Loading...
Search for:
rezaee--a
0.136 seconds
Total 14720 records
Formal process algebraic modeling, verification, and analysis of an abstract Fuzzy Inference Cloud Service
, Article Journal of Supercomputing ; Vol. 67, issue. 2 , February , 2014 , pp. 345-383 ; Online ISSN: 1573-0484 ; Rahmani, A. M ; Movaghar, A ; Teshnehlab, M
2014
Abstract
In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the...
A 6–12 GHz wideband low-noise amplifier GaAs FET design with 0.8-dB average NF and 25-dB gain
, Article Microwave and Optical Technology Letters ; Volume 64, Issue 11 , 2022 , Pages 1883-1887 ; 08952477 (ISSN) ; Sharif University of Technology
John Wiley and Sons Inc
2022
Abstract
Low-noise amplifiers (LNAs) with low-noise performance are critical components in communication systems. However, reaching a high level of performance is difficult. This study introduces a LNA for radio frequency front-end receivers with a frequency range of 6–12 GHz. The planned LNA contains a two-stage high-electron-mobility transistor cascade amplifier with a minimum measured noise figure of 0.8 dB and a peak gain of 25 dB at room temperature. The proposed LNA is based on a gallium arsenide field-effect transistor transistor (CE3512K2) because of its good low-noise performance at microwave frequency bands. The measured results demonstrate that the proposed LNA is perfectly matched over...
Frame time-hopping patterns in multirate optical CDMA networks using conventional and multicode schemes
, Article IEEE Transactions on Communications ; Volume 53, Issue 5 , 2005 , Pages 863-875 ; 00906778 (ISSN) ; Nasiri Kenari, M ; Rezaee, N ; Sharif University of Technology
2005
Abstract
A class of generalized optical orthogonal codes (OOCs), namely, frame time-hopping (FTH) patterns with an extremely large cardinality, are studied for implementing multirate and multiservice (MR/MS) optical CDMA (OCDMA) networks. Conventional MR/MS methods, namely variable spreading rate and parallel mapping, are considered. Using FTH patterns, the problem of low OOC code cardinality in conventional MR/MS schemes is removed. Moreover, several new multicode methods, using subcode concatenation scheme, are proposed for MR/MS OCDMA. The proposed multicode schemes present flexibility for supporting MR/MS applications such as lower implementation complexity and cost, less need for service...
Applying a robust solution based on expert systems and GA evolutionary algorithm for prognosticating residual gas saturation in water drive gas reservoirs
, Article Journal of Natural Gas Science and Engineering ; Vol. 21, issue , November , 2014 , p. 79-94 ; Yassin, M. R ; Rezaee, M ; Aghajafari, A. H ; Shokrollahi, A ; Sharif University of Technology
2014
Abstract
In strong water drive gas reservoirs (WDGRs), the water encroachment in the gas zone has adverse effects on the gas mobility and causes considerable volume of gas to be trapped behind water front; therefore estimation of residual gas saturation after water influx is an important parameter in estimation of gas reservoirs with strong aquifer support. It is difficult to achieve a thorough and exact understanding of water drive gas reservoirs. It depends on several parameters of petrophysical and operational features. In majority of the previous studies about residual gas saturation, the correlations were depended on petrophysical properties such as porosity, permeability, and initial gas...
Experimental investigation of asphaltene content effect on crude oil/co2 minimum miscibility pressure
, Article Periodica Polytechnica Chemical Engineering ; Volume 64, Issue 4 , 2020 , Pages 479-490 ; Gandomkar, A ; Montazeri, G ; Honarvar, B ; Azdarpour, A ; Rezaee, M ; Sharif University of Technology
Budapest University of Technology and Economics
2020
Abstract
Minimum Miscibility Pressure (MMP) is regarded as one of the foremost parameters required to be measured in a CO2 injection process. Therefore, a reasonable approximation of the MMP can be useful for better development of injection conditions as well as planning surface facilities. In this study, the impact of asphaltene content ranging from 3.84 % to 16 % on CO2/heavy oil MMP is evaluated. In this respect, slim tube miscibility and Vanishing Interfacial Tension (VIT) tests are used. Regarding the VIT test, the Interfacial Tension (IFT) is measured by means of two methods including pendant drop and capillary apparatuses, and thereafter the MMP measurement error between slim tube and VIT...
