Sharif Digital Repository

In this thesis, we investigate game theoretic approaches for distributed resource allocation in the downlink of cognitive radio networks. As the problem of joint frequency and power allocation in the downlink of cognitive radio networks has not been studied using game theory, this was an incentive for us to pay attention to the downlink and try to propose decentralized and distributed approaches for resource allocation in the downlink of these networks.
The works done in this thesis can be divided into two main parts. In the first part, we study the problem of distributed power allocation in the downlink of cognitive radio networks and using game theory techniques, we propose a... 

The objective of this project is to consider the various methods employed in processing the EMG signal to control an artificial hand. The current presented methods of EMG processing do not benefit from the fact that sequential movements are closely correlated. Using this time correlation we are going to improve the correctness of the prediction of movements. To find the application of this project in commercial artificial hand we focus on one DOF hand for a high level of accuracy. Using this processing method combined with an artificial hand having Geometric Adaptability may present an acceptable product for commercial use.

 

In clinical applications of high intensity focused ultrasound, high amplitude acoustic waves are used to heat and ablate tumors and kidney stones. The high amplitude of ultrasonic waves leads to nonlinear effects within the acoustic filed. Heating stems from the acoustic power absorbed by tissues. The more the acoustic power is absorbed, the more the tissue temperature increases. On the other hand, more absorption means less penetration. Since the wave frequency is one of the important factors in power absorption, a compromise should be reached between the transferred energy and desired penetration depth. In this thesis, first, a problem with common HIFU-therapy conditions is simulated;... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel... 

Optimisation is ubiquitous and essential in almost all areas of engineering and computer science for the design and analysis of efficient systems and algorithms. Indeed, many engineering problems can be cast as optimisation problems, in which a decision must be made upon certain control parameters in order to maximise revenue or minimise an incurred cost in designing a system. Whereas deterministic optimization problems are formulated with known parameters, real-world problems almost invariably include parameters which are unknown at the time a decision is made. Stochastic optimisation is the approach for modelling optimization problems that involve uncertainty, and it has attracted a lot of... 

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

In real-time systems, jobs that miss their deadline are considered worthless or ineffective. Nowadays, real-time applications (such as multimedia) that communicate through software-defined networks (SDN) are widely used and will continue to expand in the future. SDN is an emerging network architecture in which control plane is separated from data plane to manage it directly. In this research, we make changes to the controller and the switch used in such network to deliver real time packets or real-time flows (such as video) on time, as much as possible. As missed deadline packets are worthless and they waste bandwidth, dropping them is a solution. Moreover, the controller can drop flows that... 

The increasing number of road accidents and fatalities have yielded the introduction of several solutions by related industries such as automobile manufacture. Proposed solutions can be classified into two categories: passive, such as airbags, and active such as ABS ad ITS-based technologies. Inter vehicles communication let the communication between vehicles(V2V) or between vehicles and road infrastructure (V2I) by relying on DSRC technology and standards. Intelligent Transportation System (ITS) has three main types of applications namely safety, traffic and commercial. Safety applications are the main goal of vehicular communication, and real time guarantee in safety applications is so... 

Nowadays, one of the problems of network designers and users is the correctness of network equipment functionality. Since routers play an important role in information transfer between various networks and communicate with each other through a routing protocol, any violation of such protocol can result in the network's failure or defective transfer of data. Thus, being assured of the conformance of the implemented protocol in a router with what has been defined in the protocol's standard is of great significance. To this end, before using or exposing a router, network equipment testers should run protocol conformance tests on it and insure its correct functionality. This brings up the... 

In order to increase the network performance, to discover network security threats, to guarantee the quality of services, to simulate networks and develop new network protocols, network designers and operators need software tools to analyze the network traffic. The first step to do this analysis is network monitoring. This can be done by using various software and hardware tools.
In this research we developed a tool which analyzes the network traffic using appropriate statistical methods. The models which are analyzed in this application are: Poisson, Self-similar and Weibull. This application analyzes the network traffic based on this statistical models and calculates their parameters.... 

Network Function Virtualization (NFV) is a new paradigm in computer networks for implementing network functions on general-purpose common-of-the-shelf processors. The revolutionized NFV architecture has shown to be a suitable replacement for hardware middleboxes. NFV is in high demand because of its lower costs, increased flexibility, and more scalability. However, the ever-growing volume of network traffic and increased data transfer speed in computer networks have made achieving high performance the major issue in this area. With thousands of processing cores and high memory bandwidth, Graphical Processing Units (GPUs) are potentially an appropriate solution to accelerate network... 

Recent advancement in wireless communications, electronics, low power design and also tendency to use high performance low cost products have led to emergence of Wireless Sensor Networks (WSNs). As the main purpose of a WSN is information gathering and it’s transmission to the sink node, the main problem is to deliver information correctly with minimum energy consumption. Besides, whereas the majority of developed applications for WSNs are event-critical applications, achieving reliable data transfer as the main factor of dependability and quality of service seems vital. However, data transmission is unreliable over multi-hop WSN due to the unreliability of wireless links and node failures. ... 

In this research, Friction stir welding (FSW) of 7075-O and 7075-T6 aluminum alloys was performed to investigate the effects of the base material conditions, effects of process parameters on the FSW characteristics and optimum parameters which lead to best mechanical properties of joints. The experimental results indicated that the base material condition has a significant effect on weld morphologies, weld defects, and mechanical properties of joints. The optimum parameters were 1230 rpm and 60 mm/min for 7075-O and 1230 rpm and 100mm/min for 7075-T6. Also, Double welded friction stir welding of 7075 aluminum alloy was performed to investigate the effects of the second pass of weld on the... 

Wireless sensor networks (WSNs) are tiny devices with limited computation and power supply. For such devices, data transmission is a very energy-consuming operation. Data aggregation eliminates redundancy and minimizes the number of transmissions in order to save energy. This research explores the efficiency of data aggregation by focusing on different aspects of the problem such as energy efficiency, latency and accuracy. To achieve this goal, we first investigate data aggregation efficiency with constraint on delay, which can be compatible with other important system properties such as energy consumption and accuracy. By simulation, we will show that, depending on the application, we can...