Sharif Digital Repository

In this research, the numerical simulation of liquid jet ejecting for a series of elliptical orifices into gaseous phase with different aspect ratios, at Rayleigh flow regime and in a range of Weber numbers has been performed.
For simulations, the OpenFoam software was utilized, which its multiphase flow simulation solvers are based on volume of fluid (VOF) method. In order to achieve the most accurate results for axis-switching phenomenon and jet breakup length, the dynamic mesh refinement was used for all the examined cases. The results, which were validated with recent experimental and numerical works, indicate that jet breakup length raises by increasing Weber number from 20 to 300.... 

Present work focuses on the influence of Heteroatom(s) on the bacisity of specific group of amines through the intramolecular hydrogen bonding. This group includes Aza-Crown Ethers specifically. We used Spartan and Gaussian packages to gain optimized structures for all compounds in order to explore the influence of the intramolecular hydrogen bonding on the bacisity of amines. All the gas phase optimizations and energy calculations were performed at the DFT/B3LYP/6-311++G(d,p) level of theory. The Hf/6-31+G(d,p) level was used for all single point calculations in the solution phase. As commonly used solvents in organic and biological reactions, the solution phase calculations were carried... 

Today, the importance of growth and its relation with the survival of the organization is well-known by all managers. However, path selection in this area seems extremely vague and difficult. The present theoretical research, conducted to help further clarify growth dimension characteristics, aims at considering possible growth paths for firms as well as examining required capabilities for each path. In this research, firm growth was studied from three different angles: value chain, product system complexity and the market. A relatively comprehensive categorization was made of organizational capabilities namely technological, managerial and networking and it was examined within dynamic and... 

Time delay generates exponential transcendental terms in characteristic equations. Subsequently, the applied methods are narrow to assess the stability map of delayed fractional-order systems with vanishing fractions. In this case, it is convenient to approximate these equations with its integer-order counterparts to design controllers or investigating features of the systems. But, delay can cause enormous differences between characteristic of these two equations. This study offers a method to survey analytically the stability of fractional-order time delayed linear time invariant systems with infinitesimal fractions. In this method, equations are transferred to an explicit expression which... 

In this project, conceptual and detailed designs of a knee prosthesis constraint testing machine were performed based on ASTM F1223-20 standard. Conceptual and detailed mechanical and electrical design of machine and parts were performed based on common engineering practice and standards. Parts were carefully manufactured and controlled for quality assurance. The machine was then assembled and checked for proof of performance. A plc program was written as machine software. A comprehensive user interface was coded on computer for performing various tests, which can command the machine and view the required data in a graphical environment. Finally, simple experiments were designed and... 

Direct metal deposition (DMD) process is an additive manufacturing technology that is rapidly gaining laser importance due to its various capabilities in applications such as coating, repairing high-value damaged parts, rapid prototyping and even production in small quantities. Among the equipment needed for this process, nozzle is perhaps the most important component because its performance affect the efficiency of powders trapped in the molten pool, and is crucial to the quality of the deposited layer. The existing nozzle designs can be categorized in two groups; lateral and coaxial nozzles; and the coaxial ones are divided into continuous and discontinuous types. Coaxial nozzles have... 

The main purpose of this thesis is to propose effective meta-heuristic algorithms for solving the scheduling problems. We consider the problems that are associated with two areas: project scheduling and shop scheduling. In project scheduling area, only the resource constrained project scheduling problem (RCPSP) is considered. For solving this problem, a hybrid particle swarm optimization (PSO) algorithm is developed. The proposed algorithm outperforms other existing PSO algorithms for the problem. However, most of the contributions of this thesis are related to the second area. The shop scheduling problems of concern include: job shop, stage shop and partial job shop. We developed two... 

In this thesis, a heterogeneous nanocatalyst based on graphene oxide was synthesized. To improve the graphene oxide, it was reacted with paraaminobenzoic acid and then metal salts (cobalt and manganese) were coated on it. The structure of the catalyst was confirmed by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), quantitative X-ray diffraction (EDS) and infrared (FT-IR) spectroscopy. Finally, the catalytic properties of the catalysts were evaluated in the oxidation reaction of different alcohols in the presence of oxygen. In the presence of benzyl alcohols with lethal electron groups, the oxidation conditions are stricter and the reaction efficiency is lower.... 

Resolvers, due to their robust structure, are widely used in automation systems. Among the types of resolvers, the accuracy of the Wound Rotor (WR) resolver in the occurrence of common mechanical errors is higher than other types of resolvers. therefore, in this thesis, an AFWRR is studied to improve the performance. Increasing the number of poles in WR resolvers is a good solution for increasing the accuracy of these electromagnetic position sensors. However, high-speed WR resolvers due to employing fractional slot windings suffer from rich sub-harmonics in the induced voltages. A common solution for suppressing the undesirable sub-harmonics is using multi-layer winding with appropriate... 

