Sharif Digital Repository

In this article, we consider a secure multi-party computation problem (MPC), where the goal is to offload the computation of an arbitrary polynomial function of some massive private matrices (inputs) to a cluster of workers. The workers are not reliable. Some of them may collude to gain information about the input data (semi-honest workers). The system is initialized by sharing a (randomized) function of each input matrix to each server. Since the input matrices are massive, each share's size is assumed to be at most 1/k fraction of the input matrix, for some k ∈ N. The objective is to minimize the number of workers needed to perform the computation task correctly, such that even if an... 

In this paper, we introduce limited-sharing multiparty computation; in which there is a network of workers (processors) and a set of sources, each having access to a massive matrix as a private input. These sources aim to offload the task of computing a polynomial function of the matrices to the workers, while preserving the privacy of data. We also assume that the load of the link between each source and each worker is upper bounded by a fraction of each input matrix for some cin{1, rac{1}{2},rac{1}{3}, ldots}. The objective is to minimize the number of workers needed to perform the computation, such that even if an arbitrary subset of t-1 workers, for some tin mathbb{N}, collude, they... 

In this article, we consider a secure multi-party computation problem (MPC), where the goal is to offload the computation of an arbitrary polynomial function of some massive private matrices (inputs) to a cluster of workers. The workers are not reliable. Some of them may collude to gain information about the input data (semi-honest workers). The system is initialized by sharing a (randomized) function of each input matrix to each server. Since the input matrices are massive, each share's size is assumed to be at most 1/k fraction of the input matrix, for some k ∈ N. The objective is to minimize the number of workers needed to perform the computation task correctly, such that even if an... 

Macroporous styrene-divinylbenzene copolymers with different degree of crosslinking were prepared by suspension polymerization in presence of different binary mixtures of toluene and heptane, as diluent. Specific surface area, bulk and apparent densities, and pore volume of the resulting beads were determined experimentally. Applying the least square method to the experimental data, correlations for prediction of these properties were obtained. Effects of divinylbenzene concentration, diluent to comonomer volume ratio, and composition of the diluent mixture were considered in developing the aforementioned correlations. The influence of the reaction recipe on porous structure of the samples... 

In a secure multiparty computation (MPC) system, there are some sources, where each one has access to a private input. The sources want to offload the computation of a polynomial function of the inputs to some processing nodes or workers. The processors are unreliable, i.e., a limited number of them may collude to gain information about the inputs. The objective is to minimize the number of required workers to calculate the polynomial, while the colluding workers gain no information about inputs. In this paper, we assume that the inputs are massive matrices, while the workers have the limited computation and storage at each worker. As proxy for that, we assume the link between each source... 

Anxiety is among the most debilitating nonmotor symptoms of Parkinson's disease (PD). This study aimed to determine how PD patients with low and high levels of anxiety (LA-PD and HA-PD, respectively) compare with age- and sex-matched controls at the level of motor control of reach-to-grasp movements during single- and dual-task conditions with varying complexity. Reach-to-grasp movement kinematics were assessed in 20 LA-PD, 20 HA-PD, and 20 sex- and age-matched healthy controls under single- as well as easy and difficult dual-task conditions. Assessment of PD patients was performed during both the on- and off-drug phases. The results obtained during dual-task conditions reveal deficits in... 

According to Arthur (2006, p. 200), “Through the use of literature, a language learning experience might become at the same time a source of immediate pleasure and satisfaction for the student. This possibility makes literature an appealing teaching device for ESL teachers”. However, numerous factors may contribute to the teachers’ lack of interest in using literary texts as a teaching tool. This study was an attempt to investigate Iranian EFL teachers’ attitude toward using literature in language classes and their perception toward the probable reasons of some teachers’ lack of interest in doing so. Altogether forty-four language teachers (19 females and 25 males, with a mean age of 26)... 

In this study, the inclusion of multi-walled carbon nanotubes as the second phase in the hydroxyapatite matrix, in order to improve the mechanical strength, has been performed via the sol-gel process. The stability of carbon nanotube sol with the changes of pH and dispersant values (sodium dodecyl sulfate) was evaluated by zeta potential analysis. The results indicated that synthesis of hydroxyapatite particles in the presence of the carbon nanotubes had the best result in homogenization of the carbon nanotube dispersion and faster crystallization of hydroxyapatite. The crystallization of hydroxyapatite phase was investigated with differential scanning calorimetry (DSC) and X-ray diffraction... 

The unwanted effects of diffraction and defocus aberration in three-dimensional integral imaging are taken into account by using the Fourier optics approach. The concepts of point spread function and optical transfer function widely in use for conventional two-dimensional imaging are generalized and applied to three-dimensional integral imaging systems. The effects of diffraction and defocus aberration are then studied and the performance of the conventional single lens imaging system is compared against that of the integral imaging  

High temperature shape memory NiTiHf thin films with varying hafnium contents up to 28.7 at.% were fabricated by DC magnetron sputtering using simultaneous sputter deposition from separate elemental targets. The required film composition was achieved by adjusting the power ratio to the targets. The as-deposited films were amorphous; a post deposition annealing was performed at 550 °C to crystallize the films. Two-micron thick films were characterized by energy dispersive spectroscopy in a scanning electron microscope, temperature controlled X-ray diffraction, differential scanning calorimetry, and atomic force microscopy. The results showed that above 10 at.% Hf additions the transformation... 

