Sharif Digital Repository

Abstract: The loading of co-catalyst is an efficient way to increase the activity of synthesized carbon-based photocatalysts in the energy and environmental applications. Herein, Co and Ni decorated on g-C3N4 was synthesized as a visible light active photocatalyst and characterized with XRD, FT-IR, BET, DRS, TGA, FE-SEM, EDX, and EIS techniques. From the characterization results, it was demonstrated that cobalt and nickel which were present in the structure of the nanocatalyst, were in the metallic form. The decoration of Ni and Co reduced bandgap energy of g-C3N4 and made the synthesized nanocomposite active under visible light. The operating condition of O2 photocatalytic generation was... 

To overcome recent energy and environment challenges, developing efficient and low cost photocatalysts are unavoidable. In this context, design of semiconductor nanostructures modified with earth abundant co-catalysts for water splitting reactions requires well engineered and controlled process to optimize surface interface and maximize nanocomposite system efficiency. Here, TiO2 nanotube were synthesized electrochemically and decorated with cobalt based nanostructure co-catalyst for water oxidation reaction using low cost and scalable electro-deposition approach. By changing deposition parameters and complete studying on samples surface morphology and related statistical analysis data,... 

Hematite (α-Fe2O3) is a promising candidate for water oxidation applications due to its abundance in the earth crust and its suitable bandgap. However, hematite performance is severely limited by electron-hole recombination at its interface with the electrolyte; something that can be addressed using electrocatalysts. In this report, we evaluate the influence of a ternary NiFeCo co-catalyst to enhance the water oxidation performance of hematite photoanodes. Thus, NiFeCo co-catalyst is optimized for hematite thin films with i) dense and ii) porous (nano-rod) morphologies. Both hematite films are prepared using electron beam evaporation method followed by an annealing step and NiFeCo... 

The great promise of electrochemical water splitting for green and sustainable hydrogen fuel production has motivated researchers to strive for more efficient and low-cost catalysts based on non-precious metals. In this study, MoS2 nanoflowers decorated with CuCo2O4 were successfully synthesized, and their catalytic activities toward the electrochemical hydrogen evolution reaction (HER) in an alkaline medium were investigated. The composition, structure, and morphology of the as-synthesized catalysts were explored by various techniques such as FT-IR, XRD, BET, SEM, and TEM. To maximize the catalytic activity, the composition of the nanocomposites was systematically varied. Catalytic results... 

The synthesis of mono- and bi-supported Ziegler-Natta catalysts using magnesium etoxide Mg(OEt)2 and graphene oxide (GO) as catalyst support for production of Ultra High Molecular Weight Polyethylene (UHMWPE) is reported in this investigation. Nano-graphene oxide was prepared by the modified Hummer's method and its structure was analyzed by XRD and FTIR indicating the presence of hydroxyl groups on graphene oxide and the formation of an exfoliated structure. The activity of TiCl4/Mg(OEt)2, TiCl4/Mg(OEt)2-GO, and TiCl4/GO catalysts in terms of grams of PE produced per mmol of Ti per hour was experimentally obtained for catalysts with different ratios of co-catalyst (triisobutylaluminium) to... 

Methane steam reforming (MSR) is an assuring reaction using steam to produce H2 as clean energy over a nicκel-based catalyst. We synthesized mesoporous monometallic NiMgAl2O4 and bimetallic NiCoMgAl2O4 catalysts in a two-step combustion method using a mix of fuels and powder metallurgy. BET-BJH, XRD, TGA, TPR, FESEM, and EDX-mapping characterized surface area, porosity, morphology, crystalline structure, and metal-support interaction behavior. The products exhibited strong interaction of well-structured MgAl2O4 spinel with NiO, in both specimens. The MSR evaluation tests at 750 °C under atmospheric pressure, CH4:H2O feed ratio of 1:1.2 showed the bimetallic catalyst has the highest... 

An experimental investigation was conducted on the oxidative desulfurization of model sulfur compounds such as dibenzothiophene and benzothiophene in toluene as a simulated light fuel oil with a mixture of hydrogen peroxide as the oxidant and various acids as the catalyst. The influences of various parameters including reaction temperature (T), acid to sulfur molar ratio (Acid/S), oxidant to sulfur molar ratio (O/S), type of acid, and the presence of sodium tungstate and commercial activated carbon as a co-catalyst on the fractional conversion of the model sulfur compounds were investigated. The experimental data obtained were used to determine the reaction rate constant of the model sulfur... 

This paper is devoted to investigation of morphological and physical-mechanical properties of polyethylene (PE)/clay nanocomposites prepared via in situ polymerization method using bi-supported Ziegler-Natta catalyst. Bentonite type clay and MgCl2 (ethoxide type) were used as the support of TiCl4. Catalyst support and polymerization process have been done in slurry phase using Triisobutylaluminum as the co-catalyst. The microstructure of the nanocomposites was examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD and TEM indicated that almost fully exfoliated PE/clay nanocomposites were produced successfully using this method. According to permeability...