Sharif Digital Repository

In the seismic design of steel special moment frames, it is necessary to ensure that columns are generally stronger than beams. This reduces the probability of a weak story failure mechanism of the frame, and ensures the formation of beams' plastic hinges earlier than the columns’. This criterion is known as strong column-weak beam (SCWB) in seismic design codes and is checked by a formula in the form of a ratio of total flexural strengths of columns to beams framing at each joint. It is common practice to ignore the column’s section change at the splice location and to use the flexural strength of the column’s larger section in evaluating this ratio. In this paper, several 20-story steel... 

In restructured power system, the Independent System Operator (ISO) implements Security Constraint Unit Commitment (SCUC) for clearing of day-ahead market. In this project, SCUC is also uses for simultaneous clearing of energy and reserve market. Spinning reserve and of generating units and Interruptible Loads (IL) are considered as system operating reserves in the proposed model. Some of IL usage restrictions such as maximum load curtailed, maximum curtailment hour in a day, maximum length of each curtailment and etc is also considered. One of these constraints is interruption time (the time between ISO’s request and IL’s Answer) which is very difficult to formulate. Expected Energy Not... 

Turbulence can distort and corrupt the image in quite a few ways when light from a distance star or another astronomical object enters the Earth's atmosphere. It is inevitable that all images produced by any telescope on ther Earth are blurred by these distortions. Adaptive Optics is a technology used to improve the performance of optical systems by reducing the effect of wavefront distortions: it aims at correcting the deformations of an incoming wavefront by deforming a mirror in order to compensate for the distortion. The research work reported in this thesis presents a solution to the surface shape control problems in a Deformable Mirror system. Our first goal is to derive equations that... 

Analog to digital converters with different specifications are widely used in modern electronic circuits. The significant demand on pipeline converters in several low power applications is mainly due to their high speed and high resolution characteristics. Fast and simple design of analog circuits using CAD tools, is highly sought after by integrated circuit designers. In this thesis, pipeline analog to digital converters is studied and a CAD tool is proposed for transistor level design and optimizations. The main advantage of this design in comparison with the previous works is that the yield and power consumption are considered as optimization factors. The module operates in three parts:... 

In small settling tanks, the sludges can be removed using perforated pipes. In this method the pipe is placed in the depth of a fluid and the lateral inflow through perforations lead to the outlet. Since there are few researches about hydraulic characteristic of perforated pipes, this research will investigate the hyadraulic characteristic of these pipes experimentally. One of the main objectives of these pipes is to use the entire lenghte of the pipe and also provide the uniform distribution of inflow. In the past studies, it was found out that inflow mostly comes through downstream perforations. The objective of this research is to find the distribution of discharge along the perporated... 

Textile industry is one of the biggest consumers of water in the world. Effluents of textile industry ordinarily have huge rate of dye compounds which are toxic and persistent in environment. In case which they did not treat and discharged in the environment, they can create cancer, poisoning and etc. Finding efficient, economic and fast method for treating of these effluents is an important factor on the management. Combination of ultrafiltration membrane and reverse osmosis processes, has taken into consideration as an efficient and fast method of treatment of textile effluents in recent years. One of the fundamental problems of this process is the high costs of operation and chemical... 

Solving the visual symbol grounding problem has long been a goal of modern aritificial intelligence. Due to recent breakthroughs in deep learning methods for natural language processing and visual interpretation tasks‚ the field now seems to be as near to achieving this goal as it ever was. Also recent progress in using recurrent neural netowrks (RNNs) for image description‚ has motivated the exploration of their application for video description tasks. However, while images remain static‚ interpreting videos require modeling complex dynamic temporal sturctures and then properly integrating that information into a natural language description. Recurrent neural networks can be both used to... 

Performance of reinforced concrete frames is highly dependent on detailing of the joint connections between its members, such as beams and columns. To have a good structural behavior, joints must show ductile behavior and designed based on the philosophy of strong column-weak beam. In the case of sever lacking ductility, strength or even rigidity of the connections, or having a weak column-strong beam, in the existing structures, there is a need for seismic upgrading of the connection. There are several ways for seismic upgrading of this type of connections.In this research, using steel plates for seismic upgrading of Concrete Beam-Column connections subjected to axial and cyclic loads has... 

Modern sensors consist of arrays of detectors specially arranged to enhance precision, capabilities, and field of view (FOV). Sensor arrays can have multiple functionalities such as the simultaneous detection of position and motion. We use a linear sensor model and develop an optimization method to design an array of photodiodes. Our objective function minimizes bias and variance estimations. We introduce a maximum likelihood technique to approximate and determine the bias caused by measurement errors, and verify our theory by statistically complete simulations. We apply our theory to design an optimal sun sensor. The sensor has a predefined conical FOV, and its accuracy is controlled by a... 

In this dissertation, we investigate the problem of the existence of finite geodetic sequences from point to point (0, n). This has not been proven in the general case. In this dissertation, we present an article that illustrates this question in a particular case of z ^ 2 subspaces whose self and complement are infinite and connected (e.g., slit planes, half-planes, and sectors). Writing x_n for the sequence of boundary vertices, we show that the sequence of geodesics from any point to x_n has an almost sure limit assuming only existence of finite geodesics. For all passage-time configurations, we show existence of a limiting Busemann function. Specializing to the case of the half-plane, we... 

