by using PSO... 

    Modeling and Optimal Design of a Solar Chimney Power Plant

    , M.Sc. Thesis Sharif University of Technology Gharagozlou, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    The power generation system of this type of power plants operates on the air flowing through the power plant’s chimney and colliding with the turbine blades within the chimney. When the solar collector warms the nearby air and thus expands the air by absorbing the sunlight, a difference is created in the density. Then, this difference in the density creates the phenomenon of buoyancy, making the air pass to the top of the chimney through the collector.This study simulated and optimized a solar chimney power plant. The simulation and optimization were performed based on the information of Manzanares Solar Chimney Power Plant in Spain (located in 150 km from the south of Madrid). It was... 

    An efficient graphyne membrane for water desalination

    , Article Polymer ; Volume 175 , 2019 , Pages 310-319 ; 00323861 (ISSN) Mehrdad, M ; Moosavi, A ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    Desalination of sea saline water seems a successful solution to supply clean water. For desalination, novel nanoporous membranes have been proposed as a substitute for the classic reverse osmosis (RO) membranes. The one-atom-thick graphyne membrane has shown great potential in water desalination. By applying functional groups (FGs) into the pores of the monolayer graphyne membranes, the water permeability and the ion rejection were passively increased. The effects of applying various FGs such as Hydrogen, Fluorine, Carboxyl and Amine, effect of the salt concentration, the applied pressure, and the effective diameter of the graphyne pores were determined by molecular dynamics (MD)... 

    Optimal Design of Induction MHD Generator for Electrical Power Generation from Exhaust of the Gas Turbine Power Plants

    , M.Sc. Thesis Sharif University of Technology Barzegar, Iran (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    Today, due to increasing electricity consumption and demand, the use of conventional systems such as thermal, hydro and nuclear power plants is not enough to convert energy. Over the past century, scientists have sought to discover new technologies for exploiting different forms of energy and converting them into high-efficiency electrical energy. One of these ways is to use the phenomenon of magnetohydrodynamics (magnetic fluid dynamics) to convert thermal energy directly into electrical energy. Magnetohydrodynamics is a theoretical field that studies the dynamics of fluids with electrical conductivity. Induction magneto-hydrodynamic generators use ionized hot plasma (a quasi-neutral gas of... 

    Intelligent Control of Hybrid Vehicles based on the Simultaneous Optimization of Fuel Consumption and Pollution Emission

    , M.Sc. Thesis Sharif University of Technology Mamouri, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    The issue under discussion in this paper is to optimize the fuel consumption of the Toyota Prius hybrid car. In order to solve this problem, the ADVISOR design model used by NREL in the Matlab / Simulink environment has been used. Various parts of this model are described. The optimization performed on this issue is based on the emotional controller. This controller works by simulating learning in animals based on encouraging and punishing them. With the introduction of the controller, the model and its inclusion in the fuel consumption control and its implementation have achieved good results. In the initial state and the controller in the model, the fuel consumption was 4.9 liters per 100... 

    Simulation and Multi-Objective Optimization of a Solar Micro CCHP Using Intelligent Techniques

    , M.Sc. Thesis Sharif University of Technology Younesi, Ali (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    Today, due to the scarcity of fossil energy resources, security of energy supply, and increasing environmental concerns, we need to develop new technologies to promote energy-saving and reduce greenhouse gas emissions. One of the suitable options for this purpose is to use the simultaneous production of electric power, cooling, and heating. Meanwhile, trigeneration systems that provide part of their energy needs from the sun, due to the free solar energy source and low environmental impact, can be an ideal technology for clean and safe scattered production. The present study has suggested a trigeneration system of cooling, heating, and power generation based on the organic Rankin cycle and... 

    Investigation of Longitudinal Tabs Effects on Compound Triple Jets Configuration in Film Cooling, Applying Large Eddy Simulation Approach

    , M.Sc. Thesis Sharif University of Technology Mehrjoo, Amir Reza (Author) ; Taeibi Rahni, Mohamad (Supervisor) ; Ramezanizadeh, Mehdi (Supervisor)
    Abstract
    In the present work, large eddy simulation approach was employed to investigate flows such as backward facing step and internal channel flow, using Smagorinsky and explicit algebraic subgrid-scale models (EASSM) in OpenFOAM software. For this purpose, an explicit algebraic subgrid-scale model was added to OpenFOAM. Coupling pressure and velocity fields were applied to the PISO-SIMPLE (PIMPLE) algorithm. The focus of the present study was to assess various subgrid scale models, in order to predict the behavior of several flows, as well as their extensive numerical study. The results were compared to available experimental data showning that the EASSM results were more accurate than... 

