Loading...
Search for: rezapour-rastaghi--hamed
0.21 seconds

    Experimental and Numerical Study of Gas Turbine Model Combustor

    , M.Sc. Thesis Sharif University of Technology Rezapour-Rastaghi, Hamed (Author) ; Mardani, Amir (Supervisor)
    Abstract
    High Swirl Combustors can provide stable flames in wide range of operating conditions. Double swirl combustors, as one of the newest designs in this field, have particular effects on improving the efficiency of combustion chambers in terms of flame stability, mixing process quality and reducing combustion pollutants. In this study, a double swirl gas turbine combustor, SGTMC, which is redesigned version of a German combustor (GTMC), has been investigated. According to experimental section of this study, lean stability limits, UHCs, CO and NOx has been measured and analyzed. Results show that this burner can provide a stable flame even in very low equivalence ratios. Also in some specific... 

    Design and Simulation of Bioimpedance Chip for Monitoring Heart Failure

    , M.Sc. Thesis Sharif University of Technology Rezapour, Mojtaba (Author) ; Sharifkhani, Mohammad (Supervisor)
    Abstract
    Cardiovascular disease is one of the leading causes of death and mortality. among these diseases, heart muscle inability, especially acute decompensated heart failure is very common. There are several methods to diagnose and monitor this disease, but a method that is accurate, non-invasive, portable and easy to access and easy to measure without multiple visits to the clinic; Priority for use. Early detection and continuous monitoring of fluid status by measuring the bio-impedance (Bio-Z) measurement of thoracic magnitude or phase is critical in reducing the mortality of chronic heart failure (CHF) patients. In this dissertation, for monitoring chronic heart failure, bio-impedance chips with... 

    Modeling Multi-path Covering Routing Problem

    , M.Sc. Thesis Sharif University of Technology Rezapour Niari, Maryam (Author) ; Koorosh, Eshghi (Supervisor)
    Abstract
    The location problem is one of the main topics at the strategic level. This problem is investigated along with many areas such as network design and path covering problems. Routing between source and destination nodes is done in such a way that maximizes traffic coverage and reduces costs as much as possible. Routing problems are considered in goods distribution areas and urban transit systems. Goods distribution from set of cross-docks can help to reduce costs and improve resource efficiency. So, this topic is considered in this research and a suitable model is proposed. Defining and developing of the road and rail transportation networks are main topics in urban traffic management which... 

    Implementation of a Retrospective Trust-Region Method for Unconstrained Optimization

    , M.Sc. Thesis Sharif University of Technology Rezapour, Mostafa (Author) ; Mahdavi Amiri, Nezamoddin (Supervisor)
    Abstract
    We explain a new trust region algorithm for solving unconstrained optimization problems where the redius update is computed using the model information at the current iterate rather than at the preceding one, recently proposed by Bastin, Malmedy, Mouffe, Toint and Tomanos. Then we discuss a modification mixing the concepts of nonmonotone trust region, line search and internal doubling. We use line search to finds a point that satisfies the Wolfe conditions. After that, we explain a new trust region algorithm for solving unconstrained optimization problems where simultaneously satisfies the quasi-Newton condition at each iteration and maintains a positive-definite approximation to the Hessian... 

    An efficient tabu search algorithm for the single row facility location problem [electronic resource]

    , Article European Journal Of Operational Research ; Vol. 205, No. 1, pp. 98-105 Samarghandi, H. (Hamed) ; Eshghi, Kourosh ; Sharif University of Technology
    Abstract
    The general goal of the facility layout problem is to arrange a given number of facilities to minimize the total cost associated with the known or projected interactions between them. One of the special classes of the facility layout problem is the Single Row Facility Layout Problem (SRFLP), which consists of finding an optimal linear placement of rectangular facilities with varying dimensions on a straight line. This paper first presents and proves a theorem to find the optimal solution of a special case of SRFLP. The results obtained by this theorem prove to be very useful in reducing the computational efforts when a new algorithm based on tabu search for the SRFLP is proposed in this... 