Congestion Pricing with Consideration of Long‐Term Effects
,
M.Sc. Thesis
Sharif University of Technology
;
Poorzahedy, Hossein
(Supervisor)
Abstract
Congestion is the inseparable part of everyday life in large transportation networks. Expansion of road networks especially in downtown area is next to impossible and it is resulting multiplicative congestion problems. Congestion imposes private and public costs. Therefore, restricting policies on road use through cordon-based or area-based pricing is proposed to reduce the negative impacts of traffic, travel demand management and optimal use of transportation systems. This would produce better resource allocation through transportation network optimization. Implementation of congestion pricing policies induces short-term and long-term effects. In this thesis, it is attempted to determine...
On The Weil Conjectures
, M.Sc. Thesis Sharif University of Technology ; Jafari, Amir (Supervisor)
Abstract
” The story of the "Weil conjectures" is a marvelous example of mathematical imagination, and one of the most striking instances exhibiting the fundamental unity of mathematics.”In 1949,Andre Weil stated some conjectures on the zeta function of Algebraic varieties over finite fields .These conjectures were analogue of the properties of Riemann zeta function ,in particular Riemann hypothesis.In fact ,Weil built a bridge between Diophantine structure on varieties over finite fields (Counting of rational points on varieties) and cohomological structure of them over the field of complex numbers(topology of variety).In this thesis, first we state Weil’s motivations for these conjectures and state...
Driver’s Behavior at Intersection with Yield Control in Minor Road
, M.Sc. Thesis Sharif University of Technology ; Vaziri, Manouchehr (Supervisor)
Abstract
Compared to systematically signalized intersections, in the absence of any systematic instruction or signalization at unsignalized-prioritized intersections and due to lower levels of control, driver performance strongly steps in as a decisive factor of intersection traffic and geometric design. Therefore, the study of driver behavior at these intersections appears necessary. This thesis aims to study driver behavior at four prioritized intersections where the minor stream has to yield right of way to the main stream in the city of Mashhad, Iran. Following extraction of raw statistical data from extensive filming, the initial database was constructed consisting of 29 variables. Based on the...
The Modeling of Hydrogen Purification and Carbon Dioxide Capture by two Dimensional Porous Membranes Using Molecular Dynamicssimulations
, M.Sc. Thesis Sharif University of Technology ; Tafazzoli, Mohsen (Supervisor)
Abstract
Carbon dioxide is one of the most significant greenhouse gases in biocycle. This gas makes the equilibrium temperature by absorbing IR radiations on the earth. It is the reason that prevent the earth from freezing. Increasing CO2 emissions in atmosphere, makes problems such as global warming. According to the Kyoto Protocol, all the countries attended to this protocol, must decrease greenhouse gases emissions. Although H2 fuel is one of the best alternative fuel against fossil fuels, the most important industrial process (steam-methane reforming) produce CO2 as by-product. Thus, gas separation has a prominent role in industrial processes such as CO2 capture and H2 purification.Today, gas...
Facile synthesis of petal-like NiCo/NiO-CoO/nanoporous carbon composite based on mixed-metallic MOFs and their application for electrocatalytic oxidation of methanol
, Article Applied Catalysis B: Environmental ; Volume 244 , 2019 , Pages 802-813 ; 09263373 (ISSN) ; Shahrokhian, S ; Sharif University of Technology
Elsevier B.V
2019
Abstract
Porous carbon template decorated with mixed transition metals/metal oxides with tunable architecture is becoming increasingly important and attractive as a kind of novel electrode materials. In this way, mixed-metallic metal-organic frameworks (MOFs) provide an opportunity for fabrication of homogeneous mixed metals/metal oxides distribution in the porous carbon frame without any carbon precursor additive. Also, structures, dimensions and electrochemical performance of MOFs can be readily manipulated by simply tuning the metals molar ratio. In this study, we demonstrate the design and fabrication of petal-like NiCo/NiO-CoO metal/metal oxides with a rational composition embedded in 3D...
Dirac leaky wave antennas
, Article 5th International Conference on Millimeter-Wave and Terahertz Technologies, MMWaTT 2018, 18 December 2018 through 20 December 2018 ; Volume 2018-December , 2019 , Pages 1-5 ; 21570965 (ISSN); 9781538677179 (ISBN) ; Memarian, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
Dirac leaky-wave antennas (DLWAs) are derived from photonic crystals exhibiting Dirac cone dispersion around their Γ-point. DLWAs provide high directive beams and continuous frequency beam scanning, non-fluctuating leakage constant and real non-zero Bloch impedance at and around broadside, due to the closed and linear Dirac dispersion relation around broadside. These features, along with their inherent compatibility for higher frequency designs (larger unit cells compared to metamaterials), make DLWAs an ideal candidate for the upper microwave, mm-wave and terahertz frequencies, and for applications such as radar, 5G, spectroscopy, etc. In this review, we cover the recent developments on...
