Loading...
Search for: calcium-chloride
0.01 seconds

    Fluoride Removal from Radioactive Wastes of Isfahan's UCF Plant by Using Chemical Precipitation Method

    , M.Sc. Thesis Sharif University of Technology Namaki, Raziye (Author) ; Samadfam, Mohammad (Supervisor) ; Yavari, Ramin (Supervisor) ; Davarkhah, Reza (Co-Advisor)

    Enhancement of Alkaline Protease Production Using Process Factors

    , M.Sc. Thesis Sharif University of Technology Daliri, Zeinab (Author) ; Roostaazad, Reza (Supervisor)
    Abstract
    In this research, we have studied optimization of culture medium and process factors for high alkaline protease production from Bacillus subtilis ATCC 6633 for detergent usage. Five parameter soy bean meal, initial pH, agitation rate, MgSO4, CaCl2 were selected for more studies. At first, one-factor-at-a-time method was applied to investigate effect of each factor separately. Then, optimum condition for maximum protease production was achieved using Minitab software Box-benhnken procedure. According to results, high protease production was seen in soy bean meal, 35 (g/L); MgSO4, 1 (g/L); CaCl2 , 1.5 (g/L); initial pH, 7; agitation rate, 150; inoculum ratio, 12% (v/v). The activity of the... 

    Investigation of salts behavior at liquid–liquid interfaces

    , Article Springer Proceedings in Mathematics and Statistics, 26 August 2013 through 30 August 2013 ; Volume 117 , July , 2015 , Pages 265-270 ; 21941009 (ISSN) ; 9783319123066 (ISBN); 9783319123066 (ISBN) Khiabani, N. P ; Bahramian, A ; Soltani, M ; Pourafshary, P ; Sarikhani, K ; Chen, P ; Ejtehadi, M. R ; Makarov R. N ; Melnik R. V. N ; Kotsireas I. S ; Shodiev H ; Cojocaru M. G ; Cojocaru M. G ; Makarov R. N ; Melnik R. V. N ; Kotsireas I. S ; Shodiev H ; Sharif University of Technology
    Springer New York LLC  2015
    Abstract
    We have used molecular dynamics simulation to investigate hydrophilic– hydrophobic interfaces between calcium chloride (CaCl2) aqueous solutions and normal hexane. The results demonstrate the increasing impact of salt concentration on the liquid–liquid interfacial tension, hence, negative adsorption of CaCl2 according to Gibbs adsorption isotherm. Moreover, we calculated the density profiles of hexane, water, and the counter ions. The results reveal an electrical double layer near the interface and the less affinity of calcium cations toward the interface than that of chloride anions. Orientation of water molecules at the studied concentrations may result in developing a positively charged... 

    Production of extracellular protease and determination of optimise condition by bacillus licheniformis BBRC 100053

    , Article Chemical Engineering Transactions ; Volume 21 , 2010 , Pages 1447-1452 ; 19749791 (ISSN) ; 9788895608051 (ISBN) Ghobadinejad, Z ; Yaghmaei, S ; Haji Hosseini, R ; Sharif University of Technology
    Abstract
    The production of protease by Bacillus licheniformis BBRC 100053 was studied. The most appropriate medium for the growth and protease production is composed of: lactose 1 %, yeast extract 0.5 %, peptone 0.5 %, KH 2PO4 0.1%, MgSO4.7H2O 0.02 %. Enzyme production corresponded with growth and reached a maximums level (589 U/ml) during the stationary phase at 35 °C, pH equivalent to 10 and with 150 rpm after 73 hours. Protease activity was highest at pH 8 and 45 °C. The best carbon sources are respectively lactose and maltose and the best nitrogen source is peptone The protease was highly active and stable from pH 7.0 to 11.0 with an optimum at pH 7-8.Thermo stability of the enzyme was considered... 

    Improving survivability of lactobacillus plantarum in alginate-chitosan beads reinforced by Na-tripolyphosphate dual cross-linking

    , Article LWT ; Volume 97 , 2018 , Pages 440-447 ; 00236438 (ISSN) Vaziri, A. S ; Alemzadeh, I ; Vossoughi, M ; Sharif University of Technology
    Abstract
    In the present study, Lactobacillus plantarum PTCC 1058 was microencapsulated in Alginate-chitosan blended beads based on ionically dual cross-linking by Na-tripolyphosphate (Na-TPP). The homogenous solution of bacteria and alginate was dripped into the gelling bath of calcium chloride. After 30 min hardening, filtrate beads were transferred into the solution of chitosan. Dual cross-linked gel beads were prepared by employing Na-TPP solution to the chitosan coated beads. Morphology, particle size, alginate-chitosan interaction, characterizing the structure of single and dual cross-linked beads were determined by using scanning electron microscopy SEM, FTIR and XRD analysis. FTIR analysis... 

