Sharif Digital Repository

There is a substantial volume of mobile phone waste every year. Due to the disadvantages of traditional methods, it is necessary to look for biological processes that are more eco-friendly and economical to recover metals from e-waste. Fungi provide large amounts of organic acids and dissolve metals but using sucrose in the medium is not economical. In this paper, the main objective is to find a suitable alternative carbon substrate instead of sucrose for fungi bioleaching of Ni and Cu in printed circuit boards (PCBs) of mobile phones using Penicillium simplicissimum. Four kinds of carbon sources (including sucrose, cheese whey, sugar, and sugar cane molasses) were selected. Also, pH and... 

Statistically based experimental designs were applied to screen and optimize the bioleaching of spent hydrocracking catalyst by Penicillium simplicissimum. Eleven factors were examined for their significance on bioleaching using a Plackett-Burman factorial design. Four significant variables (pulp density, sucrose, NaNO3, and yeast extract concentrations) were selected for the optimization studies. The combined effect of these variables on metal bioleaching was studied using a central composite design (CCD). Second-order polynomials were established to identify the relationship between the recovery percent of the metals and the four significant variables. The optimal values of the variables... 

Azo dyes are common dye groups widely used in different industries. Industrial effluents which contain these dyes pervade water resources and have various known and unknown physiological effects on living organisms. In this study, methyl red (MR) was proposed as a model azo dye to examine the capability of Saccharomyces cerevisiae ATCC 9763 for cleavage of the azo bond leading to decolourization. The spectrophotometry method showed that complete decolourization occurred statically during ≃12 h and this time reduced to several minutes less than 10 min where cell mass increased. Thin layer chromatography (TLC), mass spectroscopy and Fourier transform infrared (FTIR) confirmed degradation of... 

The supernatant obtained from the extracellular laccase produced by Phanerochaete chrysosporium was used as the enzyme source to conduct a partial purification, characterization and dye decolorization study. The partially purified enzyme was stable in the pH range of 3–5 and showed an optimum activity at pH 4.0, using guaiacol as a substrate. Laccase stability of pH was determined and discovered to retain 100% of its activity at a pH of 4.0 after 2 h. The maximum enzyme activity was obtained between 30 and 50 °C. The maximum velocity and Michaelis constant were calculated as 3.171 µM−1·min and 1628.23 µM, respectively. The enzyme was activated by Fe2+, Zn2+, Ca2+ and Cu2+, while Hg2+, Mn2+,... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature 40... 

Dyes have different categories, and each is used in one of the industries according to its appearance and physical characteristics. Dyes have severe toxicity and carcinogenic effects, which in water effluents contaminates the aquatic system and threatens other parts of the ecosystem and humans. Dye removal using absorption and photocatalytic properties has been the subject of various fundamental researches. Graphitic carbon nitride (g-C3N4) as a photocatalyst is a good choice because of its many excellent features, like adjustable optical band gap and excellent chemical and thermal stability. Although this catalyst has great potential to eliminate contamination, its use is limited because of... 

The effect of Solid State Fermentation (SSF) on Chitosan production by A. niger was investigated. A. niger BBRC 20004 from Biochemical and Bioenvironmental Research Centre of Sharif University of Technology (Tehran, Iran), was grown on corn residue. Chitosan was extracted from the fungal mycelia using hot alkaline and acid treatment. A. niger was incubated for 12 days on corn residue with moisture content of 35 % and 1.12 % of nitrogen. The Chitosan was obtained and 10.9 g/kg of Urea dry residue was added in various amounts to the medium in order to evaluate the effect of the nitrogen concentration in the production of Chitosan. The highest amount of Chitosan obtained by 6.5 g of urea after... 

The effect of glucose concentration in submerged fermentation (SMF) on chitosan production by Aspergillus niger was investigated. A. niger, BBRC, 20004, from the Biochemical and Bioenvironmental Research Centre at Sharif University of Technology, Tehran, Iran, was grown in a Sabouro Dextrose media. Chitosan was extracted from the fungal mycelia using hot alkaline and acid treatment and after 12 days of cultivation, 0.8455 g chitosan /l of the fermentation medium was obtained. The content of glucose in the Sobouro Dextrose Broth media was also changed and the highest yield of chitosan 0.9121 g/l was obtained in Sobouro Dextrose Broth media containing 8% glucose. © Sharif University of... 

In this article, bioleaching of computer printed circuit boards (CPCBs) was examined using Aspergillus niger with one-step, two-step, and spent-medium bioleaching methods. Four effective parameters were optimized using response surface methodology (RSM) to achieve maximum recovery of Cu and Ni. Under optimal conditions – pH of 5.15, pulp density of 10 g/l, 1E+007 spores of A.niger, and 4.5 days for the sample adding time − 97% and 74% of Cu and Ni were recovered, respectively. Two-step bioleaching and spent medium bioleaching were respectively identified as the best methods for maximizing Cu and Ni recovery. Fungi deteriorate the sample mainly by it is chemical action like producing acids.... 

The effects of bioaugmentation on maintaining the conventional activated sludge (CAS) system stability under shock loading conditions, standardizing the effluent, and improving the sludge settlement, were studied. Phenol was chosen as a model of mono-aromatic compounds, which are commonly found in the wastewaters of petroleum refineries and petrochemical industry in Iran. Bioaugmentation is a practical means to increase the resistance of a CAS system against shock loadings of recalcitrant compounds. It is also effective in removing hazardous compounds according to recommended standards. By using this method, there is no need to change CAS system construction, thus, it can be used simply and... 

Effect of several auxiliary carbon sources such as crude oil, different precultures, and quality of adding crude oil in treatment of petroleum wax deposits by an isolated bacterial strain, BBRC9012, was investigated. First and second experiments which compered effect of molasses, glucose and crude oil, indicated that glucose and molasses causes more microbial growth, biosurfactant production and bioemolsification than crude oil. Both optometry and Surface tension measurements showed that using molasses-BHB preculture for wax treatment is not suitable and when crude oil is used as auxiliary carbon source a one day lag phase is unavoidable. It was also shown that when crude oil is added to... 

Mobile phones are known as the most widely used electronic instruments, and an enormous number of discarded mobile phones are generated. The present work used a pure culture of Penicillium simplicissimum in a bubble column bioreactor to extract Cu and Ni from mobile phone printed circuit boards (MPPCBs) waste. Molasses was used as an efficient carbon source to enhance bioleaching efficiency and increase the cost benefits. The adaptation phase was done at Erlenmeyer flasks to reach 40 g/L of MPPCBs powder. The most significant parameters, including the mass of MPPCBs powder, aeration, molasses concentration, and their interaction, were optimized in order to leach the maximum possible Cu and... 

An enormous amount of catalysts are consumed in oil refineries during refining processes. The batch bioleaching kinetics of spent hydrocracking spent catalyst was investigated. Four significant factors in bioleaching, i.e., pH, pulp density, inoculation, and elemental sulfur, were realized among 10 key factors using Plackett-Burman factorial design. The best conditions for getting maximum efficiency in bioleaching process were determined. Second-order polynomial models were also developed to find the impact of four variables on metal recovery. The predicted recoveries from these models agreed with experimental results in optimal conditions for aluminum, molybdenum, and nickel. Diffusion... 

The kinetics of bioleaching of Mo, Ni, and Al from spent hydrocracking catalyst, using Aspergillus niger was studied. The four most effective bioleaching variables were selected in accordance with the Plackett-Burman design and were further optimized via central composite design (CCD). The optimal values of the variables for maximum multi-metal bioleaching were as follows: particle size 150-212. μm, sucrose 93.8. g/L, pulp density 3%. w/v, and pH 7. The maximum metal recoveries corresponding to these conditions were 99.5 ± 0.4% Mo, 45.8 ± 1.2% Ni, and 13.9 ± 0.1% Al. The relatively low Ni extraction was attributed to the precipitation of Ni in the presence of oxalic acid. Under the optimal... 

Fermentation systems are often highly nonlinear, with poorly understood dynamic behaviour of the reactor. In this work, mathematical modeling of the fermentation process based on aeration rate control was performed in a semi-batch airlift loop bioreactor. The bioconversion of glucose to gluconic acid by the Aspergillus niger strain was considered in an oxygen consuming system in the liquid phase. The proper kinetic model for the bioconversion of glucose to gluconic acid was investigated using experimental data from a 40 dm3reactor. Kinetic parameter estimation was used from the literature. The model was validated by experimental data and was compared with the Monod kinetic model. The... 

In this study, effects of solid concentration, temperature, and initial Fe2+ concentration on bioleaching of sulfide mineral (chalcopyrite) obtained from Sarcheshmeh Copper Mine in the region of Kerman located in the south of Iran were investigated. A mesophilic iron oxidizing bacterium, Acidithiobacillus ferrooxidans has been isolated from a typical chalcopyrite copper concentrate of the mentioned mine. Bioleaching experiments were carried out in two batch air-lift bioreactors with recycling stream. One reactor contained 2 liters of medium and 10% (v/v) inoculum while in the other reactor, control bioleaching tests were carried out with sterilized concentrate without inoculum by the... 

In this study Fe3O4/CMC magnetic nanoparticles were synthesized through co-precipitation method. Afterward, laccase from Trametes hirsuta was immobilized onto Carboxymethyl cellulose (CMC)-coated magnetic Fe3O4 nanoparticles by covalent bonding between carboxyl groups of carboxymethyl cellulose and amine group of laccases. Also, the resulted magnetic nanoparticles and immobilized laccase were characterized by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and dynamic light scattering (DLS) analysis. Moreover, the vital factors in enzyme immobilization, such as contact time, amount of N-hydroxysuccinimide (NHS), and the amount of nanoparticles were... 

Optimization based on appropriate parameters can be applied to improve a process. Mazut degradation as a critical issue in environment requires optimization to be efficiently done. To provide biodegradation conditions, experiments were designed on the least interactions among levels of parameters consisting of pH, Tween 80, glucose, phosphorous source, nitrogen source, and time. Kinetic constants and biomass were calculated based on 16 assays, designed using Taguchi method, which constructed various mazut biodegradation conditions. Kinetics of mazut degradation by newly isolated bacteria Enterobacter cloacae closely followed second order kinetic model. Results of the 16 experiments showed... 

Using whole cell as a catalyst of enzymatic transesterification is a method to produce biodiesel with fewer drawbacks and at a lower cost. In the present study, biodiesel was produced by the reaction of waste frying oil with methanol in the presence of Rhizopus oryzae PTCC 5174 in both immobilized and free forms. Effect of four influencing factors including temperature, methanol to oil molar ratio, amount of biomass, and shaking speed was investigated. Response surface methodology was used to find the optimum conditions of the transesterification reaction. Each factor was set at three levels and the yield of the biodiesel was considered as the response. A quadratic equation was well-fitted...