Sharif Digital Repository

Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslinking and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

Chitosan was modified with polyacrylonitrile (PAN) through ceric-initiated graft copolymerization. The chitosan-g-PAN product was saponified using sodium hydroxide aqueous solution to prepare a novel superabsorbent hydrogel, H-chitoPAN. Duration of completing the saponification reaction as well as the water absorbency capacity of the hydrogel was decreased with increasing the alkaline concentration. Either chitosan-g-PAN or H-chitoPAN was characterized by FTIR spectroscopy and DSC, TGA, and DTG thermal methods. According to FTIR, all the nitrile groups were converted to carboxylate and carboxamide groups. Both modified chitosans exhibited enhanced thermal stability over chitosan. The... 

Polyacrylonitrile (PAN) grafted chitosan was prepared by ceric-initiated graft polymerization of acrylonitrile onto chitosan in a homogenous medium. The copolymer chitosan-g-PAN product was then hydrolyzed to yield a novel smart hydrogel (H-chitoPAN) with superabsorbing properties. The influence of add-on values as well as temperature and time of hydrolysis of the initial chitosan-g-PAN on swelling behavior of the hydrogel was evaluated in water and various salt solutions. The swelling kinetics of the superabsorbing hydrogel was studied as well. The hydrogels exhibited ampholytic and pH-sensitivity characteristics. Several sharp swelling changes were observed in lieu of pH variations in a... 

A novel, polysaccharide-based, superabsorbent hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto kappa-carrageenan (κC), using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC-g-polymethacrylic acid (κC-g-PMAA) formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The effect of grafting variables, including MBA, MAA, and APS concentration, was systematically optimized to achieve a hydrogel with the maximum possible swelling capacity. The swelling kinetics in distilled water and various salt solutions were... 

Polyacrylonitrile (PAN) grafted chitosan was prepared by ceric-initiated graft polymerization of acrylonitrile onto chitosan in a homogenous medium. The copolymer chitosan-g-PAN product was then hydrolyzed to yield a novel smart hydrogel (H-chitoPAN) with superabsorbing properties. The influence of add-on values as well as temperature and time of hydrolysis of the initial chitosan-g-PAN on swelling behavior of the hydrogel was evaluated in water and various salt solutions. The swelling kinetics of the superabsorbing hydrogel was studied as well. The hydrogels exhibited ampholytic and pH-sensitivity characteristics. Several sharp swelling changes were observed in lieu of pH variations in a... 

Chitosan was modified with polyacrylonitrile (PAN) through ceric-initiated graft copolymerization. The chitosan-g-PAN product was saponified using sodium hydroxide aqueous solution to prepare a novel superabsorbent hydrogel, H-chitoPAN. Duration of completing the saponification reaction as well as the water absorbency capacity of the hydrogel was decreased with increasing the alkaline concentration. Either chitosan-g-PAN or H-chitoPAN was characterized by FTIR spectroscopy and DSC, TGA, and DTG thermal methods. According to FTIR, all the nitrile groups were converted to carboxylate and carboxamide groups. Both modified chitosans exhibited enhanced thermal stability over chitosan. The... 

Various natural and modified polysaccharides (i.e. arabic gum, tragacanth gum, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) were modified using ceric-initiated graft polymerization of acrylonitrile under inert atmosphere. Grafting was confirmed using spectral (FT-IR) proofs. The grafting parameters were determined by conventional methods. Thermal characteristics of the homopolymer-free copolymers were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) under nitrogen atmosphere. The major thermal transitions as well as the activation energy of the major decomposition stages were... 

A novel and smart biopolymer-based hydrogel was synthesized by graft copolymerization of acrylic acid onto the salep backbones. The new superabsorbent hydrogel was synthesized via simultaneous crosslinking and graft copolymerization of acrylic acid (AA) monomer onto salep backbones using radiochemical methods. In radiochemical methods, γ-rays as initiator, energy source and crosslinker are applied. In our experiments, the effects of reaction variables such as relative contents of salep and AA, as well as γ-rays total dose were examined. According to water absorbency of the entitled network, the best synthesis condition is reported. FTIR spectroscopy, SEM photograph and TGA analysis were used... 

Chitin was extracted from shrimp shells and then deacetylated to obtain chitosan. The degree of deacetylation of the chitosan was determined to be 0.76 using pH-metric titration. A large number of cyanide functional groups were introduced onto chitosan by grafting with polyacrylonitrile as an efficient way of modification. The graft copolymerization reactions were carried out under argon atmosphere in a homogeneous aqueous phase (containing a small portion of acetic acid) by using eerie ammonium nitrate as an initiator. Evidence of grafting was obtained by comparing FTIR spectra of chitosan and the graft copolymer as well as solubility characteristics of the products. The synthetic... 