    Production of extracellular protease and determination of optimal condition by bacillus licheniformis BBRC 100053

    , Article International Journal of Engineering, Transactions B: Applications ; Volume 22, Issue 3 , 2009 , Pages 221-228 ; 1728-144X (ISSN) Ghobadi Nejad, Z ; Yaghmaei, S ; Haji Hosseini, R ; Sharif University of Technology
    Materials and Energy Research Center  2009
    Abstract
    The production of protease by Bacillus licheniformis BBRC 100053 was studied. The most appropriate medium for the growth and protease production is composed of: lactose 1%, yeast extract 0.5%, peptone 0.5%, KH2PO 4 0.1%, MgSO4.7H2O 0.02%. Enzyme production corresponded with growth and reached a maximums level (589 U/ml) during the stationary phase at 35°C, pH equivalent to 10 and with 150 rpm after 73 hours. Protease activity was highest at pH 8 and 45°C. The best carbon sources are respectively lactose and maltose and the best nitrogen source is peptone. The protease was highly active and stable from pH 7.0 to 11.0 with an optimum at pH 7-8.... 

    Investigation of Water Salinity Effect on Asphaltene Precipitation Using PC-SAFT EOS

    , M.Sc. Thesis Sharif University of Technology Amanabadi, Javad (Author) ; Jamshidi, Saeed (Supervisor)
    Abstract
    In this study, for investigation of water salinity effect on asphaltene modeling, PC-SAFT equation of state has been used. All steps of modeling have been done by C sharp programming language software. Nghiem model has been used for modeling of asphalting pure solid. In this model, the heaviest component is split into two precipitating and nonprecipitation parts that their physical properties are the same in each part. Furthermore, to determine the exact mechanism of asphaltene precipitation, an oil model (Asphaltene+heptan+tuloene) in the presence of different water brine such as synthetic brine (with MgCl2, CaCl2, and Na2SO4 salts), seawater) ten and two times diluted), and formation water... 

    Manufacture and Experimental Study of the Desalination System and Atmospheric Water Generator with Evacuated Tube Collector

    , M.Sc. Thesis Sharif University of Technology Akbarpour, Gholamhossein (Author) ; Shafii, Mohammad Behshad (Supervisor)
    Abstract
    This research aims to design and build a device that Using solar energy and can be used as water heaters and water desalination and water from the soluble hygroscopic. For this purpose, a combination of evacuated tube collector with parabolic through collector with sun tracking mechanism is used. sun tracking mechanism is polar and works with optical sensor. in this research we have designed new setup with evacuated tube collector for direct desalination and water heater. in this method heat pipes have been omitted from setup that cause high performance in heat transfer from evacuated tube collector to water and is minimized losses. 15w air compressor used to increased rate of evaporation ... 

    Application of a new gibbs energy equation to model a distillation tower for production of pure ethanol

    , Article Chemical Engineering and Technology ; Volume 34, Issue 10 , 2011 , Pages 1715-1722 ; 09307516 (ISSN) Hashemi, N ; Pazuki, G ; Vossoughi, M ; Hemmati, S ; Saboohi, Y ; Sharif University of Technology
    Abstract
    A steady-state equilibrium-stage model based on MESH equations was proposed to simulate saline extractive distillation columns. The interaction parameters between each component of water-CaCl 2 and ethanol-water were obtained from mean ionic activity coefficients and vapor-liquid equilibrium (VLE) experimental data. Additionally, the interaction coefficients for the ethanol-CaCl 2 pair were fitted to experimental VLE data which were reported by Nishi for the ethanol-water-CaCl 2 system. It should be noted that adjustable parameters between each pair were considered to be temperature dependent. The results confirmed that the proposed model could accurately predict the experimental... 

    Measurement and correlation of surface tension for single aqueous electrolyte solutions

    , Article International Journal of Thermophysics ; Volume 31, Issue 4-5 , May , 2010 , Pages 852-859 ; 0195928X (ISSN) Sadeghi, M ; Taghikhani, V ; Ghotbi, C ; Sharif University of Technology
    2010
    Abstract
    In this study, the values of the surface tension for a number of single aqueous electrolyte solutions were measured at various temperatures and electrolyte concentrations using the well-known and computer-aided pendant-drop method. In order to conduct the experimental measurements, a high-pressure IFT-700 apparatus, equipped with a view cell and a data acquisition system, was used. The systems studied in this study were aqueous solutions of KCl, NaCl, CaCl 2, and Na 2SO 4. The pooled standard deviation and the confidence limit of the surface-tension data for a 95 % confidence level were determined to be 0.17mN · m -1 and σ̄ ± 0.19, respectively. It should be noted that while the surface... 

