Sharif Digital Repository

Depending on the geometry and nozzle pressure, increasing the ratio of the diffuser inlet area to the nozzle outlet area can lead to instability in the high-altitude simulator vacuum chamber startup process. This instability results in the formation of harmonic pressure oscillations throughout the diffuser and the vacuum chamber. In this study, a scaled down second throat diffuser with compressed air has been utilized. The performance of the diffuser has been investigated using four conical nozzles with different expansion ratios to simulate instability at area ratios of 1.27, 1.91, 4.1, and 7.81 with rapid nozzle pressure rise. Experiments were conducted by measuring wall pressures along... 

Cryptocurrencies are not only regarded as a trustworthy method of financial transaction validated by a decentralized cryptographic system as opposed to a centralized authority, but also as one of the most popular and lucrative forms of trade and investing. Predicting the price of a cryptocurrency is a challenging topic in time-series research. Its intricacy is due to the volatility and large swings of cryptocurrencies' price. The emergence of brand-new cryptocurrencies, which might present a profitable trading opportunity but lack sufficient historical data for technical analysis, prompted us to develop a trading strategy that could be applied universally. The forecast of the next timestep's... 

Evaporation and condensation of thin films can rupture or stabilize thin film .We show that evaporation hastens dewetting of a thin film. Dewetting over nanometric downward step causes pinning of the contact line near the step. This phenomena is not permanent and after certain time that contact angle reaches to its critical value depinnnig happens. We also study the effect of the step size, contact angle, film thickness, slip and evaporation on the depinning time of the contact line. We show that depinnig time has a reverse relation with the rate of evaporation  

For decades Crystal Oscillators (XO) have been the unequaled references for stable and low noise frequency sources. This leadership is due to their high Q-factor. The resonant frequency of such crystal resonator is inversely proportional to the thickness of the quartz disk (the resonant cavity) and is today limited , by physical manufacturing constraints , to about 150 MHz . in order to avoid such limitation , the solution is to start with an oscillator at higher fundamental frequency. SAW technology on quartz offers this opportunity . with SAW the resonant cavity size is not linked to the thickness of the substrate and resonant frequencies up to the GHz range are achievable. In this thesis... 

Power amplifiers (PAs) are one of the key components in radio-frequency (RF) and microwave systems. In these systems, PAs must be highly efficient to simplify the thermal management and to enhance dc power requirements. Future systems, including WiMax, 4G, 5G, and beyond, will likely require larger bandwidths due to their wider spectral allocations caused by the extended bandwidth of baseband signals. Therefore, highly-efficient and broadband PAs are needed to be employed in these systems. To realize high-efficiencies over wide frequency ranges, class-J mode of operation was introduced by Cripps in 2009. Class-J mode of operation is capable of maintaining a high efficiency (78% in theory)... 

Evaluation of the seismic-induced settlement of an unsaturated soil layer depends on several variables, among which the small strain shear modulus, Gmax, and soil’s state of stress have been demonstrated to be of particular significance. Recent interpretation of trends in Gmax revealed considerable effects of the degree of saturation and hydraulic hysteresis on the shear stiffness of soils in unsaturated states. Accordingly, the soil layer is expected to experience different settlement behaviors depending on the soil saturation and seasonal weathering conditions. In this study, a semi-empirical formulation was adapted to extend an existing Gmax model to infer hysteretic effects along... 

Modern broadband microwave and millimeter-wave systems often struggle with excessive pass band ripple and negative gain slopes due to the loss of transmission lines such as coaxial cables, or ripples in the gain characteristic of broadband amplifiers. The common solution for this problem is using a gain equalizer to compensate for the intrinsic pass band variation with some extra loss in the band of interest in return.Designed equalizers often have a constant slope in their bandwidth. However, having ripples in pass band or in other words slope changing in some parts of the band is one of the issues that designers should deal with. In this thesis, after reviewing the previous works on the... 

The development of innovation ecosystems has become a global trend. These ecosystems have proven their importance to governments by having a significant impact on the creation of technology companies and the economic growth of the country. In Iran, too, for many years, efforts have been made under various headings to develop the innovation ecosystems. In this dissertation, based on the narrative policy framework, the existing policy narratives of innovation ecosystems development policy in iran between 2013-20 years in the case of startup ecosystem have been analyzed. After analyzing these data, it was found that the three main narratives of catch-up, wealth creation and infiltration, have... 

Wideband mm-wave radars are gaining popularity in automotive applications due to their superiority in harsh weather conditions, high distance resolution, precise velocity measurement, and superior spatial resolution. The primary purpose of this thesis is to design and implement a voltage-controlled oscillator for 77GHz automotive radar applications.Phase noise -as one of the most crucial specifications in VCO design- Phase noise improvement techniques as well as harmonic engineering methods are delineated. Also, an Ocean-based code for ISF simulation is introduced and developed to obviate the need for additional signal processing software so that simulation speed increases... 

A drug can be defined as a substance made to prevent disease, cure a specific symptom, relieve pain, and reduce anomalies in the body. The process of drug designing is so laborious, complex, costly, and time-consuming that chance of failure during the lab experiment stages is high. These challenges have persuaded researchers to find new usage for existing drugs, referred to as drug repurposing, with the main advantage of reducing cost, risk, and time. To this aim, computational methods have been applied to discover hidden pharmaceutical capabilities of drugs in terms of predicting whether a particular drug can interact with a particular protein.Graph Neural Networks (GNNs) have recently... 

