Sharif Digital Repository

In this study we offer a new type of plasma which consists of double, corona and glow, discharge to convert natural gas, the main part of which is methane. The most important future of this type of plasma is the steady increase of overall chemical energy efficiency by enhancement of repetition rate. At repetition rate of R = 80 Hz, the energy efficiency of 5.5% was increased to 10% at R = 330 Hz and more improvement was yet expected at higher repetition rates. Easy control of selectivity of products that were hydrogen, acetylene, ethylene, ethane and hydrocarbons with up to 5 carbons, was also possible by repetition rate  

The inhibition of mild steel corrosion in 0.5 M sulphuric acid by the symmetrical acetylenic alcohol 2- butyne-1,4-diol is investigated. Weight loss and electrochemical impedance data consistently indicate inhibition efficiencies up to 98%. Short-term impedance measurements reveal that the interfacial inhibition is a function of the exposure time, and that full performance is achieved faster as inhibitor concentration and temperature are higher. An infrared study of the surface film provides evidence that the film does not achieve its final state but after several hours. Atomic force Microscopy has been used for investigation the surface topography of metallic electrode. © 2009 by ESG  

In this study, an industrial acetylene hydrogenation unit is simulated utilizing three available kinetic models. The results are compared against six-day experimental data and the best model is selected. Effects of feed temperature and the amount of injected hydrogen on ethylene selectivity are also studied. According to the simulation results, the unit is not working under its optimum conditions. Furthermore, by reduction of the hydrogen flow rate to 52 kg/h, process selectivity is increased. In addition, a new approach is proposed to modify the hydrogenation process and reduce undesired by-products. In the simulation of the modified process, hydrogenation reactors temperature, hydrogen... 

Three isomers of diethyl 3,3-thiodipropenoate (DETDP) have been prepared as new compounds by the solvent free reaction of ethyl propiolate and thioamides or sodium sulfide in a short time and high yields  

In this research, a palladium nanocatalyst was synthesised over a multi-walled carbon nanotube (MWCNT) support and then applied for selective hydrogenation of acetylene in an ethylene-richflow stream. This material displayed a very promising selectivity toward ethylene production with increasing temperature, and also suppressed oligomer formation during acetylene hydrogenation. New operating conditions for selective hydrogenation of acetylene in an ethylene-richflow were introduced. This nanocatalyst gave a considerably higher yield, as high as 93%, than that previously obtained for ethylene production. It was postulated that the governing mechanism for acetylene hydrogenation over 0.5 wt.%... 

Nanoparticle copper/carbon composite films were prepared by co-deposition of RF-Sputtering and RF-PECVD method from acetylene gas and copper target. We investigate deposition process in the region where by changing pressure, the process converts to physical sputtering mode in constant power regime and at a critical pressure between 1.5 to 3 Pa. The estimated value of mean ion energy at this critical point of pressure is close to threshold energy of physical sputtering of copper atoms by acetylene ions. By utilizing this property and by setting initial pressure from 1.3 to 6.6 Pa, nanoparticles copper/carbon composite films were grown with different copper content. The Copper content of our... 

In this study, mathematical modeling of fixed-bed plasma reactor operated under isothermal condition was investigated. In this process, methane and acetylene were the inputted feed and ethane, ethylene, propylene, propane, i-butane, and n-butane were the output products. The amount of methane conversion obtained was 12.7% for the former feed, however, if pure methane was inputted this conversion rose to 13.8%. Furthermore, the plasma process enhanced the conversion as well as the selectivity toward the desired product and yield. In the present study, when methane and acetylene were fed at a molar ratio of CH4/C2H2 = 10 to the reactor, the selectivity of C2, C3, and C4 hydrocarbons was... 

Pulsed atmospheric glow plasma, sustained by corona discharge, was utilized to convert methane. Analysis by gas chromatography showed that hydrogen and C2-products are the main constituents of outlet mixture while C 2+-products with small concentrations were also detected. The chemical energy efficiency turned out to be about 9% for the best result obtained by this type of reactor. It has been shown that more improvement of energy efficiency is possible by increasing ' the pulse repetition rate  

By co-deposition via RF-Sputtering and RF-PECVD methods and using Cu target and acetylene gas, we prepared Cu@Cu2O coreshell nanoparticles on the a-C:H thin film at room temperature. Mie absorption of Cu cores, scattering from Cu2O shell and luminescence that rises from carrier transfer in Cu@Cu2O interface were employed to fit the whole range of visible extinction spectrum of these coreshells. From simulation it was found that scattering and luminescence have an important effect on the energy, width and shape of LSPR absorption peak. Shift of LSPR peak is more affected by the dielectric coefficient of shell than Cu core size particularly for Cu core diameter above 4 nm. Also, the LSPR... 

We report optical and electrical properties of Cu-Ni nanoparticles in hydrogenated amorphous carbon (Cu-Ni NPs @ a-C:H) with different surface morphology. Ni NPs with layer thicknesses of 5, 10 and 15 nm over Cu NPs @ a-C:H were prepared by co-deposition of RF-sputtering and RF-Plasma Enhanced Chemical Vapor Deposition (RF-PECVD) from acetylene gas and Cu and Ni targets. A nonmetal-metal transition was observed as the thickness of Ni over layer increases. The surface morphology of the sample was described by a two dimensional (2D) Gaussian self-affine fractal, except the sample with 10 nm thickness of Ni over layer, which is in the nonmetal-metal transition region. X-ray diffraction profile... 

Two nanocatalysts of palladium over multi-walled carbon nanotubes (MWCNT) were synthesized and their catalytic properties evaluated in selective hydrogenation of acetylene. Different procedures were applied to synthesize catalysts which resulted in two distinct average particle sizes of palladium (Pd) over the MWCNT. The resulting catalysts displayed dissimilar NH3-TPD behaviors as well as different selectivity performances at lower temperatures. While enhancement of the hydrogen transfer mechanism occurred upon the temperature increase, similar behaviors for the aforementioned materials were obtained. Furthermore, it was revealed that the catalytic performance at higher temperatures did not... 

In this study, mathematical modelling of oxidative coupling of methane (OCM) to C 2 hydrocarbons (C 2H 6 and C 2H 4) over La 2O 3/CaO catalyst in a fixed-bed reactor operated under isothermal and non-isothermal conditions was investigated using the MATLAB program. In this process, methane and acetylene were the inputted feed and ethane, ethylene, propylene, propane, i-butane and n-butane were the output products. The amount of methane conversion obtained was 12.7% for the former feed however; if pure methane was inputted this conversion rose to 13.8%. Furthermore, the plasma process would enhance the conversion, selectivity towards desired product and process yield. A comparison between the... 

The one-pot synthesis of a novel class of substituted quinoline derivatives with good yields is achieved via the Cu-catalyzed intramolecular C─H activation reaction between isocyanides, aniline, and acetylene dicarboxylate in MeCN at room temperature. The existence of one-pot conditions, availability of a starting material-catalyst, the absence of column chromatography, and a high yield of products are among the advantages of this method. The structures are confirmed spectroscopically (1H NMR and 13C NMR, IR, and EI-MS) and through elemental analyses