Sharif Digital Repository

Because of mistakes in the design and calculation, incoherence between construction and design, structural changes, changes in loads and also damages caused by the passage of the time, concrete structures need to be improved and strengthened. Polymeric sheets reinforced by fibers (FRP), according to their appropriate characteristic, are more efficient for strengthening concrete structures. Most studies on confined columns refers to confined RC columns with FRP and less mentioned about prestressed columns. In this study, the behavior of prestressed columns is analyzed by modeling a case of prestressed column in a nonlinear analysis software. Samples of confined concrete columns with CFRP and... 

Masonry structures are complex systems that require a thorough and detailed knowledge for analysis and designing, and especially maintaining their capability. Since the old historical masonry structures have cultural value, maintenance of such structures against natural disasters that cause destruction is important. The goal of this research is to find a method for protection of the historical masonry structure of Daniel shrine that is located in susa region in Khuzestan. According to the reference structures of architectural heritage, a number of challenges in conservation, diagnosis, analysis, monitoring, repair and strengthening are presented that limit the application of modern codes... 

Buried pipes are among the most important urban infra-structures which are developed to distribute water, gas, oil, etc.. Researchers have already demonstrated that extreme failures which lead to total disruption of the pipelines, both mains and the distribution network, due to permanent ground displacement in fault zones. In order to avoid any disturbance in the regular performance of pipelines and prevention of environmental contamination, there is a need to investigate the vulnerability of pipelines and their seismic retrofitting, if necessary. In the presented study, the method of pipeline retrofitting by high strength CFRP composite is investigated. In that regard, using a 3D model of... 

The strengthening of reinforced concrete structures with externally bonded fibre reinforced polymer (FRP) laminates has shown excellent performance, so this technology is rapidly replacing externally bonded steel plates, steel or concrete jackets, and many traditional techniques available. In this study strengthening of reinforced concrete beams by GFRP to reduce creep deflection is investigated by mathematical method using available relations. Five RC beams with different dimensions, with and without strengthening with GFRP laminate, were investigated for their creep deflection. The creep coefficient of beams selected from experimental result that were mentioned in RILEM DATA BANK. In this... 

Progressive collapse in the structures can be happened as a result of many events such as terrorist attack, planes or vehicle collision to the structures and etc. Researchers’ attention to this phenomenon after occurring progressive collapse in Ronan Point building attracted and by happening terroristic attacks in Alfred P. Murrah and WTC buildings, studies in this field has developed extensively, meanwhile some of the codes, including UFC 4-023-03 or GSA, have proposed general instructions and analytical methods for increasing the strength of the structure against progressive collapse. If the structure in this analysis, does not meet the acceptance criteria of the code, the structure must... 

Wall systems are an essential part of the buildings and their capacity should be properly considered in their design. However, the seismic behavior of building systems with in-filled walls and their interaction is a very complex issue, yet to be understood. Using the in-filled walls in the buildings without including them in the design process changes the whole behavior of the structural system as well as their failure mechanism under earthquake excitations. On the other hand, there have been extensive researches on rehabilitation of the structures with in-filled walls or designing them as the main or one of the lateral load carrying systems against seismic input. In this research, first the... 

Most of the investigations during the two past decades focused on the effect of moisture and temperature on the bond at the interface of carbon or glass-fabrics and concrete, masonry or timber. Few investigations have studied the effect of chemical solutions, dry heat exposure and ultravilolent (UV) radiation on the bond at the interface of other types of fiber reinforced-polymers (FRPs) and masonry, timber and concrete in the short and long terms. Therefore, this research aims to investigate the effect of five chemical solutions with pH of 2.5±0.1, 7±0.1, 7.25±0.1, 10±0.1 and 12.5±0.1 on the interfacial bond strength between seven types of FRPs (unidirectional, bidirectional and hybrids)... 

Today, many evidences, including the distribution of galactic velocities, gravitational lensing observations, and the cosmic microwave background, show that there exist dark matter (non-baryon matter) in large-scale cosmological structures that are stable, free of charge and without color, which has gravitational interaction like normal matter. The hypothesis that weakly interacting massive particles (WIMPs) as a dark matter candidate with mass range of several tens of GeV to several teV and with the typical couplings of Electroweak order of magnitude, is an attractive and desirable model, Which naturally explains the density of cosmic dark matter in agreement with observations. Alongside... 