Interferometric Laser Imaging for Droplet Sizing (ILIDS)in Sparse Sprays
, M.Sc. Thesis Sharif University of Technology ; Kebriaee, Azadeh (Supervisor)
Abstract
In the present work we first introduced ILIDS and review the theory of interferometry and light scattering from droplets. Bases on ILIDS method, droplets are irradiated by monochrome sheet laser, where the superposition of reflected and first-order refracted beams form a parallel fringe pattern at out of focus plane on the imaging sensor in the forward-scatter region. This pattern can be related to the droplet size by using simple geometrical optics. For the present work, an image processing algorithm is utilized to capture weak and noisy images of droplets to reduce the lost data in the sizing procedure. Since ILIDS method is applied for small and dilute spray, it is suitable for...
3D ternary Ni: XCo2- xP/C nanoflower/nanourchin arrays grown on HCNs: A highly efficient bi-functional electrocatalyst for boosting hydrogen production via the urea electro-oxidation reaction
, Article Nanoscale ; Volume 12, Issue 30 , 2020 , Pages 16123-16135 ; Shahrokhian, S ; Sharif University of Technology
Royal Society of Chemistry
2020
Abstract
Over the last few years, substantial efforts have been made to develop earth-abundant bi-functional catalysts for urea oxidation and energy-saving electrolytic hydrogen production due to their low cost and the potential to replace traditional noble-metal-based catalysts. Nevertheless, finding a straightforward and effective route to prepare efficient catalysts with unique structural features and optimal supports still is a big challenge. Among the various candidates, metal-organic framework (MOF)-derived materials show great advantages as new kinds of active non-precious catalysts. On the other hand, the controllable integration of MOFs and carbon-based nanomaterials leads to further...
Analytical study of open-stopband suppression in leaky-wave antennas
, Article IEEE Antennas and Wireless Propagation Letters ; Volume 19, Issue 2 , 2020 , Pages 363-367 ; Memarian, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2020
Abstract
In the majority of leaky-wave antennas (LWAs), the lack of broadside radiation is due to the existence of an open-stopband (OSB) at broadside. In this letter, we present a study on the OSB suppression in LWAs. In particular, we start from a simple unit cell comprising a planar waveguide having alternating open and short sidewalls. The analytical and simulated band structures testify consistently that OSB suppression can indeed be realized by proper design, analytically studied using mode-matching, and further supported by full-wave simulations. An LWA is then implemented using the substrate integrated waveguide (SIW) technology, which provides interesting features such as a high directive...
Modification of Electrode Substrates Using Nanocomposites Including Carbon Nanomaterials and Multimetallic Nanoparticles for Electrocatalysis of some Fuel Cells Reactions
, Ph.D. Dissertation Sharif University of Technology ; Shahrokhian, Saeed (Supervisor)
Abstract
In this research, nanocomposite containing reduced graphene oxide nanosheets (RGO) and trimetallic three-dimensional (3D) Pt-Pd-Co porous nanostructures was fabricated by galvanic replacement technique. First, GO suspension was drop-casted on the electrode surface, then GO film reduction was carried out by cycling the potential in negative direction to form the RGO on GCE (RGO/GCE). Then, electrodeposition of the cobalt nanoparticles (CoNPs) as sacrificial seeds was performed onto the RGO/GCE by using cyclic voltammetry. Afterward, Pt-Pd-Co 3D porous nanostructures fabrication occurs through galvanic replacement method based on a spontaneous redox process between CoNPs and solution...