    A study on plant polymer: pectin production and modification

    , Article International Journal of Engineering, Transactions B: Applications ; Volume 23, Issue 2 , 2010 , Pages 107-114 ; 1728-144X (ISSN) Alemzadeh, I ; Sharif University of Technology
    Abstract
    Pectin from two different plant sources: apple and sugar beet was studied. Apple pectin was modified by chemical treatments such as: acid, alkali and ammonia, so as to obtain an ester level equal to or less than 50 %, which is described as low methoxyl (LM) pectin. LM pectin form gels with significant characteristic. In this study, de-esterification of apple pectin with acid treatment resulted in gel specification with higher molecular weight and viscosity. Acid treatment resulted in pectin with average molecular weight of 32000 Dalton. Pectin was extracted from sugar beet pulp by acid and alkali treatments. The quality of gel formation and water uptake was improved using sugar source... 

    Calcium chloride adsorption at liquid-liquid interfaces: A molecular dynamics simulation study

    , Article Colloids and Surfaces A: Physicochemical and Engineering Aspects ; Volume 527 , 2017 , Pages 70-80 ; 09277757 (ISSN) Khiabani, N. P ; Bahramian, A ; Chen, P ; Pourafshary, P ; Goddard, W.A., III ; Ejtehadi, M. R ; Sharif University of Technology
    Abstract
    We carried out molecular dynamics simulations (MD) to investigate the adsorption of calcium chloride (CaCl2) at n-hexane-water interfaces. We also measured the interfacial tensions (IFT) of the selected systems making use of the pendant-drop method. The histograms of hexane, water, and the ions indicate an electrical double layer (EDL) near the interface. The trend of the EDL indicates that chloride anions intend to adsorb to the interface more intrinsically than calcium cations. The measured interfacial width of the n-hexane-water interfaces decreases with the salt concentration. The average densities of the interfacial and bulk aqueous solutions demonstrate density heterogeneity in the... 

    Optimization of l-asparaginase immobilization onto calcium alginate beads

    , Article Chemical Engineering Communications ; Volume 204, Issue 2 , 2017 , Pages 216-220 ; 00986445 (ISSN) Bahraman, F ; Alemzadeh, I ; Sharif University of Technology
    Taylor and Francis Ltd  2017
    Abstract
    In this study, anti-leukemic enzyme L-asparaginase (E.C.3.5.1.1) from Escherichia coli ATCC 11303 was modified by the microencapsulation technique onto calcium alginate beads. Using response surface methodology (RSM), a three-level full factorial design, the values of concentration of sodium alginate, concentration of calcium chloride, and enzyme loading were investigated to obtain the highest residual L-asparaginase (L-ASNase) activity % (immobilized enzyme activity/free enzyme activity). The effects of the studied factors on immobilization were evaluated The predicted values by the model were close to the experimental values, indicating suitability of the model. The results presented that... 

    Ion-pair extraction-reaction of calcium using Y-shaped microfluidic junctions: An optimized separation approach

    , Article Chemical Engineering Journal ; Volume 334 , 2018 , Pages 2603-2615 ; 13858947 (ISSN) Foroozan Jahromi, P ; Karimi Sabet, J ; Amini, Y ; Sharif University of Technology
    Elsevier B.V  2018
    Abstract
    In this research, a continuous microsolvent extraction-reaction was developed for the efficient separation of calcium ion. This study gives a preliminary possible practical application of microfluidic devices in chemical exchange reaction for enrichment of 48Ca stable isotope. For this purpose, in the first stage, the hydrodynamic behavior of two immiscible liquids in a simple Y-shaped microfluidic junction is experimentally investigated, and then ion-pair extraction-reaction of Ca2+ using picric acid as a counter-ion and dicyclohexano-18-crown-6 (DC18C6) as a lipophilic ionophore is studied in this microfluidic and conventional batch method. The impact of main process parameters, including... 

    A pH-sensitive carrier based-on modified hollow mesoporous carbon nanospheres with calcium-latched gate for drug delivery

    , Article Materials Science and Engineering C ; Volume 109 , 2020 Asgari, S ; Pourjavadi, A ; Hosseini, S. H ; Kadkhodazadeh, S ; Sharif University of Technology
    Elsevier Ltd  2020
    Abstract
    A novel nanocarrier based-on hollow mesoporous carbon nanospheres (HMCNs) with primary amines on its surface, a large cavity, and good hydrophilicity was synthesized by a hydrothermal reaction. The primary amine functionalities on the mesoporous carbon were used as the initiation sites for growing poly (epichlorohydrin) (PCH) chains. The chlorine groups in the side chain of PCH were replaced with imidazole as the pendant groups. Calcium chloride (CaCl2) was applied as a capping agent. The coordination bonding was formed between pendant imidazole groups and calcium ions. Doxorubicin (DOX) was selected as a model of hydrophilic anticancer drug and was loaded onto the nanocarrier and released... 