    Sensitivity analysis of matching pennies game [electronic resource]

    , Article Mathematical and Computer Modelling ; Volume 51, Issues 5–6, March 2010, Pages 722–735 Yarmand, H. (Hamed) ; Eshghi, Kourosh ; Sharif University of Technology
    Abstract
    In this paper, we have discussed the results of sensitivity analysis in a payoff matrix of the Matching Pennies game. After representing the game as a LP model, the sensitivity analysis of the elements of the payoff matrix is presented. The game value and the optimal strategies for different values of parameters are determined and compared  

    Adaptive capacity management in cloud manufacturing hyper-network platform: Case of COVID-19 equipment production

    , Article International Journal of Management Science and Engineering Management ; Volume 17, Issue 4 , 2022 , Pages 239-258 ; 17509653 (ISSN) Rezapour Niari, M ; Eshghi, K ; Fatahi Valilai, O ; Sharif University of Technology
    Taylor and Francis Ltd  2022
    Abstract
    Cloud Manufacturing (CMfg) is a service-oriented manufacturing (SOM) paradigm that provides a dynamic, scalable, and virtualized working ecosystem. The CMfg collaborative structure can be modeled as a hyper-network-based service-demand matching architecture. It is enriched with quality of service (QoS) characteristics to produce customized products in a stable and reliable network. This stability should be considered in the overall manufacturing network mechanism. This paper has provided adaptive strategies utilizing available resources and capacities to enhance the system’s stability and reliability against the unexpected events. The capabilities of the enhanced framework are utilized to... 

    Topology analysis of manufacturing service supply–demand hyper-network considering QoS properties in the cloud manufacturing system

    , Article Robotics and Computer-Integrated Manufacturing ; Volume 72 , 2021 ; 07365845 (ISSN) Rezapour Niari, M ; Eshgi, K ; Fatahi Valilai, O ; Sharif University of Technology
    Elsevier Ltd  2021
    Abstract
    Cloud Manufacturing (CMfg), a new manufacturing paradigm, enables an opportunity for manufacturing enterprises to respond to a wide variety of demands. The CMfg concept integrates the distributed resources and capacities in a shared economy, transfers them to the virtual manufacturing services with various quality of service (QoS) properties. These services are invoked to collaborate in producing customized demands with specific functional and non-functional properties. The operational perspective of the service-demand matching problem is considered more in the literature; however, it is a challenging problem in the CMfg ecosystem. This paper evaluates the service-demand matching problem... 

    Stability analysis of feature ranking techniques in the presence of noise: A comparative study

    , Article International Journal of Business Intelligence and Data Mining ; Volume 17, Issue 4 , 2020 , Pages 413-427 Ramezani, I ; Khorram Niaki, M ; Dehghani, M ; Rezapour, M ; Sharif University of Technology
    Inderscience Publishers  2020
    Abstract
    Noisy data is one of the common problems associated with real-world data, and may affects the performance of the data models, consequent decisions and the performance of feature ranking techniques. In this paper, we show how stability performance can be changed if different feature ranking methods against attribute noise and class noise are used. We consider Kendall's Tau rank correlation and Spearman rank correlation to evaluate various feature ranking methods stability, and quantify the degree of agreement between ordered lists of features created by a filter on a clean dataset and its outputs on the same dataset corrupted with different combinations of the noise level. According to the... 

    Optimal-Robust Control of Drug Delivery in Cancer Chemotherapy

    , M.Sc. Thesis Sharif University of Technology Hosseini, Fatemeh (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Chemotherapy is a proven and effective systematic approach to treat various types of cancers. Despite its advantages, chemotherapy would kill healthy as well as cancer cells. To overcome this problem, different controlling strategies are implemented. This study aims to provide a medicine drug delivery schedule for chemotherapy (by designing a proper controlling system) based on the verifiable mathematical models. First, the dynamic model is analysed and stability points are reviewed. The selected model has five state variables and two inputs. In this study, the focus is on dynamic model analysis and obtaining an effective and appropriate treatment pattern by designing a proper controller. To... 

