Sharif Digital Repository

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

A comprehensive understanding of the role of reservoir heterogeneities induced by flow barriers and connate water on sweep efficiency of different EOR scenarios is rarely attended in the available literature. In this work, different miscible/immiscible EOR processes were conducted on various one-quarter five-spot glass micromodels incorporating small-scale flow barriers. Microscopic and macroscopic observations revealed the reduction of sweep efficiency, premature breakthrough of displacing fluids, the severity of fingering at displacement front which leaves a large amount of oil behind the flow barriers untouched, and significant increasing trend of oil recovery after breakthrough in the... 

Carbonated water injection (CWI) is known as an efficient technique for both CO2 storage and enhanced oil recovery (EOR). During CWI process, CO2 moves from the water phase into the oil phase and results in oil swelling. This mechanism is considered as a reason for EOR. Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials. Generally, instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon. Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

Connate water has been coexisting with oil and mineral for centuries within underground reservoirs. The oil recovery techniques, such as low salinity water injection, disturb this prolonged equilibrium state of oil/brine/rock system. However, a thorough understanding of this complex equilibrium in the reservoir is still lacking. In this study, we performed molecular dynamics simulations to provide quantitative comprehension of the thin brine film characteristics that wets carbonate reservoir rocks at molecular level. While an electric double layer is formed at the interface of calcite/low salinity water, the ions in the high saline water form several aggregates of ions. We found that these... 

Plenty of oil reservoirs contain discontinuous shale layers that act as flow barriers. Therefore, understanding their influences on reservoir performance, especially during enhanced oil recovery (EOR) processes, is of great importance. For this purpose, several experiments of water and alkaline-surfactant-polymer (ASP) flooding have been performed on a number of one-quarter five-spot micromodels that contain various configurations of shale layers to simulate shaly porous media. Several features, such as various shale geometrical characteristics and the presence of connate water saturation, were investigated at both macro- and micro-scales. The presence of shales resulted in earlier... 

This study concerns with the microscopic and macroscopic fluid distribution and flow behavior during water alternating solvent (WAS) injection process to heavy oil using micromodel generated from thin section of a real rock which has rarely attended in the available literature. In this study, a one-quarter five-spot glass micromodel was deployed to examine the effect of flow media topology on microscopic displacements as well as macroscopic efficiency of WAS process. The micromodel was initially saturated with the heavy oil, and then the hydrocarbon solvent and water were injected alternately into it. The observations confirmed that WAS injection scheme is an effective method for the... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore...