Loading...
Search for:
chromium-coating
0.006 seconds
Effects of Additives on Chromium Coating in Trivalent Chromium Bath
, M.Sc. Thesis Sharif University of Technology ; Dolati, Abolghasem (Supervisor)
Abstract
In this work, effects of different additives on trivalent Chromium bath and Chromium coating has been investigated. Malonic acid wich had been used as a complexing agent of the bath improved current efficiancy and coating quality obviously. Effects of Magnesum, zinc, Tin, Aluminium sulfates, Molybdic acid, TiO2 nano particles, Sodium hypophospite, formaldehead and mixtures of these compositions on hexavalent Chromium concentration of the bath were also studied. Concentration of Cr6+ ion decreased by 18 ppm due to adding these materials. Using Ti/ TiO2/ RuO2 Anode also could decrease Cr6+ concentration by 78 ppm. Remarkable results had been recorded in current efficiency and coating...
Pulse Electrodeposition of Chromium Coating From Trivalent Bath and Studying it’s Properties
, M.Sc. Thesis Sharif University of Technology ; Ghorbani, Mohammad (Supervisor) ; Dolati, Abolghasem (Supervisor)
Abstract
Trivalent chromium plating has been known as a very promising technology to replace hexavalent chromium which is so toxic. The coatings obtained from tivalent chromium baths have lower thickness and Hardness and higher corrosion rate in comparison with deposits obtained from hexavalent chromium baths.A few studies on pulse plating of trivalent chromium as an effective way to enhance the coating properties have been published.
In this research glycine was chosen as complexing agent.The results have shown that in pulse plating at 1 Hz, Duty cycle 50%, peak current density 0/2 A/Cm2 and after 30 minutes, thickness achieves 13 µm which is much greater in comparison with coatings obtained in...
In this research glycine was chosen as complexing agent.The results have shown that in pulse plating at 1 Hz, Duty cycle 50%, peak current density 0/2 A/Cm2 and after 30 minutes, thickness achieves 13 µm which is much greater in comparison with coatings obtained in...
The Comparison Between TiN and Hard Chromium Coatings
, M.Sc. Thesis Sharif University of Technology ; Dolati, Abolghasem (Supervisor)
Abstract
This research focuses on finding an appropriate method for increasing wear and corrosion resistance of hard coating TiN PVD and chromium. The substrate was made up of 42CrMo4 (DIN) steel (used for marine industries) and coated by TiN Arc PVD process and hard chromium electro-deposition. The results of these two coatings are compared and the better coating which is TiN Arc PVD is suggested. To find the best method for coating, several test studies are organized such as: the mechanical and tribological properties of TiN PVD and hard chromium coatings for wear and corrosion resistance applications are organized. The potentiodynamic polarization technique was used to measure the corrosion rate...
Experimental investigation and artificial neural network modeling of warm galvanization and hardened chromium coatings thickness effects on fatigue life of AISI 1045 carbon steel
, Article Journal of Failure Analysis and Prevention ; Volume 17, Issue 6 , 2017 , Pages 1276-1287 ; 15477029 (ISSN) ; Maleki, E ; Sharif University of Technology
Abstract
In the present study, the main purpose is investigation of the coatings thickness effect on the fatigue life of AISI 1045 steel. Herein, two different coatings of warm galvanization and hardened chromium have been used on the specimens. Fatigue tests were performed on specimens with different coating thicknesses of 13 and 19 µm. In the high-cycle level, S–N curves are extracted with 13 points for each sample. The results show that the galvanized coating is the most appropriate coating with low thickness, but with significant increasing of coating thickness, the best choice is hardened chromium coating. However, artificial neural network (ANN) has been used as an efficient approach instead of...