Sharif Digital Repository

Computer-assisted methods were employed to develop a statistical relationship between molecular-based structural parameters and log critical micelle concentration (CMC) of some anionic surfactants. The CMC of 31 alkyl sulfates and alkanesulfonates were used for model generation. Among different models, two equations were selected as the best, and their specifications are given. The statistics of these models together with cross-validation results indicate the capability of both models to predict the CMC of anionic surfactants. Three descriptors of Wiener number, reciprocal of the dipole moment, and reciprocal of the Randic index appear in the models. Results indicate that topological... 

Ni-TiN nanocomposite coatings were prepared by using electrochemical deposition in a Watt's bath containing TiN particles to increase the hardness of Ni. The effects of deposition current density, electrolyte agitation speed and the number of particles in the solution on the amount of incorporated particles in the coating process were investigated. The optimum deposition current density of 4 A dm-2 and agitation speed of 450 rpm were obtained. The effect of sodium dodecyl sulphate (SDS) anionic surfactant on the amount of particles in the coatings was investigated. It was observed that the maximum amount of incorporated particles, with a value of 7.5% by volume, was created in the current... 

A new gelator based of oleylamide has been introduced, which was gelled nonpolar hydrocarbon and CCl4 solvents through self-assembly. Also, the gelator formed a two-component hydrogel in combination with SDS, an anionic surfactant. UV-Vis studies revealed that the H-type and J-type aggregation of organogels in hexane and hydrogel in water, respectively. The xerogel, obtained by evaporating the solvent of organogel, selectively gelled and adsorbed oil spills on water surfaces. The effect of the various parameters, including temperature, water acidity and pH on the oil spill adsorption was studied, revealing the high ability of the xerogel to removing the oil contamination from water in up to... 

The anionic surfactant linear alkylbenzene sulfonate (LAS) is a major chemical constituent of detergent formulation. Regarding the recalcitrant nature of sulfonoaromatic compounds, discharging these substances into wastewater collection systems is a real environmental issue. A study on LAS biodegradation based on bioelectrochemical treatment and in the form of developing a single-chamber microbial fuel cell with air cathode is reported in the present work. Pretreatment study showed LAS concentration of 60 ppm resulted in the highest anaerobic LAS removal of 57%; so, this concentration was chosen to run the MFC. After the sustained anodic biofilm was formed, LAS degradation rate during 4 days... 

Yttrium Iron Garnet (YIG) powders were synthesized by a sol-gel auto-combustion method using cationic and anionic surfactants with different values and different calcination times and temperatures. The final products were characterized by DTA/TG, XRD, TEM and VSM techniques. The results showed a decrease in calcination temperature and crystallite size in the presence of a cationic surfactant, while no significant effect was observed using an anionic surfactant. Magnetic properties of YIG powders were improved as an optimum value of cationic surfactant was used  

Mixed protein-surfactant adsorption layers can be built up in two different ways. The classical way is when all components adsorb simultaneously from a mixed solution. Alternatively, the components adsorb one after another, i.e. in a sequential way. In the present work, the formation of such surface layers has been studied with the random coil protein β-casein in the presence of added anionic surfactant SDS and compared for two different interfaces: the water-air (W-A) and water-hexane (W-H) interfaces. The used experimental technique is a drop profile analysis tensiometer PAT-1 specially equipped with a coaxial double capillary for drop volume exchange during the experiments. The results... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

Colloidal Gas Aphron (CGA) are finding increasing application in fields of science and engineering because of their distinctive characteristic. As interest in the application of CGA based fluids grows and in order to select the best procedure for using them in successful petroleum engineering operations, there is a need to gain a better understanding of the factors that affect their properties and behavior. This article discusses the rheological characterization, stability analysis and filtration properties of CGA based fluids for three bio-polymers and two ionic surfactant. The stability and filtration analysis were investigated with the static drain rate technique and API filtration tests,... 

In this research, the influence of anionic surfactant sodium dodecyl sulfate (SDS), pH, substrate finishing, and annealing temperature on the surface morphology and hardness of the electroless nickel phosphorus (ENi-P) coatings were studied. Taguchi's experimental design method was used. Parameters selected in three levels and L9 from orthogonal robust array design were employed. Surface roughnesses of the deposits were measured using a stylus instrument. Scanning electron microscope and x-ray diffraction analysis were implemented to study surface morphologies and phase composition, respectively. Microhardness of the ENi-P deposits was measured using a microhardness tester at three trials... 

