Sharif Digital Repository

In this study, the behavior of gavoshan dam was evaluated during construction and the first impounding. A two-dimensional (2D) numerical analysis was conducted based on a finite difference method on the largest cross-section of the dam using the results of instrument measurements and back analysis. These evaluations will be completed in the case that back analysis is carried out in order to control the degree of the accuracy and the level of confidence of the measured behavior since each of the measurements could be controlled by comparing it to the result obtained from the numerical model. Following that, by comparing the results of the numerical analysis with the measured values, it is... 

This paper points out an application of the "two-echelon single-period product (newsboy) problem," in which within a limited budget the final product and the raw materials are purchased before the start of the selling period and depending on the demand, the raw materials may be transformed into the finished product during the period. The objective of this problem is to find the order quantities of both the raw materials and the final product at the beginning of the period such that the expected profit is maximized. A new model is first developed for this problem and then a Lagrangian method is proposed to solve it. Finally, a numerical example is given to illustrate the application of the... 

Fiber/matrix debonding at the free surface of unidirectional composites deteriorates their performance and ultimately reduces the working life of these materials. Identifying the source, controlling the propagation and elimination of the damages has been the subject of many research attempts. The results show that the singular radial thermal residual stress at the fiber/matrix interface on the free surface of composites is the main reason for initiation of the debonding. Also, it has been experimentally and numerically proven that a thin layer of matrix-like cover on the free surface could highly help in elimination and/or reduction of the damage. However, the results were limited to the... 

In this study the bioleaching of a low-grade uranium ore containing 480 ppm uranium has been reported. The studies involved extraction of uranium using Acidithiobacillus ferrooxidans derived from the uranium mine samples. The maximum specific growth rate (μ max) and doubling time (t d) were obtained 0.08 h-1 and 8.66 h, respectively. Parameters such as Fe2+ concentration, particle size, temperature and pH were optimized. The effect of pulp density (PD) was also studied. Maximum uranium bio-dissolution of 100 ± 5 % was achieved under the conditions of pH 2.0, 5 % PD and 35 °C in 48 h with the particles of d 80 = 100 μm. The optimum concentration of supplementary Fe2+ was dependent to the PD.... 

In this research convective heat transfer coefficient enhancement of nanofluids prepared from high surface area graphene has been investigated in laminar flow in the developing region. The nanofluid has been prepared from nanoporous graphene with high surface area and with concentration of 0.025 to 0.1 wt.%. Deionized water has been used as the base fluid and a type of Ter-Polymer has been utilized as the surfactant. The results indicate that thermal conductivity of nanofluid with concentration of 0.1 wt.% remains quite constant, with only 3.8% enhancement, while convective heat transfer coefficient improves significantly, with 34% enhancement. The behavior of this enhancement related to the... 

Persian handwritten digit recognition has attracted some interests in the research community by introduction of large Hoda dataset. In this paper, the well-known random forest (RF) and convolutional neural network (CNN) algorithms are investigated for Persian handwritten digit recognition on the Hoda dataset. Using the Hoda dataset as a standard testbed, we have performed some experiments with different preprocessing steps, feature types, and baselines. It is then shown that RFs and CNNs perform competitively with the state-of-the-art methods on this dataset, while CNNs being the fastest if appropriate hardware is available  

A Co-Mo/graphene oxide (GO) catalyst has been synthesized for the first time for application in a defined hydrodesulfurization (HDS) process to produce sulfur free naphtha. An intelligent model based upon the neural network technique has then been developed to estimate the total sulfur output of this process. Process operating variables include temperature, pressure, LHSV and H2/feed volume ratio. The three-layer, feed-forward neural network developed consists of five neurons in a hidden layer, trained with Levenberg–Marquardt, back-propagation gradient algorithm. The predicted amount of residual total sulfur is in very good agreement with the corresponding experimental values revealing a... 

In this research effects of important synthesis parameters upon catalytic performance of a novel graphene based catalyst for an HDS reaction were investigated. The graphene oxide (GO) used as a support was initially prepared through chemical exfoliation of graphite via modified Hummers method. In this venue the impregnation method, promoter/main metallic spices ratio, total metal loading of the active phase and amount of chelating agent were systematically understudied. Thus, GO was impregnated with active metallic phases through the hydrothermal and modified incipient wetness impregnation techniques. In both procedures, 1:2, 1:3 and 1:4 weight ratios of Co/Mo with the percentages of the... 

A new multi-objective intermodal hub-location-allocation problem is modeled in this paper in which both the origin and the destination hub facilities are modeled as an M/M/m queuing system. The problem is being formulated as a constrained bi-objective optimization model to minimize the total costs as well as minimizing the total system time. A small-size problem is solved on the GAMS software to validate the accuracy of the proposed model. As the problem becomes strictly NP-hard, an MOIWO algorithm with an efficient chromosome structure and a fuzzy dominance method is proposed to solve large-scale problems. Since there is no benchmark available in the literature, an NSGA-II and an NRGA are... 

This research has investigated the effect of certain geometric parameters on cooling performance of three vortex tubes. The influencing parameters include three length/diameter ratios L/D = 10, 25, 40, three nozzle cases and each case with number n = 2, 4, 6 nozzles, three cold orifice/diameter ratios β = 0.389, 0.5, 0.611 and three inlet pressures Pi = 2, 2.5 and 3 bar. The experiments are conducted based on three factors, two-level and central composite face-centred design with full factorial. The results are analysed according to the principle of response surface methodology. The goodness of fit of the regression model is inspected using the analysis of variance and F-ratio test. The... 