The flexural behavior of reinforced concrete beams through application of FRP is studied, considering FRP-concrete bonding. Moreover, the nonlinear behavior of concrete (generation of crack and crush) is taken into consideration. Different parameters such as the number of layers of CFRP sheets, the effect of tensile reinforcing bars, the effect of using glass fibers, and modeling resin layer between the concrete and FRP are investigated. The results are compared with the existing experimental tests and those obtained from analytical method, ACI 440.2R-08 and ISIS Canada. The results show that by adding CFRP sheet to the control beam, the stiffness and flexural strength of the beam improves... 

Reinforced concrete (RC) column in building often needs strengthening either due to defects in the column themselves, having to support higher loads than those foreseen in the initial design of the structure or as the result of ageing or accidental damage such as earthquake force. The use of FRP wrapping, steel caging or reinforce concrete jacketing for this purpose is now a common practice in many countries throughout the world. Even though a considerable number of researches have been conducted on retrofitting methods during past years, but very limited researches have been done to compare these methods. This research has investigated the effect of jacketing from different views. The... 

Retrofitting of reinforced concrete and steel structures is a very important issue in Structural Engineering due to the reasons such as drawbacks in previous codes, revision of application of structures , destructive environmental factors and deficiencies in construction process.
Strengthening of structures with FRP composites is one of the methods that have been welcomed by researchers due to its unique properties including high tensile strength, light weight, simple application and resistance to corrosive environment. Although the main purpose of retrofitting is to increase the overall load carrying capacity of the structures, the failure mechanism of the strengthened member is also... 

This paper aims at investigating the seismic behavior of strengthened reinforced concrete (RC) shear walls using a 3D finite element analysis. A series of four different configurations of carbon fiber reinforced polymer (CFRP) composites, four different schemes of steel elements and two different schemes of concrete jacket are utilized to compare the two methods of retrofitting RC shear walls with similar dimensions and reinforcement ratios. Nonlinear simulations of the RC shear walls are conducted under the action of lateral cyclic loading in ABAQUS Explicit software. In addition, the numerical modeling for RC walls strengthened by CFRP composites as well as steel elements are validated... 

Fiber-reinforced polymer (FRP) composites have been used tremendously to repair and rehabilitate timber structures due to their formability, ease of use, and high specific strength. The quality of the bond between FRP and timber substrate is critical for having complete composite action. In this paper, a comprehensive set of linear and nonlinear ultrasonic methods was performed to investigate the bond between carbon-FRP (CFRP) and timber. For this purpose, one hundred and twenty-six specimens of reinforced timber were prepared. Two techniques were considered to bond CFRP and timber: 1) externally bonded reinforcement (EBR) and 2) externally bonded reinforcement on the groove (EBROG). The... 

The rehabilitation of old structures holds a lot of importance, as many structures with a life span of over 30 years are prone to severe damage and even collapse. To overcome this problem, the use of FRP sheets to strengthen structures is suggested. RC-arches have been used in many structures such as bridges and require specific consideration in terms of strengthening. So far, the influence of the number of FRP layers and location, the height of arch and percentage of reinforcement on strengthened arch behavior have not been investigated. In this research, reinforced concrete arch members strengthened with GFRP and CFRP were investigated. A total of 28 Specimens, including four... 

Despite extensive studies on the behavior of reinforced concrete slabs, especially those reinforced with steel rebars, no comprehensive studies have been conducted on the behavior of concrete slabs reinforced with FRP rebars. Therefore, there are some ambiguities regarding the tensile and compressive behavior of these rebars in the load-bearing capacity of reinforced concrete slabs (depending on their amount in the slab and their combination with steel rebars). Hence, in this study, in order to ensure the accuracy of numerical simulations, the numerical 3D simulation of a one-way concrete slab reinforced with tensile FRP rebars was performed using the finite element Abaqus software....