Sharif Digital Repository

The present study deals with vibrational behavior of two joined cross-ply laminated conical shells. The natural frequencies and mode shapes are investigated. The joined conical shells can be considered as the general case for joined cylindrical-conical shells, joined cylinder-plates or cone-plates, cylindrical and conical shells with stepped thicknesses and also annular plates. Governing equations are obtained using thin-walled shallow shell theory of Donnell type and Hamilton's principle. The appropriate expressions among stress resultants and deformations are extracted as continuity conditions at the joining section of the cones. The equations are solved assuming trigonometric response in... 

The delamination phenomenon has been studied in macroscopic scale by different approaches. Here, using micro-mechanical models, it is tried to find the possible relationship between the problem and the stress fields around a fiber. Using the ideas and the results on the free surface cracking of unidirectional composite, the FEM model is developed. The model verification is done by comparing the results by the results obtained in presence of damaged incorporated by the damage theory. Here, on the free surfaces fiber/matrix debonding is applied as a composite damage and the results show a good agreement with the available results  

Within elasticity theory, the reduced form of a displacement field is obtained for general cross-ply composite laminates subjected to a bending moment. The firstorder shear deformation theory of plates and Reddy's layerwise theory are then utilized to determine the global deformation parameters and the local deformation parameters appearing in the displacement fields, respectively. For a special set of boundary conditions an elasticity solution is developed to verify the validity and accuracy of the layerwise theory. Finally, various numerical results are presented within the layerwise theory for edge-effect problems of several cross-ply laminates under the bending moment. The results... 

Free-edge effects in laminated, circular, cylindrical shell panels subjected to hygrothermal loading are studied by utilizing displacement-based technical theories. Starting from the most general displacement field of elasticity for long, circular, cylindrical shells, appropriate reduced displacement fields are determined for laminated composite shell panels with cross-ply and antisymmetric angle-ply layups. An equivalent single-layer shell theory is used to analytically determine the constant parameters appearing in the reduced displacement fields. A layerwise shell theory is then employed to analytically determine the local displacement functions and the boundary-layer interlaminar... 

The buckling analysis of cross-ply laminated conical shell panels with simply supported boundary conditions at all edges and subjected to axial compression is studied. The conical shell panel is a very interesting problem as it can be considered as the general case for conical shells when the subtended angle is set to 2π and also cylindrical panels and shells when the semi-vertex angle is equal to zero. Equations were derived using classical shell theory of Donnell type and solved using generalized differential quadrature method. The results are compared and validated with the known results in the literature. The effects of subtended angle, semi-vertex angle, length, thickness and radius of... 

Vibration analysis of simply supported rotating cross-ply laminated stiffened cylindrical shell is performed using an energy approach which includes variational and averaging method. The stiffeners include rings and stringers. The equations are obtained by Rayleigh-Ritz method and Sander's relations. To validate the present method, the results are compared to the results available in other literatures. A good adoption is observed in different type of results including isotropic shells, rotating laminated shells, stiffened isotropic shells and stiffened laminated shells. Then, the optimization of parameters due to shell and stiffeners is conducted by genetic algorithm (GA) method under weight... 

Boundary-layer effects in lengthy cross-ply laminated circular cylindrical shell panels under uniform axial extension are investigated by two analytical solutions. First, Reddy's layerwise theory with state-space approach is utilized to determine the local interlaminar stresses. In this method, the general displacement field is discretized through the shell thickness by a linear shape function. When the shell panel is subjected to an axial force, the axial strain is estimated by an equivalent single-layer theory. Second, the stress-function approach along with Fourier series expansion is applied to develop a novel elasticity solution. The elasticity solution, which is based on simply-support... 

In this study the effect of stress field on delamination and fiber/ matrix debonding in laminated composite panels is investigated from the micro-mechanical point of view by means of 3-D Finite Element Models. Specifically, the behavior of two-layer cross-ply symmetric laminates made up of SCS-6/Ti-24Al-11Nb Intermetallic Matrix Composite (IMC) during cooling from the processing temperature is studied. The results show that large plastic strains occur at the fiber/ matrix interface at the fiber end on the laminate free edge which may eventually extend to the interface of the layers of the laminate inflicting delamination damage. This phenomenon is more serious at the corner areas of the...