Sharif Digital Repository

Today polyolefin definitely is one of the most applicable polymers in the world. One of these polymers is ultra-high molecular weight polyethylene. Being applicable in a number of high-tech industries such as military service, battery separators, and other areas, expands the usage of these polymers. Electrospinning is one of the molding methods in order to synthesize fiber polymers. Using this method, a great deal of polymer fibers have been prepared. It is worth noting that the device used for olefins should have temperature control and temperature increase ability. The electrospinning device with the temperature control has not been built in the country; therefore, this device has been... 

In this work, wool keratin/polyethylene oxide (PEO) nanofibrous scaffolds were fabricated by electrospinning method. Bacterial cellulose nanofibrils (BCNFs) were embedded in the electrospun keratin/PEO nanofibers. Incorporation of BCNFs into the nanofibers enhances their hydrophilicity, mechanical properties and cell viability, adhesion and proliferation. Water contact angle of the nanofibers decreased from 126˚ to 83˚by addition of 1 wt % BCNFs. A thermogelling hydrogel based on carboxylated pluronic (Pl-COOH) and gum tragacanth (GT) was fabricated and polymer conjugation was confirmed by FTIR and H-NMR spectroscopy. Morphological and viscoelastic properties of GT-grafted Pl-COOH hydrogels... 

Deployable structures have been used on small satellites since the beginning of such space programmes. Here, the design sequence for a special tensegrity structure, for use as supporting structure for deployable mesh-like antenna will be proposed. The design process is conducted to prevent structural elements from failure, and satisfy the minimum specified natural frequency. In this research, structural modeling is performed based on two external geometric parameters (overall height and diameter), and three internal geometric parameters (elements cross-section properties). The pre-stress in structural element is the last design parameter. Also, materials are pre-assigned. Internal forces of... 

Processalgebras,acompositionalmethodofmodelingsystemsandtheirbehavioural features, have been a key instrument in the verification of systems and have strived to completely span a whole spectrum of verification solutions for diverse areas of applications. In this sense, modeling and analysis of the performance metrics in a Mobile Ad hoc Network (MANET) in contrast to other systems, face different challenges which demand different strategies. Hence, our goal here is to model and analyze the qualitative and quantitative aspects of MANETs within one especially designed compositional framework. To achieve this framework, we will first have a look at the different methods which aim to model MANETs... 

Application of composite patches in repair of damaged/aged aircraft structures is one of the most popular repairing methods in aerospace engineering and because of its advantages the use of this type of repair is increasing today. However, to use these patches in life extension of aged aircraft, the added weight to the structure should be strictly controlled. This could be best done if achieving the optimum and smart design by using optimization and structural health monitoring methods. These two concept about pre-designed of composite patch repair are investigated in this thesis. The simulation by Abaqus software and experimental results and tests will be used for this purpose. In first... 

In this research work, the concept of an unmanned aerial firefighting system with water thrusters has been studied. This system consists of a platform head, a waterhose and a ground pump. The concept is briefly to pump water through the hose and then fall it down on fire from the platform. This conceptual system may have many other applications. The other applications have also been addressed in the introduction section. This platform can be considered as an unmanned aerial vehicle whose lift and control forces is provided by water thrusters. The conceptual study has been carried out based on three subjects of preliminary sizing, system dynamic modeling and controller design for platform... 

In this thesis we construct a bounded translation of intuitionistic predicate logic into Basic predicate logic with restricted use of universal quantifier and without equality inspired by papers [1] and [2]  

The X-ray attosecond pulses have many useful applications for studying atomic and sub-atomic scales phenomena in attosecond scale duration. Generation and optimization of high-order harmonics is an efficient way to produce such attosecond pulses which are studied in this thesis. There are several limitations in the attosecond pulse generation such as low efficiency of high-order harmonics, long duration of output pulses and the impossibility of producing an attosecond pulse with any desired wavelength in the x-ray region. Therefore, more investigations into high harmonic generation and fully control and optimization of this process is significant. In this thesis, high harmonic generation... 

A Brain-Computer Interface (BCI) is a communication system that does not need any peripheral muscular activity. The huge goal of BCI is to translate brain activity into a command for a computer. One of the most important topics in the brain-computer interface is motor imagery (MI), which shows the reconstruction of subjects. The electrical activities of the brain are measured as electroencephalogram (EEG). EEG signals behave as low to noise ratio also show the dynamic behaviors.In the present work, a novel approach has been employed which is based on feature extraction with discretion wavelet transform (DWT), support vector machine (SVM), Artificial Neural Network (ANN) and Convolutional... 

Today, the use of carbon nanostructures hybridized with noble metals has attracted considerable attention for the fabrication of bio-electrochemical sensors. Since the specific surface area has an immense effect on the sensing response, three-dimensional structures of graphene have a great capability to utilize in these sensors. In this research, three-dimensional graphene was provided on the porous nickel foam by chemical vapor deposition technique. By evaluation of raman spectroscopy, the time period of 20 minutes for solving of the carbon atoms into the nickel foam was selected as the main parameter of optimized conditions for the synthesis of graphene. Afterward, production of few-layer... 

Nitrite (〖NO〗_2^-) anions are ubiquitous within the physiological, industrial, environmental, and food industries. The potential toxicity risk of these inorganic compounds has well been recognized; thus, the precise detection of these ions by developing reliable and high-throughput analytical methods is crucial for health and environment security. In this study, we present a reagentless electrochemical biosensor using cobalt-based metal-organic frameworks (ZIF-67) and gold nanoparticles (Au NPs) for determination of nitrite ions. The developed biosensor provides the advantages of MOF properties including high surface area, hierarchical porosity, and tunable functionalities along with high... 

In the present study, an incompressible smoothed particle hydrodynamics based on the artificial compressibility method is applied for simulating the incompressible turbulent flows. The Reynolds-averaged incompressible Navier–Stokes equations using the artificial compressibility method in the Eulerian reference frame are written in the Lagrangian reference frame to provide an appropriate incompressible SPH algorithm for the turbulent flow computations. Here, the k-L_m turbulence model, which is a simplified k-ϵ turbulence model, is used and formulated in the Lagrangian reference frame. The SPH formulation implemented here is based on an implicit dual-time stepping scheme to be capable of... 

Concept drift is a common situation in data streams where distribution which data is generated from, changes over time due to various reasons like environmental changes. This phenomenon challenges classification process strongly. Recent studies on keeping a pool of classifiers each modeling one of the concepts, have achieved promising results. Storing used classifiers in a pool enables us to exploit prior knowledge of concepts in the future occurrence of them. Most of the methods presented so far, introduce a similarity measure between current and past concepts and select the closest stored concept as current one. These methods don’t consider possible relations and dependenies between... 

Buckling-Restrained Braced Frame system (BRBFs) are a new type of steel seismic-load-resisting system that has found use in several countries because of its efficiency and its promise of seismic performance far superior to that of conventional braced frames. The system is addressed in the 2005 edition of the AISC Seismic Provisions for Structural Steel Buildings, also a set of design provisions has been developed by NEHRP. This thesis illustrates the seismic design of buckling-restrained braced frames and compares its seismic performance with the performance of ordinary bracing systems. This work investigates the advantage and disadvantages of this new type of seismic resisting. By having...