Ramsar, in the north of Iran by the Caspian Sea, has been known for the highest natural radiation background on Earth due to the local geology and hydrogeology. The residents and visitors use the hot springs that distribute the natural radionuclides especially 226Ra and its decay products in the areas. Many studies have been undertaken to measure the absorbed dose rate in Ramsar's air, however, no survey has been done to assess public internal exposure from ingestion of natural radionuclides, such as, a broad survey for 226Ra was conducted in foodstuffs and drinking water. This study presents the results of public annual activity intake (Bq) and effective dose (μSv) from ingestion of 226Ra... 

In recent years, subsidy payment has been made a main challenge for governments due to growth of population and energy price in global markets. Targeted subsidy plan has been implemented in Iran since last year, and this article discusses its effects on costs and revenues of Tehran Electricity Company as one of the major subdivisions of Iran's electricity industry. In the new system, structural changes have been made in electricity tariffs, so it is not possible to predict the future trends in electricity consumption only based on the past consumptions. In order to model the decision making structure in the recent conditions, a system dynamics method is applied. In addition to modeling the... 

Understanding the nature of interaction between metal nanoparticles and biomolecules such as amino acids is important in the development and design of biosensors. In this paper, binding of M3 clusters (M = Au, Ag and Cu) with neutral and anionic forms of histidine amino acid was studied using density functional theory (DFT-B3LYP). It was found that the interaction of histidine with M3 clusters is governed by two major bonding factors: (a) the anchoring N-M and O-M bonds and (b) the nonconventional N-H⋯M and O-H⋯M hydrogen bonds. The nature of these chemical bonds has been investigated based on quantum theory of atoms in molecules (QTAIM) and natural bond orbital (NBO) analyses. In the next... 

The relative stabilities and noncovalent interactions of the six low-lying energy tautomers of cytosine nucleobase with some biological anions (such as F-, Cl-, and CN-) have been investigated in gas phase by density functional theory (DFT) method in conjunction with 6-311++G (d,p) atomic basis set. Furthermore, to systematically investigate all possible tautomerisms from cytosine induced by proton transfer, we describe a study of structural tautomer interconversion in the gas phase and in a continuum solvent using DFT calculation. We carried out geometrical optimizations with the integral equation formalism of polarizable continuum (IEF-PCM) model to account for the solvent effect, and the... 

Understanding the nature of the interaction between metal nanoparticles and biomolecules has been important in the development and design of sensors. In this paper, structural, electronic, and bonding properties of the neutral and anionic forms of glutathione tripeptide (GSH) complexes with a Au 3 cluster were studied using the DFT-B3LYP with 6-31+G**-LANL2DZ mixed basis set. Binding of glutathione with the gold cluster is governed by two different kinds of interactions: Auâ€"X (X = N, O, and S) anchoring bond and Au··•·•H-X nonconventional hydrogen bonding. The influence of the intramolecular hydrogen bonding of glutathione on the interaction of this peptide with the gold cluster has been... 

As digital technology has developed, relays have evolved from simple electro-mechanical devices into robust microprocessor-embedded intelligent electronic devices (IEDs). Distance protection, one of the most important and sophisticated forms of substation protection, quickly and selectively detects and clears phase faults in sub-transmission and transmission lines. The installation of a substation automation system (SAS) involves implementing control, monitoring, and protection logic by programming the IEDs and providing an appropriate communication network. IEC61850 has gradually satisfied the need for a standard communication protocol so that IEDs from different manufacturers can... 

The first asymmetric synthesis of α,β-disubstituted γ-phosphono sulfonates is reported. The key step is the Michael addition of a lithiated enantiopure sulfonate bearing an inexpensive chiral sugar auxiliary to α,β-unsaturated phosphonates in good diastereoselectivities. After chromatographic purification, the cleavage of the chiral sugar auxiliary proceeds without any epimerization or racemization to form the corresponding isopropyl sulfonate in very good overall yield (75%) and excellent diastereomeric and enantiomeric excess (de, ee ≥ 95%). © 2009 Elsevier Ltd. All rights reserved  

In this study, UV‐Vis-NIR photodetectors based on decorated ZnO nanofibers (NFs) with optimized coverage of Au nanoparticles (NPs) fabricated via combined simple electrospinning and sputtering techniques are introduced. The effect of different coverages of Au NPs resulted from different Au nominal layer thicknesses on the morphology and optical properties of the ZnO fibers are investigated through various characterization methods. It is discovered that 4 nm Au nominal thickness provides the highest UV on/off ratio (~460), responsivity (~332 A/W), detectivity (~2.93×10 11 Jones) as well as faster rise and decay times as compared to pure ZnO nanofibers. A broad spectral response from UV to NIR...