Sharif Digital Repository

Deteriorated old urban neighborhoods usually have no access to appropriate municipal services, and have small-sized buildings, densely populated areas, and earthquake-prone structures. Residents in these areas do not have the will and financial ability to renovate their aged properties. A questionnaire survey of the citizens living in the deteriorated areas of the City of Tehran showed that 80% of households do not have a positive monthly financial balance and cannot afford the cost of reconstructing their properties. Serious drawbacks of previous attempts to renovate deteriorated areas, including lack of adequate government funding, and adding to the dependence of local citizens on... 

The Brushless Doubly-Fed Machine (BDFM) is a machine which incorporates the robustness of the squirrel cage induction machine and the speed and power factor control of a synchronous machine. All of these advantages are obtainable from a relatively low rating power electronic converter (e.g. 30 % of the machine’s rating). The stator of a BDFM is furnished with two balanced three phase windings of conventional design (power and control winding). These windings differ in pole number and are often excited at different frequencies. Hence, there is no direct magnetic coupling between them. The power winding is connected to a constant-voltage, constant-frequency source and the control winding is... 

In this thesis, concerning Eigenstrain Theory, the micromechanical formulation of dental implants has been derived for the first time in the fields of Mechanics and Medical Science. The proliferation of using dental implants as a prosthesis for the people who lost their teeth because of poor maintenance and smoking cigarette results in scientists think more about the design of these implants and their stress fields inside the mandible. It is crystal clear that these stress fields cause stress shielding, which is a phenomenon that brings about bone loss or decrement in the bone density. Hence, if we know the stress that is produced by the implants inside the mandible, we can optimize the... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel... 

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

In real-time systems, jobs that miss their deadline are considered worthless or ineffective. Nowadays, real-time applications (such as multimedia) that communicate through software-defined networks (SDN) are widely used and will continue to expand in the future. SDN is an emerging network architecture in which control plane is separated from data plane to manage it directly. In this research, we make changes to the controller and the switch used in such network to deliver real time packets or real-time flows (such as video) on time, as much as possible. As missed deadline packets are worthless and they waste bandwidth, dropping them is a solution. Moreover, the controller can drop flows that... 

The increasing number of road accidents and fatalities have yielded the introduction of several solutions by related industries such as automobile manufacture. Proposed solutions can be classified into two categories: passive, such as airbags, and active such as ABS ad ITS-based technologies. Inter vehicles communication let the communication between vehicles(V2V) or between vehicles and road infrastructure (V2I) by relying on DSRC technology and standards. Intelligent Transportation System (ITS) has three main types of applications namely safety, traffic and commercial. Safety applications are the main goal of vehicular communication, and real time guarantee in safety applications is so... 

Nowadays, one of the problems of network designers and users is the correctness of network equipment functionality. Since routers play an important role in information transfer between various networks and communicate with each other through a routing protocol, any violation of such protocol can result in the network's failure or defective transfer of data. Thus, being assured of the conformance of the implemented protocol in a router with what has been defined in the protocol's standard is of great significance. To this end, before using or exposing a router, network equipment testers should run protocol conformance tests on it and insure its correct functionality. This brings up the... 

In order to increase the network performance, to discover network security threats, to guarantee the quality of services, to simulate networks and develop new network protocols, network designers and operators need software tools to analyze the network traffic. The first step to do this analysis is network monitoring. This can be done by using various software and hardware tools.
In this research we developed a tool which analyzes the network traffic using appropriate statistical methods. The models which are analyzed in this application are: Poisson, Self-similar and Weibull. This application analyzes the network traffic based on this statistical models and calculates their parameters.... 

Network Function Virtualization (NFV) is a new paradigm in computer networks for implementing network functions on general-purpose common-of-the-shelf processors. The revolutionized NFV architecture has shown to be a suitable replacement for hardware middleboxes. NFV is in high demand because of its lower costs, increased flexibility, and more scalability. However, the ever-growing volume of network traffic and increased data transfer speed in computer networks have made achieving high performance the major issue in this area. With thousands of processing cores and high memory bandwidth, Graphical Processing Units (GPUs) are potentially an appropriate solution to accelerate network... 

The present study is aimed at the development of a novel approach based on the magnetically improvement of DNA-directed immobilization to prepare a highly efficient sensor for prostate diagnosis. The novelty of this work is in the use of antibody conjugated magnetic nanoparticles via DDI. DNA-modified magnetic nanoparticles are added in solution to capture DNA-conjugated, fluorescently-labeled immunocomplexes formed in solution free of steric constraints. The DDI-based nanoconstructs are then concentrated and immobilized using a magnetic field. Compared to a process in which the immunocomplex directly forms on the sensing surface, the proposed approach provides higher mass transfer and lower... 

Recent advancement in wireless communications, electronics, low power design and also tendency to use high performance low cost products have led to emergence of Wireless Sensor Networks (WSNs). As the main purpose of a WSN is information gathering and it’s transmission to the sink node, the main problem is to deliver information correctly with minimum energy consumption. Besides, whereas the majority of developed applications for WSNs are event-critical applications, achieving reliable data transfer as the main factor of dependability and quality of service seems vital. However, data transmission is unreliable over multi-hop WSN due to the unreliability of wireless links and node failures. ... 

In this research, Friction stir welding (FSW) of 7075-O and 7075-T6 aluminum alloys was performed to investigate the effects of the base material conditions, effects of process parameters on the FSW characteristics and optimum parameters which lead to best mechanical properties of joints. The experimental results indicated that the base material condition has a significant effect on weld morphologies, weld defects, and mechanical properties of joints. The optimum parameters were 1230 rpm and 60 mm/min for 7075-O and 1230 rpm and 100mm/min for 7075-T6. Also, Double welded friction stir welding of 7075 aluminum alloy was performed to investigate the effects of the second pass of weld on the... 

Wireless sensor networks (WSNs) are tiny devices with limited computation and power supply. For such devices, data transmission is a very energy-consuming operation. Data aggregation eliminates redundancy and minimizes the number of transmissions in order to save energy. This research explores the efficiency of data aggregation by focusing on different aspects of the problem such as energy efficiency, latency and accuracy. To achieve this goal, we first investigate data aggregation efficiency with constraint on delay, which can be compatible with other important system properties such as energy consumption and accuracy. By simulation, we will show that, depending on the application, we can... 

Up to now two kinds of hardware have been used in routers: ASIC processors or general purpose processors. These two solutions have their own flaws. ASIC hardwares are fast but they are not flexible for implementation or development of new applications. And general purpose processors are not fast enough for fast data rate of network. On the other hand, there is an ever increasing gap between the memory access speed and network data rate. At this time the main bottleneck in packet processing systems is memory. For solving this problem, two groups of solution have been introduced. The first group tries to reduce the demand for memory by using cache or longer system words. The second group uses...