Sharif Digital Repository

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

Interfacial tension (IFT) as one of the main properties for efficient CO2 flooding planning in oil reservoirs depends strongly on pressure, temperature, and composition of the reservoir fluids. Therefore, it is important to measure this property at real reservoir conditions for successful field development plan. In this study, an axisymmetric drop shape analysis (ADSA) has been utilized to measure the equilibrium IFTs between crude oil and CO2 at different temperatures and pressures. Moreover, minimum miscibility pressures (MMP) and first-contact miscibility pressures (P max) of crude oil/CO2 systems at different temperatures are determined by applying the vanishing interfacial tension (VIT)... 

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

The interfacial tension (IFT) of a crude oil/CO2 system is recognized as the main property affecting the efficiency of CO2 flooding during an enhanced oil recovery (EOR) process. The addition of a paraffin group hydrocarbon to asphaltenic crude oils as an asphaltene precipitant component is aimed to mimic the asphaltene precipitation process during crude oil production and transportation. Asphaltene precipitation would critically affect the interfacial behavior of crude oil/CO2 systems. In the first part of this study, the equilibrium densities of oil samples which contain n-heptane at different ratios were measured over varying pressures at 323 K. Then, the equilibrium IFT between CO2 and... 

Interfacial tension (IFT) is known as the critical parameter affecting the efficiency of CO2 flooding during the enhanced oil recovery (EOR) process. Besides, the asphaltene precipitation phenomenon is reported as the most significant problem during CO2 injection into asphaltenic oil reservoirs. Accordingly, it is important to examine the effect of asphaltene precipitation on the IFT behavior of the oil-CO2 system at reservoir conditions. The main objective of this research work is to study of the effect of asphaltene and its type on the IFT behavior of the oil-CO2 system. The IFT between pure CO2 and a model oil both with and without asphaltene was measured using an axisymmetric drop shape... 

Interfacial tension (IFT) is known as the critical parameter affecting the efficiency of CO2 flooding during the enhanced oil recovery (EOR) process. Besides, the asphaltene precipitation phenomenon is reported as the most significant problem during CO2 injection into asphaltenic oil reservoirs. Accordingly, it is important to examine the effect of asphaltene precipitation on the IFT behavior of the oil-CO2 system at reservoir conditions. The main objective of this research work is to study of the effect of asphaltene and its type on the IFT behavior of the oil-CO2 system. The IFT between pure CO2 and a model oil both with and without asphaltene was measured using an axisymmetric drop shape... 

This study investigates dynamic interfacial tension (DIFT) of acidic crude oil (ACO) and non acidic/basic crude oils (BCO) + deionized water (DW) as a function of pressure from 500 to 4000 psi, and temperature from 30 to 80 °C using an axisymmetric drop shape analysis (ADSA) technique. DIFTs are also modeled using dynamic adsorption model, mono-exponential decay model, and empirical equations. The results showed that if a reduction in the surface excess concentration due to increasing temperature overlooks the total entropy of the molecules in the system, an increase in IFT would be expected  

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

In this research, the IFT behavior of two different specimens of W/O emulsion with distinctive soluble ingredients of water in contact with CO2 and N2 was examined. The Minimum Miscibility Pressure (MMP) of the mentioned gases with emulsion specimens were measured and compared with the case of the original crude oil with no water content. This study focuses on the quantity of water in the W/O emulsion specimens and its effects on IFT and MMP values. The IFT behavior of W/O emulsions was surveyed for two different cases of distinctive water soluble ingredients, i.e. sea water and reservoir brine. The tests were performed under high pressure-high temperature (HPHT) conditions utilizing... 

Wettability alteration of rock surfaces toward gas wetting have been recognized as a practical approach for maximizing the production from the gas condensate reservoirs. Most of the reported work in this area applied the so called sessile drop contact angle measurement technique to examine the change in wetting state of a surface. However, the size-dependent wetting behavior of drop which could affect the exact determination of wettability and wettability changes was not well discussed in the previous studies. Therefore, in this work, the size dependency of contact angle for four different liquid-solid-gas systems; i.e., water-calcite-air, water-treated calcite-air (nanofluid treated... 

In this work, sessile drop and low-bond axisymmetric drop shape analysis methods were coupled to provide some new aspects on stick-slip behavior as well as stick time of a drop on calcite surfaces. Slightly hydrophobic calcite surfaces typified with three irregular roughnesses were used to create irregular surfaces to mimic defects for the water-calcite-air systems. Polishing papers of 200, 600, and 1200 grit and a polishing machine were used to prepare surfaces. X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier transform infrared, and atomic force microscopy techniques were employed to evaluate the chemical and physical properties of surfaces. A model was developed to predict...