    Nonlinear Vibration Analysis of Non-Uniform Beam in two Lateral Directions by Multiple Scales Method: Application in Wind Turbine

    , M.Sc. Thesis Sharif University of Technology Karimi, Behnam (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Environmental issues and energy crisis have led the world attention to the renewable energies; especially wind power, since they have low cost and high reliability. One of the most challenging areas of studying for wind power is to increase the capacity of wind turbines. As a result, over the years, wind turbines have got progressively larger. Vibration is one of the problems that reduces the life and efficiency of wind turbines; and the growing size of the blades has worsen this problem due to the importance of nonlinear effects in large scale wind turbines. Researchers have been constantly working on this issue in order to make the wind turbines more efficient. In this research, a... 

    Robust Power Control of Wind Turbine with Smooth Switching between Operational Regions using a Two-mass Model

    , M.Sc. Thesis Sharif University of Technology Nouriani, Ali (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Wind turbines have been the subject of many researches in recent decades. Optimization and continuous improvement of these systems play a decisive role in the development and exploitation of wind farms. Wind turbines can be studied from several aspects such as structure, dynamics, aerodynamics, electricity and control. In this research, robust power control of the wind turbine has been studied with emphasis on accurate 2 DOF mechanical and aerodynamic modeling. Aerodynamic coefficients of the turbine have been calculated using the numerical methods and the effect of this numerical modeling has been studied in comparison with the analytical methods on the turbine power control. Several new... 

    Using Robust Control in Drug and Virus Scheduling in Chemovirotherapy Nonlinear Model

    , M.Sc. Thesis Sharif University of Technology Mobaraki, Mobina (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Best cancer treatment is the one which reduces the tumor density in minimum time and side effects, considering the input limitations. In this paper, tracking controller and robust controllers are designed to achieve the mentioned objectives, simultaneously. An ODE-based mathematical model of the human body under chemovirotherapy is selected, which includes the uninfected and infected tumor cells, free viruses, immune cells, and a chemotherapeutic drug. For tracking purposes, a servo controller based on the entire eigenstructure assignment (EESA) approach is applied to the model, continuously and discretely. For robust purposes H-infinity and D-K iteration approaches are implemented and... 

    Assessment of Seismic Retrofit Policies for Buildings

    , M.Sc. Thesis Sharif University of Technology Movahedi, Ali (Author) ; Kashani, Hamed (Supervisor)
    Abstract
    Occurrence of natural disasters such as earthquake could seriously damage most buildings especially those with insufficient resistance located in urban worn-out textures. In order to reduce unpleasant consequences of an earthquake, appropriate policies need to be considered to persuade the beneficiaries to follow retrofitting standards in the process of planning, designing, and construction of buildings. These policies shall be implemented through institutions in arbitrary or obligatory forms, by encouragement or penalty mechanisms. In order to consider these policies, first of all we need to identify the beneficiaries and their particulars. By studying and considering subjects discussed in... 

    Parametric study and computation of seismic performance factors of braced shear panels

    , Article Scientia Iranica ; Volume 23, Issue 2 , 2016 , Pages 460-474 ; 10263098 (ISSN) Hamed, A ; Mofid, M ; Sharif University of Technology
    Sharif University of Technology  2016
    Abstract
    By locating a steel shear panel on the intersection point of the X-braces, concentrically or eccentrically braced shear panel (CBFSP or EBFSP) is formed. In this paper, to perform parametric study, 1-story CBFSP and EBFSP models with span length greater or less than height are considered. Using linear static analyses, the effects of size and location of the shear panel on the lateral stiffness of the frame with respect to the moment resisting frame with the same member sections are investigated. Next, for 1- And 3-story models, maximum displacement, along with base shear, and the ratio between the dissipated energy and input energy are examined under 4 ground motion records. Behavior of the... 

