Sharif Digital Repository

Recycling of polymers, with the aim of environmental protection and economical benefits, is important procedure, which is constantly developing. In this study the effect of the incorporation of recycled PET(r-PET) and recycled polypropylene/Flax(r-PP/Flax) to PP at low (20wt %) and medium content (40wt %) of r-PET was investigated. Polymer compounds were prepared by twin screw extruder followed by injection moulding. The effect of r-PP/Flax and r-PET on PP was evaluated using different techniques such as scanning electron microscopy (SEM), differential scanning calorimetery (DSC), rheological behavior, and mechanical properties (tensile modulus, yield strength, and charpy notched impact... 

Nanocomposite films based on low density polyethylene (LDPE), containing of 2, 3, and 4 wt% organoclay (OC) and ethylene vinyl acetate (EVA) copolymer as a new compatibilizer were prepared and characterized using X-ray diffraction, tensile tests, and oxygen permeation measurements. There was no exfoliation or intercalation of the clay layers in the absence of EVA, while an obvious increase in d-spacing was observed when the samples were prepared with EVA present. This issue was reflected in the properties of nanocomposites. The oxygen barrier properties of the OC/EVA/LDPE film were significantly better than those of the OC/LDPE film. The average aspect ratio of clay platelets in... 

Polypropylene (PP) is a fast growing polymer, particularly in automotive industry, where PP compounds have replaced many different parts made of conventional materials. In the first step, PP-g-MA, as compatibilizer, was synthesized. Two kinds of polypropylenes including a homo- and a block co-polymer were incorporated for this goal. Characterizations via titration and FTIR tests revealed higher degree of grafting reaction when homo-polymer was used for synthesizing PP-g-MA. In the next step, nanocomposites containing 3 wt% nanoclay with three different PP-g-MA/nanoclay ratios of 1:1, 2:1 and 3:1were made using a co-rotating twin screw extruder. Tensile, impact and XRD tests were performed to... 

In this research, we studied the effect of compatibilizer and short glass fiber on microstructure and mechanical properties of PBT/PC blends. Fisrt, Antioxidants and sodium pyrophosphate dibasic were used to suppress transesterification in PBT/PC Blend. The results showed that best composition occur when both of them are used. In the next step, we used 3%wt MBS (methyl methacrylate-butadiene-styrene) and saw that this weight percent of this compatibilizer doesn’t useful. Moreover addition of short glass fiber to PBT/PC was examined and the results showed that mechanical properties of composite are extensively increased. Also in this step, we proved this idea that we can replace some of PBT... 

Polycarbonate is one of the thermoplastic engineering polymers, which due to its desirable properties of high resistance, high toughness, thermal insulation, non-flammability and resistance to ultraviolet rays (UV) have many applications in the construction industry, medicine, transportation industry and transfer. and has electronic components. One of the disadvantages of polycarbonate is the high cost of raw materials for its production. Therefore, due to the fact that this polymer and its high volume of production and the low cost of recycling, it finds its recycling. The characteristics after recycling and during it, due to exposure to high environments and mechanical destruction and...