Sharif Digital Repository

The iron and steel industry has faced several challenges during the recent years. There has always been an aspiration towards higher economic profitability for the system. During the mid 1970s and 1980s the energy crises caused a dramatic rise in energy costs, which led to an increased awareness in energy conservation. In recent years, climate change issues have become more important for the industry. The operating practices for an industrial system are often affected by external restrictions concerning the economical, energy and environmental efficiency of the system. There are a large number of ways to increase the system efficiency, e.g. installation of new process equipment, and practice... 

In a single chemical plant, the operation of each unit operation is not independent of each other. In the other hand, the main operations are performed in reactors following by several separation steps including distillation and purification units. The total energy requirements are sullied by the heat exchanger networks. The performance of these systems is improved by integration and intensification of the reactor and distillation column in a single unit. The main objective of the present work is to provide an effective design approach to intensify the reactor and distillation column. In a reactive distillation column, the reaction and separation is done in a single unit. Increasing... 

The energy section has a significant share in the emission of environmental pollutants. Based on the recent investigations about 80 percent of greenhouse gases are emitted into the environment from this sector. This present research has focused on estimating costs of pollution control, using the energy system model. In order to have a better understanding of the relationship between energy and environment, the reference energy system for Guilan Province has been developed; then by having energy demand data, historical capacity data for each technologies and potential of energy resources as well as, the development of provincial energy system has been studied. After the model verification and... 

Hydro power is a clean energy resource which has numerous advantages over other renewable energy systems including competitiveness with fossil fuel systems, high reliability, considerable potential, and availability of technology. These advantages have drawn attention to hydropower systems. Small Hydro Power (SHP) systems can be used for supplying the demand of rural and remote areas where electricity network rarely exists. SHP may also provide an investment opportunity. Comprehensive analysis of design features and operation of SHP and management of risks involved requires development and application of reliable analytical tools. The present research aims at developing a model for optimal... 

Due to the growth of energy consumption the use of new technologies and efficient energy conversion is necessary. An example of efficient energy conversion technology is CCHP (Combined Cooling, Heating and Power). The aim of the present research work is to develop a model that could be applied for optimal design of a hybrid CCHP system which would be Solar Combined Cooling, Heating and Power (SCCHP). In order to do so,microturbine power system, cooling and heating equipment’s such as absorption system and heat exchanger and also solar collector have been considered as an integral part of the system. The objective of the application of the model has been to identify proper sizing of all... 

Energy supply system model (ESM) is used as an analytical tool for policy making and optimizing the allocation of energy resources, selecting the best combination of energy carriers and technologies, and also determining required investments for development and operation of energy supply system, in order to meet the useful demand of energy. Although the modeled process in this Bottom-Up mathematical tool has deterministic characteristics, but evolution of exogenous parameters for energy sector have uncertainty which may impact on results of energy model. Limitations of applied methods for application of deterministic energy models under uncertain conditions result that all uncertain... 

Environmental and economic scarcity of resources are the most important challenges of industry sector. Iran confronted with lack of sufficient water resources and proper management and faces with drought and its environmental and economic consequences. It is a complicated challenge to provide the water demand without any damage to the ecosystem and it needs to do social, economic and environmental assessments. Wastewater treatment (water recycling) is an alternative option for supplying water demand. Wastewater treatment system (collecting, transportation to the treatment plant, wastewater treatment, and discharge) designed in order to solve hygienic and health issues in first place, but it... 

Energy innovation is essential for tackling climate change. However, an established set of indicators, that can support policy makers in their design of policy mixes, has not been developed for evaluating the performance of energy innovation systems. So, one of the purpose of this study is to list and classify a large set of indicators of the performance of energy innovation systems at sectoral and technological levels. 120 listed indicators are evaluated using four usefulness criteria, demonstrating significant weaknesses in the available indicators. The indicators are also classified according to an innovation process categorization to see if they cover all aspects of an innovation system... 

