Sharif Digital Repository

In the present paper, the effect of Nano silica on mechanical properties and durability of concrete containing polypropylene fibers has been investigated. Here, the length and length to diameter ratio of used polypropylene fibers were considered to be fixed and equal to 18 mm and 600 respectively and the cement content was 479 kg/m3. The effect of fibers and Nano silica in four different percentages for each one at 0.1, 0.2, 0.3 and 0.4 percent by volume for fibers and 3 percent for Nano silica in concrete with water to cement ratio of 0.33, 0.36, 0.4, 0.44 and 0.5 have been compared and evaluated. In total, more than 425 cubic and cylindrical specimens were made according to ASTM standards.... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were... 

The present study aims to convert waste cooking oil (WCO) into biodiesel via phosphomolybdic acid (H3PMo12O40, PMA) supported on Clinoptilolite as a novel green acid catalyst through an electrolysis procedure. The prepared catalysts were characterized by XRD, FTIR, FESEM, EDS, Elemental map, and TEM analyses. The effect of four independent variables on biodiesel yield including methanol to oil molar ratio (6:1–14:1), catalyst weight (2–5 wt%), time (3–5 h), and voltage (15–35 V) was optimized and evaluated by the response surface methodology (RSM) employing central composite design (CCD). The maximum value of biodiesel yield was 96% under the optimal conditions, including the methanol to oil... 

In this study, biodiesel (FAME) was prepared using a novel heterogeneous catalyst of phosphomolybdic acid (H3PMo12O40, HPMo)/support graphene oxide (GO). The characterization of the catalyst was evaluated by SEM, EDX, Map analysis, TEM, FT-IR, and Raman analyses. The production of biodiesel from waste cooking oil (WCO) was carried out by the electrolysis method. The process of the trans-esterification reaction was optimized by applying the response surface methodology (RSM) based on the central composite design (CCD) approach. The effects of four independent variables of methanol to oil molar ratio (6–12 mol:mol), catalyst weight (0.5–1.5 wt%), time (8–24 h), and voltage (30–70 V) were...