Sharif Digital Repository

The mechanism of gold nanowire (AuNW) and nanotube (AuNT) electrodeposition in a cyanide-free solution is investigated for the first time based on the analytical model of Szabo et al. (A. Szabo et al., J. Electroanal. Chem. 217 (1987) 417) for recessed cylindrical ultramicroelectrode (UME). Track-etched Polycarbonate Template (PCT) is served as cylindrical UME ensemble/arrays. Firstly, Au is nucleated through a charge transfer step and when the Nernst thickness exceeds the pore length, the radial diffusion is established around pore mouths. By overlapping of these domains, the planar diffusion toward the whole PCT surface is obtained. An analytic expression for global diffusion coefficient... 

The separation of water-oil mixtures has attracted widespread attention because of the increasing amounts of oily wastewater produced from the daily activities of humans and different industrial processes. Therefore, the development of facile and efficient oil-water separation technologies is imperative. In this work, a new highly superhydrophilic-superoleophobic coated stainless steel mesh was fabricated using virtue of the surface modification of poly (BzVimBr-Vim)@PFOA@SiO2 nanoparticles (NPs) through a facile preparation process. The new fabricated superhydrophilic and highly oleophobic coating exhibits good adhesive properties. The oil contact angle (OCA) and water contact angle (WCA)... 

A novel and simple photoelectrochemical (PEC) sensor to detect Cr(VI) based on screen-printed TiO2 modified with gold nanoparticles is presented. The proposed PEC sensor showed a very low detection limit (S/N = 3) of 0.004 μM, over a wide linear concentration range from 0.01 μM to 100 μM with a high sensitivity of 11.88 μA.μM-1 Cr(VI). Results also indicated good anti-interference and superb recovery in natural media application for Cr(VI) sensing  

A highly sensitive and selective sunlight-driven photoelectrochemical sensor for the direct detection and reduction of chromium(VI) was developed based on single crystal rutile titanium dioxide nanorods decorated with gold nanoparticles. Under sun simulator illumination via the amperometric technique, these Au decorated TiO2 photoelectrodes exhibited the highest sensitivity (13.94 μA μM−1) ever reported among Au-based electrodes for Cr(VI) detection, with a very low detection limit (S/N = 3) of 0.006 μM and wide linear concentration range from 0.01 μM to 50 μM. Measurements in real water samples such as laboratory and river water also showed excellent anti-interference and recovery... 

Oriented ZnO nanorods were grown directly on fluorine doped tin oxide substrates by a single bath electrodeposition process. A pulse potential at the beginning of growth improved the density and orientation of the nanorods. Pulse potential grown ZnO nanorod films showed better harvesting of visible light and enhanced the light driven water splitting performance in comparison to nanorods grown without any pulse potential. To further improve the water splitting activity, the nanorods were decorated with gold–palladium nanoparticles by sputtering. This caused visible light absorption to increase due to a plasmonic effect and the photoelectrochemical water splitting performance to further... 

Based on author Siavash Shahshahani's extensive teaching experience, this volume presents a thorough, rigorous course on the theory of differentiable manifolds. Geared toward advanced undergraduates and graduate students in mathematics, the treatment's prerequisites include a strong background in undergraduate mathematics, including multivariable calculus, linear algebra, elementary abstract algebra, and point set topology. More than 200 exercises offer students ample opportunity to gauge their skills and gain additional insights.
The four-part treatment begins with a single chapter devoted to the tensor algebra of linear spaces and their mappings. Part II brings in neighboring points to... 

LiNi0.8Co0.1Mn0.1O2 (NCM811) has been considered as a promising cathode for Li-ion batteries (LIBs) due to its high electrochemical capacity and low cost; however, poor cycling stability is one of the main restricting factors in industrial applications of the NCM811 cathode material. Notably, the capacity fading and low structural stability of NCM811 are intensified at elevated temperatures. ZrO2- and composite rGO-ZrO2-coated NCM811 were fabricated by a facile wet chemical method and evaluated at 25 and 55 °C to overcome these impediments. The ZrO2 coating provides superior cycling and thermal stability and perfectly protects the cathode active material from deleterious side reactions, and... 

Abstract: Here, the synthesis of TiO2 rutile nanorod arrays (TiO2 NRs) decorated with bimetallic gold–palladium cocatalyst nanoparticles (AuPd NPs) is described. The modified photoelectrode was characterized by field-emission scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive spectroscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, UV–vis spectroscopy, and electrochemical impedance spectroscopy (EIS). AuPd–TiO2 NRs (AuPd–TiO2) demonstrate high photocatalytic activity for photoelectrochemical (PEC) water splitting. The tailored structure of AuPd–TiO2 depicts a boosted photocurrent of 3.36 mA cm−2 under AM 1.5 illumination... 

In this paper, we report a promising sunlight-driven screen-printed TiO2 porous nanorods (PNR) photoanode decorated with Au plasmonic nanostructures for photoelectrochemical (PEC) light-to-electricity conversion. Fabricated photoanodes were characterized using field emission scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, X-Ray diffraction analysis, X-ray photoelectron spectroscopy, N2 adsorption-desorption isotherms, UV–vis spectroscopy and electrochemical impedance spectroscopy in detail. The Au-PNR-TiO2 photoanode demonstrates superior PEC activities both under simulated sunlight and visible light irradiation. Interestingly,... 

A surface to separate oil–water mixtures is a global concern and highly needed particularly in oil industries. The present study was conducted to create a novel superhydrophilic/superoleophobic nanocomposite coating on the stainless-steel mesh for the aim of oil/water separation. Different hydrophilic resins along with PFOA as oleophobic agent with 15 flours in its chemical structure and various oxide nanoparticles containing SiO2 and TiO2 at different concentrations were studied to achieve superhydrophilic/superoleophobic surface. The fabricated nanocomposites were fully characterized via field-emission scanning microscopy (FESEM), atomic force microscopy (AFM) and Fourier-transform... 

The aim of this paper is to study the influence of frequency in pulse electrodeposition, on the current efficiency, Ni content and surface morphology of deposits from a novel cyanide-citrate electrolyte with 20 mM gold as KAu(CN) 2 and 7 mM NiSO 4, with the aim of design of experiment by respond surface method (RSM). Frequency was in the range of 1-200 Hz in constant average current density, temperature, and duty cycle of 7 mA/cm 2, 59 °C and 55% respectively. Composition of the deposits was determined by atomic absorption spectroscopy (AAS). Additionally, deposits were characterized by scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDS). It was shown that from... 

In this study, failure of a high pressure economizer tube of a boiler used in gas-Mazut combined cycle power plants was studied. Failure analysis of the tube was accomplished by taking into account visual inspection, thickness measurement, and hardness testing as well as microstructural observations using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and x-ray diffraction (XRD). Optical microscopy images indicate that there is no phase transformation during service, and ferrite-pearlite remained. The results of XRD also revealed Iron sulfate (FeSO4) and Iron hydroxide sulfate (FeOH(SO4)) phases formed on the steel surface. A considerable amount of Sulfur was also... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

In-situ deposition of cupric oxide (CuO) thin films on fluorine-doped tin oxide is performed through a rapid microwave-assisted method. The duration of microwave (MW) irradiation is optimized in order to prepare efficient and stable photocathodes for photoelectrochemical (PEC) water splitting. We obtain CuO with a unique morphology consisted of intermingled nanosheets. We evaluate PEC performance of the photocathodes through Linear Sweep Voltammetry (LSV) and current stability analyses. The highest achieved photocurrent density is -1.15 mA.cm-2 at 0 V vs. RHE for the sample MW-irradiated for 60 min. This value is comparable or superior to several other CuO-based photocathodes prepared by... 

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained...