Sharif Digital Repository

Development of high frequency power electronic devices leads to high performance and flexible switch mode AC voltage stabilizers instead of traditional electromechanical types. This paper introduces a novel double stage topology for switch mode AC voltage regulators. The system produces a continuous adjustable isolated AC voltage providing a constant output voltage for sensitive loads. In order to simplify the control strategy, a symmetrical PWM is used. In contrast with conventional AC choppers, the proposed circuit does not need any snubber circuits or voltage and current sensors which leads to a simpler and more reliable circuit. Detailed analysis and simulation results show the... 

In joint-use corridors where both pipelines and AC electric transmission lines are present, a portion of the energy contained in the electromagnetic field surrounding the electric transmission lines is captured by each pipeline, resulting in induced AC voltages. In this paper a joint power line/pipeline Right ofWay is designed. Suitable single and double circuit configuration of overhead transmission line or suitable distance of buried pipelines from center electric power lines for mitigation of buried pipeline voltage due to AC Inductive Coupling is introduced and discussed. Copyright © 2003 IFAC  

Widespread use of sensitive loads in industries has required the need for high efficiency voltage regulators in order to provide continuous and fast dynamic adjustable AC voltage. This paper introduces a new control strategy to improve the response time and performance of a double stage switch mode regulator. The proposed strategy responds to input voltage variations quickly and improves the efficiency and performance of the circuit. Results of some simulations are presented and analyzed. Experimental tests on a laboratory prototype verify the excellent performance of the proposed system  

This paper introduces a high efficiency AC voltage regulator based on an AC/AC buck converter cascaded by a transformer in series with the input voltage. The AC/AC converter uses an overlap time in the gate signals to solve the commutation problem. Non-use of any snubber circuits and current sensors leads to lower cost, smaller size and simpler hardware. The converter generates only the compensation term which results in smaller switches and, thus, lower cost. Simulation and experimental results verify the performance of the proposed topology  

Fluid flows generated on soap films by non-uniform alternating electric fields are studied. Two parallel metal rods subjected to an AC voltage are placed perpendicular to the soap film, which is anchored in a dielectric frame. The fluid flow is generated by electrohydrodynamic induction. At very low signal frequencies there is induced surface charge, but there is no tangential electric field at the surface, so there is no force and no flow. Fluid flow is observed increasing the frequency, when there are both surface charge and tangential electric field. The flow velocity increases with decreasing thickness of the soap film  

In this paper, a new zero-voltage-switching high power-factor (PF) rectifier with Line-Modulated Fixed-Off-Time current control is introduced, that off time is a function of the instantaneous line voltage. The auxiliary circuit provides soft switching for all semiconductor devices, without any extra current and voltage stress on the main switches. The proposed converter is bridgeless, and all semiconductor devices are soft switched. In addition, there is no extra stress on the switches. Thus, the conduction and switching losses are reduced and maximum efficiency is achieved. A 250W, with an input ac voltage of 90265 Vrms and an output voltage 400 Vdc, 100 kHz is designed and simulated to... 

In this paper, the Line-Modulated Fixed Off-Time method is used as the current control strategy for a Power Factor Corrector (PFC) pre-regulator. A zero voltage switching PWM (ZVS-PWM) auxiliary circuit is configured to perform ZVS in the switches. Soft commutation of the main switch is achieved without additional current stress. A significant reduction in the total conduction loss is achieved, since the circulating current for the soft switching flows only through the auxiliary circuit and a minimum number of switching devices are involved in the circulating current path .The proposed rectifier uses a single converter instead of the conventional configuration composed of a four-diode... 

AC electric arc furnaces (EAFs) highly reduce power quality of the network by generating disturbances such as flicker and harmonics. These disturbances are due to the nonlinear electromagnetic and thermal field behaviors of the AC arcs. Analysis of these nonlinear behaviors is required for improving power quality in the network. This paper presents a three-dimensional finite element modeling of the electromagnetic fields in an AC three-phase electric arc furnace. The model includes the electrodes, arcs and molten bath. Current density, voltage and magnetic field intensity in the arcs, molten bath and electrodes are predicted as a result of applying the three-phase AC voltages to the EAF....