    Modelling and Electromechanical Control of Variable Speed wind Turbine in Order to Gain Maximum Wind Power

    , M.Sc. Thesis Sharif University of Technology Golnary, Farshad (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    In this research, the main purpose of the controller design is in the second region of operation of a wind turbine, which involves absorbing the maximum energy from the wind. WindPACT 1.5MW turbine has been investigated and the power coefficient of this turbine has been obtained using WT-PERF and FAST softwares. Simulations show that the results of both methods are well matched. Then, using ANFIS, a method for estimating the wind speed is derived from the data obtained by FAST. Inputs to the ANFIS system are the turbine aerodynamic power, rotor speed and blade pitch angle while the output of ANFIS system is the estimated wind speed. The maximum power coefficient of the wind turbine occurs... 

    Laboratory Investigation of the Effects of Sodium Chloride Concentration on Soil Water Retention Curve and Volumetric behavior Using an Unsaturated Automatic Oedometer

    , M.Sc. Thesis Sharif University of Technology Nasiri, Hamed (Author) ; Sadeghi, Hamed (Supervisor)
    Abstract
    Laboratory studies to investigate the effects of different saline concentrations (such as sodium chloride or calcium chloride) on the soil water retention behavior of clayey soils and their volumetric changes have received much attention recently. However, many previous studies have investigated these effects in only one path of the SWRC (wetting or drying path) and the effects of saline concentration on hydraulic hysteresis have not been considered. In addition, researchers have frequently studied these effects on SWRC on clay samples, and little research has been done on collapsible soils. Therefore, the most important purpose of this study is to investigate the effects of increasing... 

    Probabilistic Framework to Quantify the Resilience of Urban Gas Distribution Networks

    , M.Sc. Thesis Sharif University of Technology Baratian, Amin (Author) ; Kashani, Hamed (Supervisor)
    Abstract
    This study proposes a probabilistic framework to quantify the seismic resilience of urban natural gas distribution networks. Infrastructure resilience is defined as the ability to maintain performance after a hazard or, in case of a loss of performance, return to the minimum desired level in the optimal time. The framework presented in this research is comprised of multiple interconnected probabilistic models. These models work in harmony to characterize the impact of the earthquake on various infrastructures such as the buildings and urban gas distribution network components, as well as the probable consequences of the earthquake. The post-earthquake recovery of the gas distribution network... 

    Robust Optimal Control of Drug Delivery in Cancer Chemotherapy based on a New Realistic Dynamic Model of the Process

    , M.Sc. Thesis Sharif University of Technology Rafiei, Behrooz (Author) ; Moradi, Hamed (Supervisor)
    Abstract
    Today, cancer mortality is one of the most important problems, even considering the scientific advances that offer more effective solutions to treat some diseases, providing a way to prevent and treat this disease is one of the most important issues that engineers have considered. This is achieved by designing a controller to minimize the size of the cancer tumor population, increase healthy cells, optimize treatment time, and drug dose.To achieve this goal, pharmacokinetic, pharmacodynamic, tumor growth, and healthy cell growth models, and mathematical models for subsystems that affect tumor growth, such as the angiogenic system, have been studied to develop a single mathematical model. In... 

    Analysis of Seismic Vulnerability Reduction Policies of Residential Buildings Using a Multi-agent Evolutionary Game Model Based on Prospect Theory

    , M.Sc. Thesis Sharif University of Technology Hosseini, Ahmad (Author) ; Kashani, Hamed (Supervisor)
    Abstract
    Due to the vulnerability of urban fabric and residential buildings to earthquakes and considering its destructive social and economic effects on society, the need to adopt appropriate policies to prevent and reduce vulnerability, has been increasingly considered by policy makers. Despite the laws, regulations, incentives and penalties that policymakers have envisioned to prevent unprincipled and unsafe construction, evidence shows that a significant number of new buildings being built in the country are not earthquake resistant and there are many violations in design, implementation and supervision that is done by the stakeholders. To solve this problem, research has been done on the...