The strength of a newly formulated surfactant with an alkali and polymer (AS/ASP) to improve an acidic heavy oil recovery was laboratory evaluated by various flooding experiments. The comparative role of the parameters like chemical nature, surface wettability, salinity, temperature and injection scheme were explored at high temperature and pressure on Berea sandstone rocks. According to the results the anionic surfactant is capable of providing proper oil displacement under high salinity conditions around 15 wt%. Continuous monitoring of differential pressure response and effluents’ state clearly represented the formation of an emulsified oil in high saline solutions with both alkali and... 

Changing the wettability of reservoir rock towards strongly water-wet state is effective way to enhance oil recovery from fractured carbonate reservoirs which are typically oil-wet. Regarding this fact, the injection of surfactant and the bacterial solution as EOR agents is proposed in the current work as a potential method to alter the wettability of rock surface reservoir. Nevertheless, there is a definite lack of experimental data regarding this method and the synergistic effect of both chemical and bacterial solutions on this process. In this study, the sole and combined effects of the bacterial solution using an Enterobacter cloacae strain as a biosurfactant-producer are compared with... 

Alumina nanofluids are one of the most useful nanofluids. In order to evaluate the colloidal behavior of nanoparticles in alumina/water nanofluid, the influence of effective factors such as pH, ionic strength and surfactants, was studied. Zeta potential, particle size and turbidity change of each nanofluid was investigated. According to the results for 0.05, 0.1 and 0.2 mass% nanofluid, point of zero charge was obtained at pH values of 9.5, 10.2 and 10.5, respectively. The highest nanofluid stability occurred at pH 4 and its lowest was at pH 10. The anionic surfactant had a greater effect on the stability in compared with cationic and nonionic surfactants. By increasing in ionic strength,... 

The present study aims at monitoring the bulk and bubble-scale behaviour of anionic polyacrylamide-sodium dodecyl sulphate stabilized foam in the absence and presence of oil. Dynamic stability tests provided results indicating that polymer increases the foam dynamic stability and decreases the drainage. Oil slows down the drainage rate of polymer-surfactant foam. In the absence of oil, foam is drained gradually/smoothly whereas remarkable fluctuations are evident in drainage graphs when oil is present. The Hele-Shaw cell was employed to conduct bubble-scale as well as statistical analyses on how foam texture is influenced by a polymer-surfactant system and hydrocarbon. Bubble-scale analyses,... 

Alumina nanofluids are one of the most useful nanofluids. In order to evaluate the colloidal behavior of nanoparticles in alumina/water nanofluid, the influence of effective factors such as pH, ionic strength and surfactants, was studied. Zeta potential, particle size and turbidity change of each nanofluid was investigated. According to the results for 0.05, 0.1 and 0.2 mass% nanofluid, point of zero charge was obtained at pH values of 9.5, 10.2 and 10.5, respectively. The highest nanofluid stability occurred at pH 4 and its lowest was at pH 10. The anionic surfactant had a greater effect on the stability in compared with cationic and nonionic surfactants. By increasing in ionic strength,... 

Mass-transfer rates to and from drops in liquid-liquid extraction processes are often reduced by the presence of contaminants. To design an industrial extractor, it is essential to consider this contamination effect in a quantitative manner. To achieve this goal, an experimental investigation was conducted on the mass transfer into single drops for n-butanol-succinic acid-water, as the recommended test system by the European Federation of Chemical Engineering (EFCE). The effects of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethyl ammonium chloride, DTMAC), and nonionic (octylphenol decaethylene glycol ether, Triton X-100) surfactants on the hydrodynamic and mass-transfer... 

Despite previous researches on ion-engineered waterflooding (IEWF), its underlying mechanisms are not fully understood, particularly in presence of additives, like surfactants. This paper concerned with the contribution of Ca 2+ , Mg 2+ , SO 4 2- and Na + into altering wettability of oil-wet carbonate minerals towards water preferred state. As a mechanistic study, an experiment workflow was conducted to probe the impact of ions' concentrations in SW, either with or without sodium dodecylbenzene sulfonate (SDBS) which is an anionic surfactant. At first, contact angle (CA) measurement was carried out to evaluate the degree of wettability reversal upon treating the oil-aged calcite slabs with... 

This work concerns the experimental investigation of surfactant alternating CO 2 injection in carbonate rocks. The core samples provided from a low-temperature fractured light oil reservoir, located in southwest Iran. The experiments were designed to observe the effect of CO 2-foam injection on gas mobility and oil recovery at different surfactant concentrations. The core samples were initially saturated with synthetic/field brine, 5,000 ppm, and then flooded with live oil to reach connate water saturation at reservoir condition, 115F and 1,700 psia. The commercial surfactant used was sodium lauryl sulfate as an anionic surfactant. The results of this work, along with field-scale simulation...