Battery thermal management system is the indispensable part of the electric vehicles working with Lithium-ion batteries. Accordingly, Lithium-ion batteries modelling, battery heat generation and thermal management is the main focus of researchers and car manufacturers. While Computational Fluid Dynamics (CFD) has been used quite successfully for battery thermal management, CFD models can be too large and too slow for assembling in battery pack level models or vehicle models. In this research a much smaller reduced order model is developed, which is in the core is based on CFD models. Thus, without losing the accuracy, this model can be implemented in the vehicle model. The developed model... 

Power system operators are facing with imperative challenges to integrate high penetration of renewable power plants. The main challenge is required investment cost for accommodating the grid with uncertainties of renewable resources. In addition, intermittency and fluctuations of renewable resources are another challenges of system operators. Therefore, choosing a proper control procedure to respond the grid disturbances is a crucial task. However, the strategic behaviours of generation companies lead to a competition between them which affects the control performance. In this thesis, an integrated mechanism is proposed that consider both dynamic and strategic behaviours of generation... 

In recent years, techniques in articial intelligence have become an important tool in the analysis of physiological signals. While the application of machine learning techniques has proved useful in other elds, researchers have had difficulty proving its utility for the analysis of physiological signals. A major challenge in applying such techniques to the analysis of physiological signals is dealing effectively with inter-patient differences. The morphology and interpretation of physiological signals can vary dep ending on the patient. This poses a problem, since statistical learning techniques aim to estimate the underlying system that produced the data. If the system (or patient) changes... 

Heat pipe is a heat transfer device that may have a thermal conductance hundreds of times higher than that of copper. Currently, heat pipes have been used in numerous applications including satellite thermal management, energy systems for energy recovery and energy conversion, and electronics cooling, particularly in laptop and desktop computers. In this thesis, a new application of the heat pipe in an automotive engine is introduced. In this application, heat pipes are incorporated into the radiator of the automotive engine for more efficient heat transfer. In particular, the employment of the heat pipes would allow the gravity to be used as the driving force for the liquid... 

Permanent Magnet Synchronous Motors (PMSMs) are more conventional and widely employed in Electric Vehicles (EVs) applications. The rotor position performed an essential role through PMSMs drive; therefore, any deviation in the detected position will be evaded in coordinate transformations, originating from external or inherence sources. Subsequently, the discussed faults will be conducted to three-phase currents and output torque through erroneous transformations. Resolver’s estimated rotor position due to fault occurrence will be defined as aggregating ideal and non-ideal components. Moreover, based on inherence periodic in resolvers’ principle, non-ideal components could be written by the... 

Optical Coherence Tomography (OCT) has a great potential to elicit clinically useful information from tissues due to its high axial and transversal resolution. In practice, an OCT setup cannot reach to its theoretical resolution due to imperfections of its components, which make its images blurry. The blurriness is different alongside regions of image, thus they cannot be modeled by a unique point spread function (PSF). In this paper, we investigate the use of solid phantoms to estimate the PSF of each sub-region of imaging system. We then utilize Lucy-Richardson, steepest descent (SD) and total variation (TV) based iterative deconvolution methods for mitigating occurred spatially variant... 

One of the main and challenging stages in the development of hybrid vehicles (HEVs) is the conceptual design of its powertrain, which includes two parts: architecture design and sizing. This research aims to introduce a novel framework for conceptual design of HEV powertrains. By using this framework, not only the sizing of components is optimized but also the optimal architecture of powertrain is selected. In the proposed framework, by finding the optimal values of the powertrain design variables, including type of architecture and sizing variables (such as nominal powers, nominal torques, conversion ratios, etc.), the performance and the cost of hybrid vehicle is optimized in three layers... 

In this thesis, we have tried to study one of the most well known collective behavior phenomena known as the Wisdom of the crowd, from the perspective of statistical physics. In recent decades with the appearance of Social Networks and mass media, collective social phenomena have become a critical topic in the life of every human being. In the Wisdom of crowd phenomenon, the overall process is to ask the crowd’s opinion regarding a special topic and after aggregating the predicted values, the aggregated quantity is declared as the wisdom of the crowd. It has been observed that in some polls and elections, the result of the wisdom of crowd outperforms every individual of the group and in some... 

The hulls of various ships are exposed to the problem of biofoulings on the hull after a period of time due to use in the salt water environment of the sea and the existence of suitable conditions for the growth of marine plants, so that the ship after about one month of stopping in the port, in order to start the activity again, it is necessary to clean the hull from these biofoulings. The ship will be transported to the dry dock for cleaning only when it is heavily involved in biofoulings on the hull, and in the meantime, it must be periodically cleaned in water by other systems, including the diver and robotic systems.Using a robotic system to perform this operation has various... 

The current gold standard for clinical diagnosis of melanoma is excisional biopsy and histopathologic analysis. Approximately 15–30 benign lesions are biopsied to diagnose each melanoma. In addition, biopsies are invasive and result in pain, anxiety, scarring, and disfigurement of patients, which can add additional burden to the health care system. Among several imaging techniques developed to enhance melanoma diagnosis, optical coherence tomography (OCT), with its highresolution and intermediate penetration depth, can potentially provide required diagnostic information noninvasively.
an image analysis algorithm, "optical radiomic melanoma detection (ORMD)" has been presented which...