A series of water-soluble ABA triblock copolymers consisting of a polyethylene glycol central block joined to two blocks of six different homopolymers have been synthesized via simple solvent-free and ecofriendly routes and characterized by FTIR and 1HNMR spectroscopy. Dispersing and slump-retaining abilities of the copolymers in cement slurries were evaluated by mini-slump spread method. Rheological measurements of samples with the best performance were carried out using a rate-controlled coaxial cylinder viscometer. The test results indicate that the dispersing power of the copolymers in cement pastes is strongly affected by the structure and degree of polymerization of the monomers  

A novel biopolymer-based superabsorbent hydrogel was synthesized through chemical crosslinking by graft copolymerization of partially neutralized acrylic acid onto the hydrolyzed collagen, in the presence of a crosslinking agent and a free radical initiator. The Taguchi method, a robust experimental design, was employed for the optimization of the synthesis reaction based on the swelling capacity of the hydrogels. This method was applied for the experiments and standard L16 orthogonal array with three factors and four levels were chosen. The critical parameters that have been selected for this study are crosslinker (N,N′-methylene bisacrylamide), initiator (potassium persulfate), and monomer... 

In this research, low density polyethylene (LDPE) and poly ethylene-co-vinyl acetate (EVA) were used as polymeric materials. The methods used to produce LDPE and EVA was Film Blowing and ThermalDry Phase Inversion. The amount of permeability, diffusivity and solubility of O2 and CO2 through above polymers were obtained and also the effect of temperature, pressure and film thickness for LDPE was measured. The Barometric method was considered and measurements were based on ASTM standard. To study film cross-section morphology in EVA, Scanning Electron Microscopy (SEM) was applied. From results we considered that the amount of permeability and solubility were decreased by increasing film... 

Fast-swelling highly porous superabsorbent hydrogels were synthesized through a rapid radical polymerization under normal atmospheric conditions. To synthesize a biopolymer-based superabsorbent hydrogel, 2-hydroxyethyl acrylate (HEA) and sodium acrylate (AANa) were grafted on the starch backbone in an aqueous solution. The graft copolymerization reaction was carried out in the presence of ammonium persulfate (APS) as an initiator and N, N′-methylenebisacrylamide (MBA) as a cross-linker in a homogeneous medium. The chemical structure of the hydrogels was confirmed by FT-IR spectroscopy and thermogravimetric analysis (TGA). The morphology of the samples was examined by scanning electron... 

In this paper, synthesis and swelling behavior of a novel superabsorbent hydrogel based on kappa carrageenan (κC) and polyacrylonitrile (PAN) was investigated. To achieve partially hydrolyzed κC-PAN hydrogel, physical mixture of κC and PAN was hydrolyzed by NaOH solution. During alkaline hydrolysis, the nitrile groups of PAN are converted to a mixture of hydrophilic carboxamide and carboxylate groups follow by in situ crosslinking of the grafted PAN chains. The reaction variables affecting on the swelling capacity of the hydrogel were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Under the optimized conditions concluded, super swelling hydrogel... 

Various natural and modified polysaccharides (i.e. arabic gum, tragacanth gum, xanthan gum, sodium alginate, chitosan, sodium carboxymethyl cellulose, hydroxyethyl cellulose, methyl cellulose) were modified using cericinitiated graft polymerization of acrylonitrile under inert atmosphere. Grafting was confirmed using spectral (FT-IR) proofs. The grafting parameters were determined by conventional methods. Thermal characteristics of the homopolymer-free copolymers were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) under nitrogen atmosphere. The major thermal transitions as well as the activation energy of the major decomposition stages were... 

In this paper, the well-known effective medium approximation (EMA) and coupled dipole approximation (CDA) methods are employed to study the optical properties of a metal nanoparticle-block copolymer (MNP-BCP) nanocomposite. This approach is applied to study a system consisting of small gold spherical nanoparticles randomly distributed in the cylindrical micelles of a di-BCP. At first, the EMA method is used to obtain the effective dielectric function of a semi-metallic cylinder. Then, the extinction spectrum of the hexagonal 2D-array of semi-metallic cylinders is obtained by the CDA method. This procedure makes it possible to study simultaneously both the electromagnetic extinction of MNPs... 

Polyacrylonitrile (PAN) was grafted onto carboxymethyl cellulose (CMC) sodium salt backbones by using cerie ammonium nitrate (CAN) as an initiator. The graft co-polymer, CMC-g-PAN, was hydrolyzed by NaOH solution to yield hydrogel, H-CMC-g-PAN. The nitrile groups of CMC-g-PAN were completely converted to a mixture of hydrophilic carboxamide and carboxylate groups during alkaline hydrolysis, followed by in situ crosslinking of the grafted PAN chains. The structure of the products was confirmed by FTIR spectroscopy. The synthetic parameters affecting the swelling capacity of the hydrogel (i.e., CMC-g-PAN add-on value, the hydrolysis time and temperature, and concentration of NaOH) were... 

The effect of the nucleating agent masterbatch carrier resin on the nonisothermal crystallization of a pipe-grade polypropylene block copolymer was investigated at three different cooling rates using differential scanning calorimetry (DSC). Bis(3,4-dimethylibenzylidene) sorbitol (DMDBS), a well-known, third-generation sorbitol derivative, was used as a nucleating agent in this study. Crystallization kinetic parameters obtained from DSC cooling curves showed that incorporation of a nucleating agent by means of a masterbatch increased the crystallization rate by approximately two times compared to that of the sample with the same concentration of nucleating agent without the use of a...