Sharif Digital Repository

In this article a series of experiments were performed to demonstrate the effect of carbon dioxide injection pressure on a huff and puff process. The experimental data are used in a lab-scale model simulated with a commercial simulator to investigate the effect of soaking time, injection pore volume, and rate of injection on the heavy oil recovery. The result of experiments showed that a huff and puff process under miscible pressure conditions gives the most recovery. Simulation results illustrated that there is an optimum value for soaking time, which, for soaking times less than this value, recovery increases and for values greater than optimum the recovery decreases. The simulation study... 

The authors studied deposition and entrainment of asphaltene particles as major mechanisms that occur in porous media. Deposition mechanisms that contribute to permeability reduction and entrainment of deposited particle improve the damaged permeability value. While in most previous works the effects of entrainment mechanism are considered negligible, in this study miscible CO2 injection tests were conducted by core flood apparatus to investigate the effect of asphaltene deposition on permeability and porosity alterations. Results indicated that proposed model for entrainment mechanism is affected by deposition mechanism. The asphaltene deposition core's characteristics have undeniable roles... 

An upscaling method such as renormalization converts a detailed geological model to a coarse one. Although flow equations can be solved faster on a coarse model, its results have more errors. Numerical dispersion, heterogeneity loss, and connectivity misrepresentation are the factors responsible for errors. Connectivity has a great effect on the fluid distribution and leakage pathways in EOR processes or CO2 storage. This paper deals with the description and quantification of connectivity misrepresentation in the upscaling process. For detection of high-flow regions, the flow equations are solved under simplified single-phase conditions. These regions are recognized as the cells whose fluxes... 

CO2 injection is a potentially viable method of enhanced oil recovery for medium oil reservoirs. The authors compare the effect of gas injection strategy (simultaneous water-alternating gas [SWAG], water-alternating gas [WAG], and continuous gas injection [CGI]) on recovery in immiscible, near-miscible, and miscible modes of injection. It has been proved that CGI is not the most efficient injection scenario in oil-wet reservoirs. Miscible and near-miscible core flood tests demonstrated high oil recoveries in all injection strategies due to high capillary numbers achieved as a result of miscibility. The fluid mechanics of floods were discussed using pressure drop data, different mechanics was... 

Asphaltene deposition during enhanced oil recovery (EOR) processes is one of the most problematic challenges in the petroleum industry, potentially resulting in flow blockage. Our understanding of the deposition mechanism with emphasis on the rate of the asphaltene deposition is still in its infancy and must be developed through a range of experiments and modelling studies. This study aims to investigate the rate of asphaltene deposition through a visual study under different gas injection scenarios. To visualise the asphaltene deposition, a high-pressure setup was designed and constructed, which enables us to record high-quality images of the deposition process over time. Present research... 

Minimum Miscibility Pressure (MMP) is regarded as one of the foremost parameters required to be measured in a CO2 injection process. Therefore, a reasonable approximation of the MMP can be useful for better development of injection conditions as well as planning surface facilities. In this study, the impact of asphaltene content ranging from 3.84 % to 16 % on CO2/heavy oil MMP is evaluated. In this respect, slim tube miscibility and Vanishing Interfacial Tension (VIT) tests are used. Regarding the VIT test, the Interfacial Tension (IFT) is measured by means of two methods including pendant drop and capillary apparatuses, and thereafter the MMP measurement error between slim tube and VIT... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

Thermodynamic modeling is known as a promising tool for phase behavior modeling of asphaltene precipitation under different conditions such as pressure depletion and CO2 injection. In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, while the oil and gas phases are modeled with an equation of state. The PR-EOS was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on an improved solid model has been developed and used for predicting asphaltene precipitation data for one of... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

To study the gas injection scenario for successful implementation of enhanced oil recovery (EOR)processes, the prediction of interfacial tension (IFT)between injected gas and the crude oil is of paramount significance. In the present study, some intelligent methods were developed for determining IFT values between supercritical CO2 and normal alkanes. IFT was considered as a function of temperature, pressure, and molecular weight of normal alkanes. The developed methods were Multilayer perceptron (MLP), Genetic Algorithm Radial Basis Function (GA-RBF), and Conjugate Hybrid-PSO ANFIS (CHPSO-ANFIS). The average absolute percent relative errors (AAREs)for the stated techniques were found to be...