    Magnetic/pH-sensitive κ-carrageenan/sodium alginate hydrogel nanocomposite beads: Preparation, swelling behavior, and drug delivery

    , Article Journal of Biomaterials Science, Polymer Edition ; Vol. 25, issue. 17 , 2014 , p. 1891-1906 Mahdavinia, G. R ; Rahmani, Z ; Karami, S ; Pourjavadi, A ; Sharif University of Technology
    Abstract
    This work describes the preparation of magnetic and pH-sensitive beads based on κ-carrageenan and sodium alginate for use as drug-targeting carriers. Physical cross-linking using K+/Ca2+ ions was applied to obtain ionic cross-linked magnetic hydrogel beads. The produced magnetite beads were thoroughly characterized by TEM, SEM/EDS, XRD, FTIR, and VSM techniques. While the water absorbency (WA) of magnetic beads was enhanced by increasing the weight ratio of κ-carrageenan, introducing magnetic nanoparticles caused a decrease in WA capacity from 15.4 to 6.3 g/g. Investigation on the swelling of the hydrogel beads in NaCl, KCl, and CaCl2 solutions revealed the disintegration of beads depending... 

    Phenols removal by immobilized horseradish peroxidase

    , Article Journal of Hazardous Materials ; Volume 166, Issue 2-3 , 2009 , Pages 1082-1086 ; 03043894 (ISSN) Alemzadeh, I ; Nejati, S ; Sharif University of Technology
    2009
    Abstract
    Application of immobilized horseradish peroxidase (HRP) in porous calcium alginate (ca-alginate) for the purpose of phenol removal is reported. The optimal conditions for immobilization of HRP in ca-alginate were identified. Gelation (encapsulation) was optimized at 1.0% (w/v) sodium alginate in the presence of 5.5% (w/v) of calcium chloride. Upon immobilization, pH profile of enzyme activity changes as it shows higher value at basic and acidic solution. Increasing initial phenol concentration results in a decrease in % conversion. The highest conversion belongs to phenol concentration of 2 mM. Investigation into time course of phenol removal for both encapsulated and free enzymes showed... 

    Characterization of ionic composition of TSP and PM10 during the Middle Eastern Dust (MED) storms in Ahvaz, Iran

    , Article Environmental Monitoring and Assessment ; Volume 184, Issue 11 , November , 2012 , Pages 6683-6692 ; 01676369 (ISSN) Shahsavani, A ; Naddafi, K ; Jaafarzadeh Haghighifard, N ; Mesdaghinia, A ; Yunesian, M ; Nabizadeh, R ; Arhami, M ; Yarahmadi, M ; Sowlat, M. H ; Ghani, M ; Jonidi Jafari, A ; Alimohamadi, M ; Motevalian, S. A ; Soleimani, Z ; Sharif University of Technology
    2012
    Abstract
    Because of the recent frequent observations of major dust storms in southwestern cities in Iran such as Ahvaz, and the importance of the ionic composition of particulate matters regarding their health effects, source apportionment, etc., the present work was conducted aiming at characterizing the ionic composition of total suspended particles (TSP) and particles on the order of ∼10 μm or less (PM10) during dust storms in Ahvaz in April-September 2010. TSP and PM10 samples were collected and their ionic compositions were determined using an ion chromatography. Mean concentrations of TSP and PM10 were 1,481.5 and 1,072.9 μg/m 3, respectively. Particle concentrations during the Middle Eastern... 

    Design of experiment, preparation, and in vitro biological assessment of human amniotic membrane extract loaded nanoparticles

    , Article Current Pharmaceutical Biotechnology ; Volume 21, Issue 3 , 2020 , Pages 256-267 Shabani, A ; Atyabi, F ; Khoshayand, M. R ; Mahbod, R ; Cohan, R. A ; Akbarzadeh, I ; Bakhshandeh, H ; Sharif University of Technology
    Bentham Science Publishers  2020
    Abstract
    Background: Human amniotic membrane grafting could be potentially useful in ocular surface complications due to tissue similarity and the presence of factors that reduce inflammation, vascu-larization, and scarring. However, considerations like donor-derived infectious risk and the requirement of an invasive surgery limit the clinical application of such treatments. Moreover, the quick depletion of bioactive factors after grafting reduces the efficacy of treatments. Therefore, in the current study, the possibility of nano delivery of the bioactive factors extracted from the human amniotic membrane to the ocular surface was investigated. Materials and Methods: Nanoparticles were prepared...