Wettability is the cause of many interactions today and is definitely effective in almost all processes where liquid and solid phases are in contact. Wetting controls by surface engineering can accelerate the process in the industry or improve the quality of daily life. Therefore, the fabrication of complex surfaces with a specific purpose and different wettability has attracted the attention of researchers. In this thesis, silica nanoparticles were synthesized to create roughness and reduce contact between surfaces and liquids at first. Then, using chemical compounds to reduce the surface energy, a transparent (94.20%) superhydrophobic and oleophobic coating was created on the glass. The... 

In this research we examine the effects of internal corporate governance mechanisms on shareholder value of 247 firms that were accepted in Tehran Stock Exchange. The main focus is on ownership structure and board composition. Owners with different identities affect shareholder value both directly and to some extent indirectly (through affecting board composition). We measured firm value using 2 different measures: relative growth of share price and market to book value of the firm. Controlling for industry effects, considering different levels of competitiveness, we find that private owners affect firm value more positively than governments and so do institutional investors more than... 

Reducing interconnection costs on chip and power consumption are important issues in designing processors. In a processor, a significant amount of total chip power is consumed in the interconnection. The goal of this research is to find a way to reduce power consumption in the interconnection. In this project we propose a new data sending method in which an LZW-like compression algorithm is exploited to compress data before sending it over the interconnection. Then, the codes of the compressed data are sent through the interconnection in order to reduce the number of dynamic cycles. The simulation results show that using this method can reduce 52% of dynamic power consumption  

In this thesis first of all we investigate phase noise and it's generation factors. Then we design and implement an ultra low phase noise oscillator. To do this, an ultra low phase noise oscillator which is tunable in 1-2GHz with 100MHz steps will be designed. The outline of the circuit is as follows: at the first we design a VCO which is ultra low phase noise and mechanically tunable in 1-2GHz by means of rotation of a handle. Then a phase locked loop will be built with the help of an ultra low phase noise OCXO at 100MHz and one SPD1 which generates harmonics of OCXO's output frequency. For the next, design and implementation of a 1.6GHz oscillator with fixed output frequency has been done.... 

The objective of this investigation was obtaining sound Friction Stir Welded (FSWed) Commercially Purity Titanium using suitable Tool’s Materials (for Shoulder and Pin) in order to be able to work in high temperature (>1000 ˚C) with great mechanical properties and minimum wear during process. Consequently, different materials and designs for Tool, such as High Speed Steel tool, Tungsten based tool, Tungsten Carbide (WC-Co) based tool and diverse tool geometry and designs like simple design, threaded design, fixed pin and inserted pin (adjustable pin) was used. The results demonstrated that using simple cylindrical WC-Co for pin and Tungsten for shoulder resulted in joints with the best... 

Due to the inherent non-linear nature of the MR damper, an intelligent non-linear neuro-fuzzy control strategy is designed for control of wave-induced vibration of an offshore steel jacket platform equipped with MR dampers. In the proposed control system, a dynamic-feedback neural network is employed to model non-linear dynamic system and the fuzzy logic controller is used to determine the control forces of MR dampers. Required voltages and actual forces of MR dampers are obtained by use of two feedforward neural networks, in which the first neural network and second one act as the inverse and forward dynamics model of the MR dampers, respectively. The most important characteristic of the... 

In this study, the effect of the Cu interlayer thickness was studied on St52 steel. Specimens with different thickness of the interlayer, were subjected to 1150 °C at different times. Isothermal solidification was completed for the thickness of the 50 μm, 30 μm, and 10 μm in 30, 25 and 20 minutes. Afterwards, homogenizing and dual-phase heat treatment were used for 75 minutes at 730°C. Optical microscopy and SEM were used to analyze the microstructure of the joints. Mechanical properties of the joints, including micro hardness of different parts of the joint and also shear strength of the joint zone were studied. The results show that after homogenizing treatment, microstructure and harness... 

Fuel cell is a power generator like internal combustion engines, but the first point is that internal combustion engines produce mechanical power while fuel cells produce electrical power. Secondly, internal combustion engines use hydrocarbon derivatives such as gas as fuel and their exhaust fumes are toxic gaseous, but fuel cells use hydrogen as fuel and their exhaust are only water in either vapor or liquid form. One of the most important issues in fuel cells is optimum design of micro channels of bipolar plates which is different regarding the type and application of fuel cells. Optimum designing of micro channels on bipolar plates plays a key role in fluid mass transport through micro... 

A geometric network is a weighted undirected graph whose vertices are points in the plane and edge weights are equal to the Euclidean distance of its endpoints. Routing is one of the important problems in graph theory and if the underlying graph is a geometric network,it has applications in different fields including transportation, communication networks and robotics. In many applications the graph data is not accessible or finding the optimal path is costly. Therefore local routing is used. In local routing the goal is that at each vertex,the routing must be done only given the neighbours of the current vertex, the origin and the destination of the route. Geometric spanner is a subgraph of... 

Deployment of demands, increase in users and new services highlight the necessity of effective frequency allocation i.e. dynamic allocation instead of fixed allocation. Cognitive radio is a proper solution for dynamic frequency allocation. Cognitive radio can scan the spectrum and use the idle bands for transmitting and receiving data. The main part of this radio which is responsible for the most pivotal task is spectrum sensing. Recently, varied methods have been proposed to sense the spectrum. The scope of this research is on designing a very high-speed spectrum sensing system. In this thesis, in order to meet the required scan rate, a tunable complex filter with 40MHz pass-band has...