Ruthenium/Ruthenium oxide hybrid nanoparticles anchored on hollow spherical Copper-Cobalt Nitride/Nitrogen doped carbon nanostructures to promote alkaline water splitting: Boosting catalytic performance via synergy between morphology engineering, electron transfer tuning and electronic behavior modulation
, Article Journal of Colloid and Interface Science ; Volume 626 , 2022 , Pages 1070-1084 ; 00219797 (ISSN) ; Shahrokhian, S ; Sharif University of Technology
Academic Press Inc
2022
Abstract
Exploring bi-functional electrocatalysts with excellent activity, good durability, and cost-effectiveness for electrochemical hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte is a critical step towards a sustainable hydrogen economy. Three main features such as high density of active sites, improved charge transfer, and optimized electronic configuration have positive effects on the electrocatalyst activity. In this context, understanding structure–composition–property relationships and catalyst activity is very important and highly desirable. Herein, for the first time, we present the design and fabrication of novel MOF-derived ultra-small Ru/RuO2 nanoparticles...
A compact microstrip combline filter for microwave S-band
, Article 29th Iranian Conference on Electrical Engineering, ICEE 2021, 18 May 2021 through 20 May 2021 ; 2021 , Pages 891-894 ; 9781665433655 (ISBN) ; Memarian, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2021
Abstract
In this paper, a wideband coupled-resonator microstrip bandpass filter is designed and experimentally demonstrated in the S-Band. The filter is comprised of quarter-wavelength hair-pin resonators, reducing resonator and filter footprint compared to conventional hairpin designs. Additionally, it is considerably forgiving to fabrication tolerances and yields remarkably close matched results between theory, simulation, and measured results. One demonstration presented has minimal insertion loss ${(< 1{dB})}$ for the entire wide bandwidth of 3.4 GHz to 4.2 GHz. Wider bandwidths up to 60% are also observed using the design. The proposed filter is an attractive solution when space is a critical...
Relativistic self-focusing of intense laser beam in thermal collisionless quantum plasma with ramped density profile
, Article Physical Review Special Topics - Accelerators and Beams ; Volume 18, Issue 4 , April , 2015 ; 10984402 (ISSN) ; Yazdani, E ; Rezaee, S ; Anvari, A ; Sadighi Bonabi, R ; Sharif University of Technology
American Physical Society
2015
Abstract
Propagation of a Gaussian x-ray laser beam has been analyzed in collisionless thermal quantum plasma with considering a ramped density profile. In this density profile due to the increase in the plasma density, an earlier and stronger self-focusing effect is noticed where the beam width oscillates with higher frequency and less amplitude. Moreover, the effect of the density profile slope and the initial plasma density on the laser propagation has been studied. It is found that, by increasing the initial density and the ramp slope, the laser beam focuses faster with less oscillation amplitude, smaller laser spot size and more oscillations. Furthermore, a comparison is made among the laser...
Oxidation of H2S to elemental sulfur over alumina-based nanocatalysts: Synthesis and physiochemical evaluations
, Article Scientia Iranica ; Volume 23, Issue 3 , 2016 , Pages 1160-1174 ; 10263098 (ISSN) ; Kazemeini, M ; Fattahi, M ; Rashidi, A. M ; Vafajoo, L ; Sharif University of Technology
Sharif University of Technology
2016
Abstract
In this paper, oxidation of H2S into elemental sulfur over synthesized aluminabased nanocatalysts was physiochemically investigated and the results were compared with a commercial Claus catalyst. The wet chemical, co-precipitation, and spray pyrolysis techniques were employed to synthesize several alumina nanostructures. Then, the SEM, XRD, and ASAP analysis methods were utilized to characterize in order to choose the best nanocatalyst. The sulfur and H2S contents were determined through the standard UOP techniques. Amongst the synthesized materials, Al2o3-supported sodium oxide prepared through the wet chemical, and Al2o3 nanocatalysts via spray pyrolysis methods were the most active...
A new route for the synthesis of functionalized benzothiadiazine 1,1-dioxide derivatives via intramolecular C–H activation reactions of N,N′,N′′-trisubstituted guanidines and benzenesulfonylchloride
, Article Journal of Sulfur Chemistry ; Volume 39, Issue 6 , 2018 , Pages 646-655 ; 17415993 (ISSN) ; Nematpour, M ; Rezaee, E ; Jahani, M ; Tabatabai, S. A ; Sharif University of Technology
Taylor and Francis Ltd
2018
Abstract
In this study, a simple and appropriate procedure for the synthesis of functionalized benzothiadiazine 1,1-dioxide with good yields via the Cu-catalyzed intramolecular C–H activation reaction from benzenesulfonylchloride and N,N′,N′′-trisubstitutedguanidines, generated by copper(II) oxide-catalyzed hydroamination of carbodiimides, is reported. © 2018, © 2018 Informa UK Limited, trading as Taylor & Francis Group