The activity and travel patterns of people with disabilities are generally distinct, as their activities are more dependent on others due to their special physical condition. This paper elaborates on the patterns of regular out-of-home activities (i.e. for different trip purposes) of disabled persons along with the way that they are accompanied to perform the activities. Household Travel Tracker Survey data collected by the Chicago Metropolitan Agency for Planning is used to develop new travel models. Two multinomial logit models are estimated to explore the influential variables and elaborate the consequences of ignoring their inter-dependency. From the influential parameters perspective,... 

This research has investigated the effect of certain geometric parameters on cooling performance of three vortex tubes. The influencing parameters include three length/diameter ratios L/D = 10, 25, 40, three nozzle cases and each case with number n = 2, 4, 6 nozzles, three cold orifice/diameter ratios β = 0.389, 0.5, 0.611 and three inlet pressures Pi = 2, 2.5 and 3 bar. The experiments are conducted based on three factors, two-level and central composite face-centred design with full factorial. The results are analysed according to the principle of response surface methodology. The goodness of fit of the regression model is inspected using the analysis of variance and F-ratio test. The... 

The synthesis of cheap and environmental friendly adsorbent from residual sugarcane bagasse was done for the removal of naphthalene from aqueous solution. The activated carbon dot was obtained by KOH chemical activation of carbon dots. The characteristics of carbon dots and activated carbon dots were determined using field emission scanning electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermogravimetric analysis. A series of experiments were conducted in a batch system to assess the effect of the system variables, i.e., initial pH, initial naphthalene concentration, adsorbent dosage, and contact time. The kinetic data showed better fit to the... 

In this study, hybrid nano adsorbent supported carbon dots was prepared and used for removing Cr(VI) from aqueous solution. Carbon dots were synthesized from sugarcane molasses under microwave irradiation. Hybrid nano adsorbent was prepared by impregnating carbon dot with H3PO4 in a ratio of 2:1 and introducing 0.01 M FeCl3 into the slurry. The carbon dot hybrid was activated via a conventional thermal method under N2 flow. The physico-chemical properties of the synthesized material were investigated using X–ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), N2 adsorption/desorption, and field emission scanning electron microscopy (FESEM). Chromium adsorption was studied... 

PEM (Positron Emission Mammography) imaging is a molecular imaging technique for early diagnosis and staging of breast cancer. So, it is very important to check the performance of the PAM device in order to improve the image quality. The aim of this work was to investigate the effects of Time Of Flight (TOF) and Depth Of Interaction (DOI) corrections in the PEM system's performance. For this purpose, the commercially available clinical PEM scanner (PEM Flex Solo II, Naviscan) was simulated using GATE software. This system consists of two non-rotating detector heads that are positioned in an opposing fashion on each side of the body part. Each detector head contains 12 sensitive PMTs with a 6... 

Hybrid composites of MIL-101(Cr) and Nanoporous Graphene with ratios in the range of 10–50% were prepared via hydrothermal synthesis method. This study deals with an experimental investigation on selective oxidation of H2S into elemental sulfur in the range of 200–270 °C, the catalyst activity and selectivity toward sulfur was studied. High-temperature reactor tests indicated that the MIL-101(Cr)–NPG50–Mo could be a promising candidate with conversion and selectivity of 100% and 99.5% at 200 °C. The MIL-101(Cr)–NPG50–Mo stability showed there were not any significant changes in physical properties, the activity was evaluated after 20 h which was completely stable without any changes  

In this paper, a mathematical model for the mesophilic bioleaching of uraninite is developed. The case of constant temperature, pH, and initial ore concentration is considered. The model is validated by comparing the calculated and measured values of uranium extraction, ferric and ferrous iron in solution, and cell concentration. Good fits of the model were obtained, while the values of the parameters were within the range expected. New rate expressions were used for the iron precipitation and uranium leaching rates. The rates of chemical leaching and ferric precipitation are related to the ratio of ferric to ferrous in solution. The fitted parameters can be considered applicable only to... 

Forced convective of water in horizontal tubes with conical tube inserts has been studied experimentally. The transient flow regime has been used for the tests. Experimental results are validated with existing well established correlation. The turbulators were placed in two different arrangements: converging conical ring, referred to as CR array and diverging conical ring, DR array. Two correlations for the Nusselt number based on the experiment are introduced for practical use. It is found that the insertion of turbulators has enhanced the Nusselt number for the DR arrangement up to 521%, and for the CR arrangement up to 355%, although using the turbulators cause a significant increase in... 

Co-Mo/Graphene composite synthesized for the first time through the spray pyrolysis method and applied as an HDS catalyst to produce a sulfur free Naphtha feed. The major advantage of the spray pyrolysis technique was its concurrent capability of the in-situ and simultaneous Co-Mo deposition upon the graphene. The produced material was characterized through the XRD, BET-BJH, FTIR and Raman spectroscopy as well as; the NH3-TPD, TPR, TEM and FESEM techniques. The prepared catalyst showed unique properties such as; high degree of total acidity of 5.1 (vs. the usual 0.2–2.0) mmole NH3/g-cat and a relatively high surface area of 705 vs. 189 m2/g of the commercial material. Furthermore, the... 

A new multi-objective intermodal hub-location-allocation problem is modeled in this paper in which both the origin and the destination hub facilities are modeled as an M/M/m queuing system. The problem is being formulated as a constrained bi-objective optimization model to minimize the total costs as well as minimizing the total system time. A small-size problem is solved on the GAMS software to validate the accuracy of the proposed model. As the problem becomes strictly NP-hard, an MOIWO algorithm with an efficient chromosome structure and a fuzzy dominance method is proposed to solve large-scale problems. Since there is no benchmark available in the literature, an NSGA-II and an NRGA are...