Sharif Digital Repository

In this work, desalination of saline brines using the sweeping gas membrane distillation (SGMD) process is investigated. The Taguchi method was applied for optimization of the operating parameters. An L9 orthogonal array was used to investigate the influence of pertinent variables, including feed temperature (Tf: 45°C, 55°C and 65°C), feed flow rate (Qf: 200, 400 and 600 mL/min), feed concentration (Cf: 10, 25 and 50 g/L) and sweeping gas flow rate (Qc: 4, 10, and 16 SCFH) on the distillate flux. Results of the experiments showed that maximum distillate flux, which was about 10 L/m2 h, obtained at 65°C feed temperature, 16 SCFH sweeping gas flow rate and brackish water with 10 g/L salt... 

This work represents the efficiency of a solar desalination pond as a second stage of proposed zero discharge desalination processes to reach fresh water and also concentrated brine from the effluent wastewater of the desalination unit of Mobin petrochemical complex. So a solar desalination pond is constructed after a pretreatment unit to concentrate the softened wastewater to about 20wt%. The concentrated wastewater is as a suited feed for a forced circulation crystallizer. During one year, the effects of major parameters such as ambient temperature and solar insolation rate are investigated, experimentally. specific gravity in each layer of concentrated brine wastewater is evaluated. Also,... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

Water-in-oil emulsion usually forms during waterflooding in some heavy oil reservoirs. The composition and salinity of the injected water critically affect the w/o emulsion droplet size distribution, which control the emulsion stability and emulsion flow in porous media. The aim of the present work is to assess the effect of different sea water salinities on w/o emulsion stability through microscopic imaging. Therefore, w/o emulsions were prepared with different sea water samples, which were synthesized to resemble Persian Gulf, Mediterranean, Red Sea, and North Sea water samples. The results showed that log-normal distribution function predicts very well the experimental data to track the... 

Water-in-oil emulsion usually forms during waterflooding in some heavy oil reservoirs. The composition and salinity of the injected water critically affect the w/o emulsion droplet size distribution, which control the emulsion stability and emulsion flow in porous media. The aim of the present work is to assess the effect of different sea water salinities on w/o emulsion stability through microscopic imaging. Therefore, w/o emulsions were prepared with different sea water samples, which were synthesized to resemble Persian Gulf, Mediterranean, Red Sea, and North Sea water samples. The results showed that log-normal distribution function predicts very well the experimental data to track the... 

The petroleum industry suffers from reservoir souring phenomena, which has negative impacts on production facilities, health, and environment. Injection of incompatible water into the reservoir (waterflooding), which is considered as an enhanced oil recovery (EOR) method, is one of the most common causes of reservoir souring. In general, injected brine, especially seawater, contains high amounts of sulfate ion (SO42−). A high concentration of sulfate in the presence of sulfate-reducing bacteria (SRB) leads to the microbial reservoir souring. During this phenomenon, sulfide, specifically hydrogen sulfide gas (H2S) appears in the producing fluid of the reservoir. In this paper, a coupled...