Spine column is the most important musculoskeletal structures. One of the serious health problems in societies, especially among aged population is osteoporosis. Loss of bone density in bone structures is called osteoporosis which increases the risk of fracture due to a decrease of bone stiffness and bone strength. Spine is the most common sites for osteoporosis-related fractures. Current assessment of osteoporosis status is based on bone densitometry tools like QCT (Quantitative Computed Tomography) or DEXA (Dual Energy X-ray absorptiometry). With these methods it is only possible to estimate density without any consideration the morphology of trabecular making parts like rods and plates.... 

Solving Nematodynamic equations with Lattice Boltzmann method is presented.We have studid the effect of shear flow on the direction of Director in different boundary conditions and different geometries.we simulated the 2D Nematic Fluid in simple shear with tangential and perpendicular anchoring and We saw nonliner effects on velocity profile when the anchoring of Nematic and boundary was perpendicular to the boundary.also we have investigated and presented the effect of shear velocity magnitude on the overall direction of Director.Also the effect of shear flow have studid for the Nematic between two hegzagons  

In this thesis we study an unexpected reverse spiral turn in the final stage of the motion of rolling rings. Equations of motion for rolling rings have been derived in the framework of Newtonian and Lagrangian mechanics, and solved in the presence of air drag forces and torques. The rolling motions of ellipsoids and disks have been used to validate the governing equations of motion. Based on experimental tests, we have found that the center of mass of rings moves in an S-shape trajectory. This is in contrast to spinning disks and coins that follow a spiral path before they stop. To explain this behavior, we included the effect of air drag in the equations of motions and found that the escape... 

Quantum computation is an unconventional way to compute employing quantum Physics. In this way of computation, quantum superposition and quantum entanglement have crucial roles to surpass common ways of computation. There is a special method for quantum computing which is known as “measurementbased quantum computation” (MBQC). In this method, sequential single-site measuring a highly-entangled state is used to perform computation. All of the existing MBQC models can be described in the “correlation space,” a virtual space corresponding to the physical space, of tensor network states. In this thesis, we introduce a recipe for designing such MBQC models. We elaborate our designing for... 

The primary objective of this thesis is twofold: First, the effect of soil-structure interaction (SSI) on the collapse probability of structures are studied. Second, the consequences of practicing the SSI provisions of two prominent seismic design guidelines, i.e., ASCE 7-10 and ASCE 7-16, on the performance of building structures are evaluated and compared. The analyses are conducted for a wide range of dimensionless parameters, which represent different structures on a variety of soil types. To compute the probability of collapse, incremental dynamic analyses are conducted in which In addition to ground motion variability, the uncertainties in the properties of the soil-structure systems... 

We study the problem of preclustering a set $B$ of imprecise points in~$\Reals^d$: we wish to cluster the regions specifying the potential locations of the points such that, no matter where the points are located within their regions, the resulting clustering approximates the optimal clustering for those locations. We consider $k$-center, $k$-median, and $k$-means clustering, and obtain the various results. Then we study the higher order Voronoi Tessellations as an important concept in clustering area. Generalizing Lee’s inductive argument for counting the cells of higher order Voronoi tessellations in $\Reals^2$ to $\Reals^3$, we get precise relations in terms of Morse theoretic quantities... 

Aggregation of membrane proteins plays a determinative role in many biological processes، such as signal transduction, cell division and endocytosis. In the present study, we have investigated the interaction between proteins in vesicles by means of coarse-grained molecular dynamics simulations. In the first step, a number of periodic lipid bilayers were simulated and their physical properties were calculated. Then, bilayers were immersed in water and converted into spherical vesicles via a selforganizing process . Finally two proteins were embedded into the vesicle and the potential of mean force (PMF) respect to the angle between them was obtained using umbrella sampling. This process was... 

Cancer is an abnormal growth of cells which is one of the major cause of worldwide’s mortality. Circulating Tumor Cells (CTCs) are rare cancer cells released from the primary or metastatic tumors and transported though the peripheral circulatory system and spreads in body and seize healthy organs. Early detection of CTCs can help in overtaking the cancer, hence isolation of CTCs is an essential step for many therapeutics. In spite of its clinical potential, the isolation and detection of CTCs has been a challenging task due to its rare presence amongst other blood cells (as low as 1–10 CTCs per billions of blood cells), similarity to white blood cell in size and also variability in terms of... 

After the discovery of integer and fractional quantum Hall effects, a comprehensive effort started to understand the physics behind these findings thoroughly. At the end, these efforts resulted in the introduction of topological phases of matter and the notion of topological phase transition. With the recent developments in this field, as the introduction and synthesis of 3D topological insulators, many researchers began inspecting the effects of disorders and impurities in the lattice structure on the topological phases, As these imperfections are inevitable in the lab-created instances. Since, in the previous works only on-site disorders was studied, the concentration of this thesis is on...