    Thermoplastic starch/ethylene vinyl alcohol/forsterite nanocomposite as a candidate material for bone tissue engineering

    , Article Materials Science and Engineering C ; Volume 69 , 2016 , Pages 301-310 ; 09284931 (ISSN) Mahdieh, Z ; Bagheri, R ; Eslami, M ; Amiri, M ; Shokrgozar, M. A ; Mehrjoo, M ; Sharif University of Technology
    Elsevier Ltd  2016
    Abstract
    Recently, biodegradable polymers such as starch based blends have been well renowned in the biomedical field. Studies have considered them suitable for bone scaffolds, bone cements, tissue engineering scaffolds, drug delivery systems and hydrogels. The aim of this study was to synthesize nanocomposite biomaterial consisting a blend of thermoplastic starch and ethylene vinyl alcohol as the polymer matrix, and nano-structured forsterite as the ceramic reinforcing phase for bone tissue engineering applications. Furthermore, vitamin E was applied as a thermal stabilizer during melt compounding. Extrusion and injection molding were incorporated for melt blending and shaping of samples,... 

    Effect of electrolyte concentration on microstructure and properties of micro arc oxidized hydroxyapatite/titania nanostructured composite

    , Article Materials Science and Engineering C ; Volume 33, Issue 5 , 2013 , Pages 2555-2561 ; 09284931 (ISSN) Abbasi, S ; Golestani Fard, F ; Mirhosseini, S. M. M ; Ziaee, A ; Mehrjoo, M ; Sharif University of Technology
    2013
    Abstract
    Micro arc oxidation was employed to grow TiO2/hydroxyapatite composite layer on titanium substrate. The correlation between electrolyte concentration, diameter and density of the pores in fabricated layers was investigated. Therefore, the effect of electrolyte concentration on composition and morphology of grown layers was studied using SEM, EDX, XRD and XPS techniques. Samples were coated in electrolytes containing 5, 10 and 15 g/l calcium acetate and 1, 3 and 5 g/l β-glycerophosphate, at optimized voltage for 3 min. Pore size variations obey a similar pattern by the addition of both calcium acetate and β-glycerophosphatein various concentrations based on SEM observations. However,... 

    The Impact of Human Capital on Labour Productivity in Manufacturing Sectors of Iran

    , M.Sc. Thesis Sharif University of Technology Narimani, Meysam (Author) ; Sepahvand, Mehrdad (Supervisor)
    Abstract
    This research has been surveyed the impact of intermediate skilled and high skilled human labor force on the productivity of manufacturing sectors by the Nelson & Phelps and also Lucas approaches. first model is related to the level of productivity and the second model is related to the growth of it. We has been prepared the needed statistics from the raw figures of iran statistics center. regression analysis has been done on the basis of panel data model by the use of stata software. the results show that not good efficiency to optimize technology factor of Cobb-Douglas model although it shows higher marginal labor productivity of high skilled human labor force. we has proposed some... 

    Design and Implementation of a Linear, 1 Watt, High Efficiency Power Amplifier with Controllable Output Power for UHF-RFID Application

    , M.Sc. Thesis Sharif University of Technology Sadeghi, Sanaz (Author) ; Sharifbakhtiar, Mehrdad (Supervisor)
    Abstract
    Design and implementation of an efficient, 1 Watt, linear power amplifier (PA) with CMOS technology for UHF-RFID applications is presented in this thesis. Poor quality factor of inductors, high substrate noise and low breakdown voltage of CMOS, makes the implementation of Watt-level PAs challenging on this technology. Also the trade-off between linearity and efficiency, further hardens achieving an efficient high power linear PA. So the literature was reviewed first to come up with the appropriate structure of a linearized efficient PA. Afterwards, the structure was reformed and optimized for the application mentioned above with reasonable stability margins. Baseband relevant blocks were... 

    Design of a Wide Band Power Amplifier for Power DAC

    , M.Sc. Thesis Sharif University of Technology Hassani, Keyvan (Author) ; Sharifbakhtiar, Mehrdad (Supervisor)
    Abstract
    Today’s radio transmitters must be able to send information in several standards. One problem involved in these wide band electronic systems lies in its end part, ie power amplifier. To have a broad band width either switching must be made among several power amplifiers with narrow band width (tuned) or the transistor part of power amplifier must be the same and single and selection be made only among matching networks. In this thesis, a power amplifier with broad band width without requiring a matching network has been designed and laid out. Also considering the low breakdown voltage of the gate oxide of the today’s standard CMOS transistors, it is very difficult to get a high output power... 

    Optimal Design of Permanent Magnet Vernier Generator for Wind Power Plants Application

    , M.Sc. Thesis Sharif University of Technology Esmailoghli, Habib (Author) ; Boroushaki, Mehrdad (Supervisor)
    Abstract
    In recent decades, renewable energy resources (especially wind power as the fastest-growing energy source) have increasingly been employed for providing electrical energy all over the world given to the rising energy demands, reduction in non-renewable fossil fuels as well as severe restrictions applied to the utilization of these fuels because of their contribution in environmental pollution, generating greenhouse gas emissions, and consequently earth warming. The main factors in the development of wind energy systems to date are the easy access to this energy source in all seasons and its cost-effectiveness compared to other counterparts. One of the key components utilized for converting...