Sharif Digital Repository

Hemodynamic factors, such as Wall Shear Stress (WSS), play a substantial role in arterial diseases. In the larger arteries, such as the carotid artery, interaction between the vessel wall and blood flow affects the distribution of hemodynamic factors. In the present study, both rigid-wall and deformable-wall models are developed in a 3D numerical simulation to assess the effectiveness of arterial rigidity on worsening hemodynamics, especially WSS. Two different rheological models (Newtonian and CarreauYasuda) have been employed to evaluate the influence of blood, non-Newtonian properties, as well. The importance of vessel wall deformability was compared with the rheological model of blood.... 

The Cauchy-Born (CB) hypothesis has been widely used in multi-scale modeling of crystalline nano-structures. The violation of CB hypothesis in stress space and the transition to plasticity, which is equivalent to the violation of CB hypothesis in strain space, are generally confused and it becomes crucial to differentiate between the two distinct phenomena; the violation of the former usually occurs at high values of stress and at regions where the surface effects are manifest while the violation of the latter occurs at low stresses when the material loses its strength to tolerate the applied loading. In this paper, a novel technique is developed to investigate the validity of CB hypothesis... 

The Cauchy–Born (CB) hypothesis has been widely used in multi-scale modeling of crystalline nano-structures. The violation of CB hypothesis in stress space and the transition to plasticity, which is equivalent to the violation of CB hypothesis in strain space, are generally confused and it becomes crucial to differentiate between the two distinct phenomena; the violation of the former usually occurs at high values of stress and at regions where the surface effects are manifest while the violation of the latter occurs at low stresses when the material loses its strength to tolerate the applied loading. In this paper, a novel technique is developed to investigate the validity of CB hypothesis... 

In this work, a numerical-based model has been proposed to calculate distributions of temperature, strain and strain rate during hot rolling as well as the subsequent microstructural changes after hot rolling of an aluminum alloy. For doing so, a transient finite difference analysis together with a stream function method have been coupled to calculate temperature distribution and velocity field within the rolling metal. A new approach considering internal state variables method has been employed to predict the kinetics of static recrystallization after hot rolling. The predicted results were then compared with the experimental ones and a good consistency was observed between the two sets of... 

In this work, a mathematical model has been developed to predict distributions of temperature, strain and strain rate during hot rolling as well as the subsequent microstructural changes after hot deformation. For doing so, a 2-D finite element analysis together with a stream function method have been coupled to calculate temperature distribution and velocity field within the rolling metal while the roll force has been estimated, through using an upper bound solution. Also the additivity rule and Avrami-type equation have been employed to predict the kinetics of static recrystallization after hot rolling. The model has been examined on AA5083. Hot rolling experiments have been conducted... 

To explore the role of hemodynamic in the initiation and progression of stenosis in carotid artery bifurcation, a Computational Fluid Dynamics (CFD) technique is applied. The effect of four rheology models is investigated as well as various mechanical phenomena. In this study, a Finite Element Method (FEM) was applied to simulate the physiologic Circumferential Strain/Stress (CS) Meanwhile, to investigate the role of vessel wall flexibility, a Fluid-Structure Interaction (FSI) analysis was applied. It was concluded that velocity profiles and WSS show sensitivity to arterial wall stiffening while shear thinning models do not have a dominant effect on the flow field  

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages