Sharif Digital Repository

A novel mesoporous silica-functionalized dual Brønsted acidic species has been introduced as an efficient catalyst for solvent-free esterification of fatty acids with ethanol. The structure of the catalyst has been characterized by FT-IR spectroscopy, thermal gravimetric analysis (TGA), TEM and N2 adsorption-desorption. TGA of catalyst 1 showed no weight loss before 200 °C, indicating a high degree of hydrophobicity of the surface of the mesoporous silica. TEM images and nitrogen adsorption-desorption showed no noticeable changes to the structure of the catalyst before and after acid treatment. pH metric analysis was performed for the catalyst to determine the loading of the acidic sites.... 

Coke deposition mechanism on a commercial Pt-Re/γ-Al 2O3 naphtha reforming catalyst was studied. A used catalyst that was in industrial reforming operation for 28 months, as well as the fresh catalyst of the unit were characterized using XRD, XRF, and nitrogen adsorption/desorption analyses. Carbon and sulfur contents of the fresh and the used catalysts were determined using Leco combustion analyzer. The pore size distributions (PSD) of the fresh and the used reforming catalysts were determined using BJH and Comparison Plot methods. The Comparison Plot method produced the most reasonable PSDs for the catalysts. Through comparison of the PSDs of the fresh and the used catalysts, it was... 

Ni/SiC nanocomposite coatings were electrodeposited using Watts type bath and different SiC particle size. The electrodeposition behavior of Ni/SiC nanoelectrocomposites was studied using electrochemical techniques such as impedance spectroscopy (EIS) and voltammetry. In this study it was shown that SiC particles modify the EIS diagram and voltammograms as well as surface morphology of electrodeposited layers. Experimental results showed that SiC particles not only affect the formation of intermediate species and decrease charge transfer resistance but also increase the nucleation sites for nickel electrodeposition and thus affect the microstructure of electrodeposited Ni/SiC nanocomposites.... 

The current work deals with modification of the surface of a silica-polyamine with amine-based ionic liquid (IL) and its application for removal of Cu2+ from an aqueous media. The absorbent is simply prepared from commercially available reagents. The material is characterized by FT-IR spectroscopy, thermogravimetric analysis (TGA), N2 adsorption-desorption, and transmission electronic microscopy (TEM). Effects of several parameters on absorption efficiency, as well as activity of the absorbent to other metals, are also investigated. Moreover, the reusability of the absorbent is studied at the optimized condition. © The Royal Society of Chemistry 2016  

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min-1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min-1 (61.95 μg g-1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

GAC has been modified by loading of potassium nickel hexacyanoferrate (KNiCF) as a new adsorbent for cesium adsorption. The potassium nickel hexacyanoferrate-loaded granular activated carbon (KNiCF-GAC) was characterized using powder x-ray diffraction (XRD) and nitrogen adsorption-desorption isotherm data, infrared spectroscopy, and its cesium adsorption performance in aqueous solution was investigated. The effect of the various parameters such as initial pH value of the solution, contact time, temperature, and initial concentration of the cesium ion on the adsorption efficiencies of KNiCF-GAC have been studied systematically by batch experiments. The adsorption isotherm of KNiCF-GAC was... 

A new photocatalyst (Ag-S/PEG/TiO2) was synthesized by adding polyethylene glycol (PEG) to an efficient Ag-S/TiO2 photocatalyst, to obtain a photocatalyst that is highly active under visible light. In addition to Ag-S/PEG/TiO2, Ag-S/TiO2 and pure TiO2 were prepared to compare their properties and activities. Specifically, the morphologies and microstructures of the nanophotocatalysts were characterized by means of powder X-ray diffraction (XRD), N2 adsorption-desorption measurements, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy,... 

A novel organic-inorganic hybrid heterogeneous catalyst system was obtained from the reaction of the molybdenum(VI) complex of salicylidene 2-picoloyl hydrazone with mesoporous silica containing 3-chloropropyl groups prepared by a direct synthetic approach involving hydrolysis and co-condensation of tetraethylorthosilicate (TEOS) and 3-chloropropyltrimethoxysilane in the presence of the triblock copolymer P123 as template under acidic conditions. Characterization of the functionalized materials by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), N2 adsorption/desorption, FT-IR and UV-Vis spectroscopy, and thermogravimetric... 

TiO2 nanoparticles supported on activated carbon (AC) and multiwalled carbon nanotubes (MWCNTs) were prepared by the sol-gel method using ultrasonic irradiation. All the prepared samples were calcined at different temperatures and characterized by X-ray diffraction, nitrogen adsorption/desorption isotherms, scanning electron microscopy, transmission electron microscopy and diffuse reflectance spectroscopy. The effects of size and type of carbon on the morphology and photocatalytic activity of the resulting hybrid materials were investigated. The results showed that a decrease in the size of the carbon led to a decrease in size of TiO2 nanoparticles. Both AC and MWCNTs retarded the... 

Abstract In this study, adsorption of the CO2 and N2 gases on the MIL-53(Al) and its hybrid composite with the graphene nano-plates (GNP), MIL-53(Al)/GNP, adsorbents were investigated. These materials were synthesized using the solvothermal reaction method. The prepared samples were characterized by means of the powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FESEM), N2 adsorption-desorption isotherms (BET-BJH surface area measurement) and Fourier transfer infrared (FT-IR) spectroscopy methods as well as; thermogravimetric analysis (TGA). Adsorption equilibrium of the CO2 and N2 on the sorbents were... 

The preparation, characterization and catalytic application of a novel copper-loaded ionic liquid-based periodic mesoporous organosilica (Cu@PMO-IL) are described. The mesoporous structure of the Cu@PMO-IL material is characterized by transmission electron microscopy (TEM) and nitrogen adsorption-desorption analysis. The thermal stability of the material is also determined by thermal gravimetric analysis (TGA). The presence of copper species in the material framework is confirmed by X-ray photoelectron spectroscopy (XPS) and elemental analysis (EA). The catalytic application of Cu@PMO-IL nanocatalyst is then investigated in the Biginelli condensation of different aldehydes with urea and... 

In this work, a comparative study has been performed on two ex-situ and one in-situ doping of titania photoanodes with reduced graphene oxide. The presence of finely dispersed reduced graphene oxide facilitates electron transport and reduces electron-hole recombination resulting in a better performance of doped titania photoanodes. It was found that in-situ doping, i.e. introduction of graphene oxide in solution together with titania precursor was the most performant case of graphene doping. This result was obvious by studying dye-sensitized solar cells based on such doped photoanodes but was also and mainly analytically demonstrated by subjecting the obtained materials to characterization... 

Amphiphilic copolymers consist of hydrophilic and hydrophobic monomer units have attracted great technological attention recently, owing to their unique properties and their ability to stabilize various interfaces in aqueous systems. This paper presents a novel and facile approach to produce spherical polyacrylamide, polystyrene and hydrophobically modified polyacrylamide (HM-PAM), as one of the most important type of amphiphilic copolymers, using a continuous aerosol-photopolymerization for the first time. To this end, the monomer droplets were generated by an atomizer, then photopolymerization was initiated ‘‘in flight’’ by ultraviolet (UV) irradiation of the aerosol monomer droplets... 

The Zr-based metal-organic framework (MOF, UiO-66) was synthesized solvothermally. The synthesized UiO-66 was activated using different solvents (acetone, chloroform, and ethanol) via two activation methods of centrifugation and Soxhlet extraction over different periods (1–10 days). The crystalline structure and morphology of the synthesized UiO-66s were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, and field-emission scanning electron microscopy (FESEM) techniques. The adsorption behaviors of the synthesized UiO-66s were then investigated by selecting anionic methyl red (MR) and cationic methylene blue (MB) as the model dyes. It was found that a change in... 

The UiO-66 NH2 and ZIF-8 metal organic framework nanoparticles (NMOFs) were incorporated into the polyvinylidene fluoride (PVDF) nanofibrous membrane. Then, the chitosan nanofibers were coated on the PVDF nanofibers to produce the PVDF/chitosan nanofibers. The performance of synthesized PVDF/NMOFs single layer and PVDF/chitosan/NMOFs two layers nanofibrous membranes was investigated for BSA protein molecules and Cr(VI) ions separation via ultrafiltration membrane process. The potential of synthesized nanofibers was also examined for BSA and Cr(VI) adsorption in a batch system. The characteristics of synthesized nanofibrous membranes were determined using SEM, EDX, TGA, BET, porosity and... 

The on-fiber standardization technique for solid-coated solid-phase microextraction (SPME) was studied, and a theoretical model is proposed for the isotropic behavior of adsorption and desorption, based on Fick's law of diffusion and the Langmuir model. The isotropy of the adsorption and desorption of analytes onto and from the surface of porous solid SPME fiber was validated with the use of a commercially available fiber, a 50-μm Carbowax/ templated resin for carbamate pesticide analysis in various sample matrixes, and a self-made polypyrrole fiber for diazepam analysis in blood samples. Time constants were comparable for the adsorption and desorption processes. Equilibrium constants and... 

The Zr-based metal-organic framework (MOF, UiO-66) was synthesized solvothermally. The synthesized UiO-66 was activated using different solvents (acetone, chloroform, and ethanol) via two activation methods of centrifugation and Soxhlet extraction over different periods (1–10 days). The crystalline structure and morphology of the synthesized UiO-66s were characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, and field-emission scanning electron microscopy (FESEM) techniques. The adsorption behaviors of the synthesized UiO-66s were then investigated by selecting anionic methyl red (MR) and cationic methylene blue (MB) as the model dyes. It was found that a change in... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different...