Loading...
Search for:
coating-properties
0.011 seconds
Zn-Ni Electrophosphating on galvanized steel using cathodic and anodic electrochemical methods
, Article Surface and Coatings Technology ; January , 2015 ; 02578972 (ISSN) ; Afshar, A ; Aliabadi, A ; Sharif University of Technology
Elsevier
2015
Abstract
Electrophosphating is the novel method for accelerating the low temperature phosphating bath. This method can be performed as cathodic and anodic treatments. Both of them influence the coating deposition mechanism and therefore coating properties. In this study Zn-Ni electrophosphate coating was applied on galvanized steel using cathodic and anodic electrochemical methods. Microstructure, composition and corrosion resistance of coating were characterized by using a scanning electron microscopy, X-ray diffraction method and potentiodynamic polarization test respectively. The results of this study indicated that, by using cathodic method, compact phosphate coating with high corrosion...
Zn–Ni electrophosphating on galvanized steel using cathodic and anodic electrochemical methods
, Article Surface and Coatings Technology ; Volume 306 , 2016 , Pages 497-505 ; 02578972 (ISSN) ; Afshar, A ; Aliabadi, A ; Sharif University of Technology
Elsevier B.V
2016
Abstract
Electrophosphating is the novel method for accelerating the low temperature phosphating bath. This method can be performed as cathodic and anodic treatments. Both of them influence the coating deposition mechanism and therefore coating properties. In this study Zn–Ni electrophosphate coating was applied on galvanized steel using cathodic and anodic electrochemical methods. Microstructure, composition and corrosion resistance of coating were characterized by using a scanning electron microscopy, X-ray diffraction method and potentiodynamic polarization test respectively. The results of this study indicated that, by using cathodic method, compact phosphate coating with high corrosion...
Electrochemical deposition of Ni-TiN nanocomposite coatings and the effect of sodium dodecyl sulphate surfactant on the coating properties
, Article Bulletin of Materials Science ; Volume 39, Issue 4 , 2016 , Pages 1021-1027 ; 02504707 (ISSN) ; Dolati, A ; Aghababazadeh, R ; Lalegani, Z ; Sharif University of Technology
Indian Academy of Sciences
2016
Abstract
Ni-TiN nanocomposite coatings were prepared by using electrochemical deposition in a Watt's bath containing TiN particles to increase the hardness of Ni. The effects of deposition current density, electrolyte agitation speed and the number of particles in the solution on the amount of incorporated particles in the coating process were investigated. The optimum deposition current density of 4 A dm-2 and agitation speed of 450 rpm were obtained. The effect of sodium dodecyl sulphate (SDS) anionic surfactant on the amount of particles in the coatings was investigated. It was observed that the maximum amount of incorporated particles, with a value of 7.5% by volume, was created in the current...
Plasma electrolytic oxidation of Mg-Ti couple metals fabricated by friction stir welding: Characterization and corrosion studies
, Article Materials Research Express ; Volume 6, Issue 8 , 2019 ; 20531591 (ISSN) ; Ghorbani, M ; Barati Darband, G ; Sharif University of Technology
Institute of Physics Publishing
2019
Abstract
In this study, plasma electrolytic oxidation (PEO) of Ti-Mg couple metal fabricated by friction stir welding (FSW) in silicate base solution has been addressed and effect of silicate concentration in the electrolyte on coating properties was studied. Microstructure, composition and corrosion resistance of coating were characterized using scanning electron microscopy(SEM), X-ray diffraction (XRD) and potentiodynamic polarization methods. Ti-Mg couple were successfully coated simultaneously in silicate electrolyte and results of this study indicated that silicate concentration has a considerable impact on microstructure and corrosion resistance of the coating. In 5 g l-1 sodium silicate...