Sharif Digital Repository

This paper presents a new landslide-generated wave (LGW) model based on incompressible Euler equations with Savage-Hutter assumptions. A two-layer model is developed including a layer of granular-type flow beneath a layer of an inviscid fluid. Landslide is modeled as a two-phase Coulomb mixture. A well-balanced second-order finite volume formulation is applied to solve the model equations. Wet/dry transitions are treated properly using a modified non-linear method. The numerical model is validated using two sets of experimental data on subaerial and submarine LGWs. Impulsive wave characteristics and landslide deformations are estimated with a computational error less than 5 %. Then, the... 

Landslide-generated waves (LGWs) are among natural hazards that have stimulated attentions and concerns of engineers and researchers during the past decades. At the same period, the application of numerical modeling has been progressively increased to assess, control, and manage the risks of such hazards. This paper represents an overview of numerical studies on LGWs to explore associated recent advances and future challenges. In this review, the main landslide events followed by an LGW hazard are scrutinized. The uncertainty regarding landslide characteristics and the lack of data concerning generated tsunami properties highlights the necessity of probabilistic analysis and numerical... 

In this work, impulsive wave generation and propagation generated by landslides are studied numerically for a real case. Maku dam reservoir, in the northwestern of Iran is considered as the case study. Generated wave heights, wave run-up, maximum wave height above the dam crest and the probable overtopping volume have been evaluated, using a two-dimensional numerical model (LS3D). This model is validated using available three-dimensional experimental data for simulating impulsive wave caused by sub-aerial landslides. Based on the results, the generated wave height for first and second scenarios are 12 m and 18 m respectively. The wave height of 8 m is observed close to dam body. Because of... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

This paper presents a new landslide-generated wave (LGW) model based on incompressible Euler equations with Savage-Hutter assumptions. A two-layer model is developed including a layer of granular-type flow beneath a layer of an inviscid fluid. Landslide is modeled as a two-phase Coulomb mixture. A well-balanced second-order finite volume formulation is applied to solve the model equations. Wet/dry transitions are treated properly using a modified non-linear method. The numerical model is validated using two sets of experimental data on subaerial and submarine LGWs. Impulsive wave characteristics and landslide deformations are estimated with a computational error less than 5 %. Then, the... 

This paper represents a numerical study on the effects of landslide initial submergence and its geotechnical and rheological properties on the characteristics of landslide-generated waves (LGWs) and landslide deformation. A number of 117 numerical experiments are performed using a two-layer Coulomb Mixture Flow (2LCMFlow) model on a real-sized numerical flume as a simplified cross section of the Maku dam reservoir, located in the Northwest of Iran. Three different initial locations are considered for landslide representing a subaerial (SAL), a semi-submerged (SSL), and a submarine (SML) landslide. Based on the numerical results, the majority of SMLs and in some cases SSLs generate tsunami... 

This paper introduces a well-balanced second-order finite volume scheme, based on the Q-scheme of Roe, for simulating granular type flows. The proposed method is applied to solve the incompressible Euler equations under Savage-Hutter assumptions. The model is derived in a local coordinate system along a non-erodible bed to take its curvature into account. Moreover, simultaneous appearance of flowing/static regions is simulated by considering a basal friction resistance which keeps the granular flow from moving when the angle of granular flow is less than the angle of repose. The proposed scheme preserves stationary solutions up to second order and deals with different situations of wet/dry... 

In this work, a two-dimensional fourth-order Boussinesq-type numerical model is applied to estimate the impact of landslide-generated waves in dam reservoirs. This numerical model has recently been extended for simulating subaerial landslides. The extended model is validated using available three-dimensional experimental data, and a good agreement is obtained. The numerical model is then employed to investigate the impact of landslide-generated waves in two real cases, the Maku and Shafa-Roud dam reservoirs in the northwestern and the north of Iran, respectively. Generated wave heights, wave run-up, maximum wave height above dam crest, and dam overtopping volume have been estimated for each... 

An artificial neural network to predict the fatigue life, residual stress and Almen intensity of shot peened alloy Ti6Al4V ELI was developed. To minimize the prediction error, a feed forward model was used and the neural network was trained with back-propagation learning Algorithm. The results of this investigation show that a neural network with one hidden layer and five neurons in this layer will give the best performance. With this structure the network approaches to the desired error in the least time. Furthermore, it was concluded that there is a good agreement between the experimental data, the predicted values and the well-trained neural network. Therefore, the neural network has a... 

Electroosmosis is the main mechanism for flow generation in lab-on-a-chip (LOC) devices. The temperature rise due to the Joule heating phenomenon, associated with the electroosmosis, may be detrimental for samples being considered in LOCs. Hence, a complete understanding of the heat transfer physics associated with the electroosmotic flow is of high importance in design and active control of LOCs. The objective of the present study is to estimate the temperature rise and the thermal entry length in electroosmotic flow through rectangular microchannels, having potential applications in LOC devices. Along this line, the power-law rheological model is used to account for non-Newtonian behavior... 

This study presents a comprehensive investigation on hydrodynamic and thermal transport properties of mixed electroosmotically and pressure driven flow in microtubes. Particular emphasis is given to investigating the combined consequences of viscous dissipation, non-uniform Joule heating, and variable thermophysical properties. Analytical solutions are obtained using the Debye-Hückel linearization and constant fluid properties assumption, while a numerical solution is presented for variable fluid properties and non-uniform distribution of Joule heating. The results indicate that, viscous heating effect is pronounced significantly when a favorable pressure gradient exists and cannot be... 

The Mapping and Modeling Subcommittee of the US National Tsunami Hazard Mitigation Program convened a workshop in January 2017 to evaluate the present state of numerical models for the simulation of tsunamis generated by submarine or subaerial landslides. A range of benchmark tests were provided to participants, with three tests emphasized: (i) a laboratory submarine solid slide in a 2D horizontal tank, (ii) a laboratory submarine granular slide in a 1D flume, and (iii) a field case based on submarine slides which occurred in Port Valdez, AK during the 1964 Alaska earthquake. Nine landslide tsunami models configured with 21 different combinations of physical options were benchmarked,... 

Simplicity and validity are recognized as important attributes of an effective simulation model. However, some disagreement exists both on the definitions of these concepts and on quantitative measures for them. This paper introduces Enrichment Level (EL) for (simulation) models. The EL is a quantitative measure to compare the effectiveness of alternative models when used in a particular project. While there is no conceptual restriction on expanding the EL, it currently captures the bias, speed, variance, and scope of a model as the main contributing enrichment factors. This paper explores these factors and suggests a utility-based method to combine them according to the relative importance... 

In this paper we first obtain the order of stress singularity for a dynamically propagating self-affine fractal crack. We then show that there is always an upper bound to roughness, i.e. a propagating fractal crack reaches a terminal roughness. We then study the phenomenon of reaching a terminal velocity. Assuming that propagation of a fractal crack is discrete, we predict its terminal velocity using an asymptotic energy balance argument. In particular, we show that the limiting crack speed is a material-dependent fraction of the corresponding Rayleigh wave speed  

An aqueous two-phase system (ATPS) containing polyethylene glycol (PEG) and potassium phosphate (K2HPO4) was used for partitioning and partial purification of alkaline protease produced by Bacillus licheniformis ATCC 21424. The effect of PEG molar mass, pH and concentration of NaCl salt addition on partition coefficient, yield and purification factor (PF) for ATPS were studied. The highest partition coefficient (5.3) was achieved in an ATPS of 25% (w/w) PEG 10,000 (g/mol) and 10% (w/w) NaCl at pH 9. Cation and anion exchange chromatography was employed for purification of alkaline protease from protein mixture and the yield and PF for enzyme fractions were obtained to make a comparison...