Sharif Digital Repository

The series structure of semiconductor devices has a wide application in the industry and research field. The most critical issue in the series structure of series switches is the safe operating condition provision. Hence many kinds of research have been intensively focused on this topic to overcome this necessity. However, many existing aspects relevant to the series stacking of the semiconductor switches have not been pointed out. These include, the power loss must be accepted for the series devices and recovery of this power, providing balanced voltage for the series devices through a simple and easy implementing structure and providing a safe voltage condition for the series devices under... 

Pulse forming networks (PFN) simulating an open ended transmission line, are very favorable in high energy long pulses generation, because of some benefits such as limited energy storage. However, PFN drawbacks, which are low output pulse quality and constant pulse width, limit their applications. Another limitation of generating rectangle pulses using PFN is that, half of the charged voltage appears in the output when delivering the entire energy to a matched load. In this project a new structure of PFN is presented that overcomes these limitations. For continuous pulse width adjusting, three simple schemes are proposed. By increasing load magnitude, amplitude of output pulse voltage... 

In this thesis, firstly we have developed a coupled dynamic for the orbit and attitude of a solar sail. Secondly, we found an optimal trajectory from the Earth to Mars and tried to control the system on the optimal trajectory by a control mechanis which moves the center of mass of the sail. The solar sail is considered to be rigid and Ideally reflective which means the sail reflects the full extent of the photons it receives. Adjusting the center of mass of the sail is done by changing the position of two sliding masses rode on two rails perpendicular to each other. Moving the center of mass of the sail brings about a change in the attitude of the sail which then causes a deflection in the... 

Five-Level Active-Neutral-Point -Clamped (5L-ANPC) converter is used for medium-voltage and high-power applications. In many of these applications, availability and robustness against fault are the most important issues. On the other hand, this converter is made of a large number of power semiconductor switches, diodes and capacitors which could increase the failure probability. Thus, fault detection of power circuit elements is necessary for fault tolerant operation of the converter. In this thesis, following an introduction to the topology and operation principles of Five-Level Active Neutral point clamped converter, a novel open-circuit fault detection and localization method is... 

There are several methods for measuring thin film thickness, however, for the analysis of liquid film motors [1] we need a method which is capable of measuring the thickness using a single image of the film. In this work, we use the colors that appear on thin films, such as soup bubbles, which is a result of light interference to calculate the thickness of the layer  

One of the most elusive problems in quantum mechanics is the transition between classical and quantum physics. This problem can be traced back to the Schrodinger's cat. A key element that lies at the center of this problem is the lack of a clear understanding and characterization of macroscopic quantum states. Our understanding of Macroscopic Quantumness relies on states such as the Greenberger-Horne-Zeilinger(GHZ) or the NOON state. Here we take a first principle approach to this problem. We start from coherence as the key quantity that captures the notion of quantumness and demand the quantumness to be collective and macroscopic. To this end, we introduce macroscopic coherence which is the... 

With confidence in the recorded observations, the RLS method no longer estimates the recorded measurements by sensors, i.e. the displacement and speed of the floors, and only estimates the parameters. In contrast, in the EKF method, in addition to estimating the structure's parameters, a more precise estimation of the observations recorded by the sensors has been done by accepting the noise in the recorded observations. These methods, which are based on the Bayesian updating, investigate the two primary sources of uncertainty in a problem: a) measurement noise or observation noise, and b) process noise, which includes modeling errors. In these methodologies, the unknown system parameters,... 

In recent years, application of nanotechnology in medicine is growing rapidly, specially, in the area of drug delivery. One of most import applications of nanotechnology is the using of nanoparticles as a carrier in targeted drug delivery systems. Simulation of drug delivery and prediction of drug release are developing in experimental and industrial areas. Mathematical modeling is used in drug delivery systems because they are time and cost saving and also can be used to predict drug behavior. The aim of this research, is to provide a framework for designing nano drug carriers. To this end, uptake of nanoparticles into different types of cells with different characteristics, in different... 

Entanglement is one of the key resources of quantum information science which makes identification of entangled states essential to a wide range of quantum technologies and phenomena.This problem is however both computationally and experimentally challenging.Here we use autoencoder neural networks to find semi-optimal measurements for detection of entangled states. We show that it is possible to find high-performance entanglement detectors with as few as three measurements. Also, with the complete information of the state, we develop a neural network that can identify all two-qubits entangled states almost perfectly.This result paves the way for automatic development of efficient... 

The vortex tube is a simple device that injects compressed gas (air) tangentially into the vortex chamber through one or more injection nozzles. After entering, the flow becomes rotational and an axial cold flow goes towards the cold outlet and a peripheral hot flow goes towards the hot outlet. Besides all the different applications of the vortex tube, the main application of this device is cooling. Here, the goal is to optimize the geometry and physical conditions to improve the performance, which is done by using a commercial software and numerical analysis of a vortex tube to understand the flow physics and optimization. In this research, we use experimental and numerical data for... 

Increasing in social communication via electronic ways has been made social network analysis of these communications more important each day. One of the most important aspects in social network analysis is community detection in such networks. There are many different ways to extract communities from social graph structure which in some of them the content of communication between actors has been noticed in community extraction algorithm. In this thesis after a short survey over advantages and disadvantages of existing methods for community detection, a new method for extracting communities from social networks has been suggested which in addition to streaming property of data it spot the... 

Quantum Information Processing (QIP) is one of the active areas of research in both theoretical and experimental physics. Any experimental technique that is used for a scalable implementation of QIP must satisfy DiVincenzo’s criteria [17]. Nuclear Magnetic Resonance (NMR) satisfies many of these conditions, but it is not scalable and cannot initialize the qubits to pure state [28]. NMR can be a great platform for studying the fundamentals of QIP. In this project, for a two­qubit system, we prepare pseudo pure states from the initial mixed states by using unitary operations and implement CNOT gates. According to the results of our experiments, we can apply all the gates with high fidelity....