Buildings are responsible for 40% of total energy consumption worldwide. A significant portion of this energy contributes to building temperature control, and energy storage is an effective way to reduce energy consumption and to levelize the supply of heat load. A solution for reducing energy consumption in the building is to increase the thermal inertia of the building and to store energy using smart materials in the building components. Materials with phase change can stabilize the internal temperature of the building.In the present study, model is exmined with the help of modeling the thermal behavior of a room in Tehran in summer, using MATLAB software. The problem is solved by the... 

The purpose of the present study is to plan an industrial system, over a period of 10 years, so that over time, while supplying the required demand, to optimal resource utilization with regard to material reuse and recovery flows of losses as well as the use of renewable resources move to implement the concept of a circular economy. One of the main incentives for the transition to a circular economy is carbon tax policy, which has been taken into account. The results of the decision-making model based on cost and flow constraints indicate that the use of carbon dioxide as a by-product of Pars Petrochemical Extraction Unit in order to produce urea in Pardis petrochemical industry in addition... 

The exit flue gas temperature of conventional gas fired boiler is generally high and considerable energy is lost to environment. Therefore, new methods are needed to recover water and heat from boiler flue gas in order to reduce overall plant water consumption as well as to increase energy efficiency and mitigate detrimental emissions. This project involved design of a heat and water recovery system including condensing heat exchangers to be used in residential buildings. In this project based on simulation of heat and water recovery system the recoverable amount of heat and efficiency improvement potential at various conditions such as different exit flue gas temperatures and different... 

Waste management is one of the essential and basic utility services in 21st century, especially in rural areas. It includes different environmental, technical, economic, legal and social aspects which need to be considered in levels of waste generation, transport, treatment and disposal. Therefore, considering economic criterion in waste management programs, as the only one criterion, will result in environmental impacts in long-term and impose high costs to the society and the economy overall. The main purpose of this study is to develop a multi-criteria mathematical model, which take into account both economic and environmental criteria in order to present an integrated municipal solid... 

Industrial parks represent integrated industrial systems where it helps implementing efficient measures for managing natural and fossil fuel resources and their impact on environment quality. In Iran, the most industrial parks have faced serious problems due to the irreversible effects on ecosystems. mass/energy flows management and optimization based on industrial ecology, can lead to minimizing the environmental impacts and to maximizing the value added of industrial parks simultaneously. In the present research, sustainable development in Siri island as Eco-industrial park in Iran has been investigated. The island includes: extraction, separation, operation and transportation of crude oil... 

In a steel production plan primary resources entered the process are converted to high value products and byproducts. To this end, resources need to pass several consecutive process that require utility streams. One could not achieve the optimum operation of an industrial process unless they maximize the product and minimize the utility and waste. Therefore, it is important to consider the process stream integrated. The aim of this work is to find the optimum consumption of water and energy in a steel production and to calculate the potential reduction in water and energy resource destruction. Present work could be define a mathematical programing problem in which water users and all streams... 

In line with the energy policies of the country, which is based on the development of the natural gas system, the natural gas transmission sector has also had a significant expansion during this period, especially in recent years. On the other hand, the promotion of energy efficiency has been a major issue in energy policies and programs. Therefore, the necessity of expanding and developing the rational use of energy has been considered more than ever. The use of energy recovery technologies will be an effective step in this regard. Owing to the wide expansion of gas pressure regulating stations in Iran and the high potential losses in pressure relief valves, substituting an expansion... 

Due to increasing population and economic growth that has improved the living standards of human societies, the resources of the three sectors of water, energy, and food are in short supply. The close connection between these three parts requires integrated policy-making. In this research, for an integrated water, energy, and food system, an integer linear programming model has been developed for the optimal selection of technologies, their capacity, and their water and energy flow. Agricultural development policies include the construction of greenhouses and the use of renewable energy technologies and wastewater treatment technology to supply energy and water to the domestic and... 

As producing and consuming of natural gas has increased in recent years, improving natural gas distribution and transfer network systems has become vital. Pressure reduction station (PRS) is an important part of the natural gas network. Common PRSs are facing two issues: first is the pressure reduction technology, which is throttling valve that destroys the exergy of the high pressure flow. The solution is to utilize turbo-expander instead which can recover the energy. Second is the preheating technology which is boiler and water bath heater in the common systems that cause environmental problems. Using solar collectors is one of the best solution based on the literature. Since the solar...